Question about Hyundai Cars & Trucks

Open Question

Santa Fe remote starter is in valet mode. How do I turn it off?

Remote is set on valet mode. How do I change it so the car will start

Posted by Anonymous on

Ad

4 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: 2003 hyundai santa fe car alarm

I had the same problem a while back. What I did was disconnect the battery for a minute and I havent had that problem since.

Posted on Feb 14, 2009

Ad
MECP Guy
  • 344 Answers

SOURCE: Remote Car starter won't work

put your key in the ignition, then remote start it, if it starts, you need to either move the transponder loop of key or reprogram the transponder or take it to a remote starter shop

Posted on Jan 16, 2010

johnjnail
  • 1702 Answers

SOURCE: my remote is broken on

use the key to lock and then unlock the driverside door then within 20 seconds start the engine this will reset the alarm, if the car still will not start then try the same thing in the passanger side door if it still will not start the the problem is most likely not the alarm system.....good luck

Posted on Aug 07, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2011 ford escape limited the remote start stopped workng


Remote starter in valet mode Symptoms: Lock and Unlock buttons work as normal, but pressing Start does not produce any response from the vehicle.
Causes: Someone accidentally pressed the combination of buttons to put the car into valet mode, usually when the remote is in a purse or pocket. Also, many remote car starters will revert to valet mode when the vehicle is disconnected for service.
Hood Pin Has Broken or Failed Symptoms: Pressing Start results in several flashes of the parking lights but no start. If equipped, Lock and Unlock still function.
Cause: In most cases, the under-hood pin switch is broken or corroded.
Remote Control Loses Programming Symptoms: Pressing any button on the remote results in no response from vehicle.
Cause: It is rare, but does happen - in most cases, this is caused by a dead battery in the vehicle or the battery having been disconnected when being serviced.
Remote starters usually have some type of non-volatile memory to retain things like programming features and remote control codes. Like any "computer" device, sometimes they lose memory. When this happens, simply call the store that installed it for you. In some cases, they may be able to tell you how to reprogram it over the phone. Other times, you will have to return to the store for a technician to program it. In any case, this is rare with higher-end remote starters.
Remote is in Second-car Mode Symptoms: Pressing any button on the remote results in no response from vehicle.
Causes: A combination of buttons were accidentally pressed, which put the remote in second-car mode.
Again, this is very rare, but happens from time to time. Many remote car starter remote controls have the ability to start two vehicles. If the remote is accidentally placed into second-car mode, it will not start or operate vehicle #1.
Simply read your owner's manual or call your installer for directions on how to revert the remote back to car #1.

Dec 08, 2016 | 2011 Ford Escape

1 Answer

Remote start locks doors but won't turn over engine, installed by dealer, two remotes do the same. Changed batteries in remote.where is the kill switch?


most remote starters have a valet feature to turn off the starter but allow locks/trunk to continue to work. all brands vary..

Jan 04, 2016 | 2013 Hyundai Santa Fe

1 Answer

4x4 diesel. Why can't doors be unlocked or locked?


their is a way to do it but recheck battery first sometimes the relearn process doesnt work or the fob itself is dead also if auto /remote start will need dealer to flash fob ---- 2002 santa fe and followed programming instructions and eventually was able to program the new remote. But, I did not realize I had to program my existing remote at the same time. Since, I have retried programming both remotes many times with no success--the new one works, but the old one won't. The instructions were: 1) Locate switch under dash, behind fuse box; 2) Turn ignition switch on, but don't start engine; 3) Wait 5 seconds, set memory switch to SET position; 4) Press remote LOCK button; press second remote transmitter LOCK button; 5) Set memory switch to OFF; 6) Switch ignition OFF. 7) Confirm programming by locking and unlocking vehicle.
Remote Key Programming Hyundai Forums Hyundai Forum

Sep 23, 2015 | 2003 Hyundai Santa Fe

1 Answer

Car starter on Lincoln mkx won't start and honks 6 times .... What does that mean


6 honks is in valet mode
put ignition key to ON position, press and hold brake, press remote start 3 times. it will honk to let you know it is out of valet mode.

Feb 24, 2012 | 2007 Lincoln MKX AWD

1 Answer

I need instructions to program keyless entry remote for 2002 Hundai Santa Fe


For a 1994 to 2006 Sonata, a 2001 to 2006 Elantra, a 2000 to 2006 XG350 or a 2001 to 2006 Santa Fe, you will need to access alarm system control module. On most of those vehicles it is located on the driver's side fascia panel. But on the Sonata, the facia panel is in the center.

  • 2 Once you have found this module, you will want to ensure that the memory switch is in the OFF position. Then turn the ignition on.
  • 3 Wait 5 seconds and set the memory switch to SET position and then press the remote transmitter lock button to send the code to the alarm system control module.
  • 4 If you would like to program a second remote transmitter then you will need to press second remote transmitter lock button.
  • 5 Next set the memory switch to off, then turn the ignition off. You can confirm your programming by locking and unlocking the vehicle with both of the remotes. good luck my friend
  • Feb 08, 2012 | Hyundai Cars & Trucks

    3 Answers

    How to program 2004 Hyundai Santa Fe Keyless Entry Remote


    Synchronization
    When
    System malfunction. Remote control added or replaced.
    How
    Access alarm system control module located under driver's side lower fascia Fig. 2 . Set memory switch to SET position. Press remote control lock or unlock button. Set memory switch to OFF position. Confirm synchronization has been successful by locking and unlocking vehicle. Repeat procedure for second remote control. Synchronization can also be carried out using diagnostic equipment.
    NOTE: A maximum of 2 remote controls can be programmed. NOTE: If remote control fails, system can be deactivated as detailed in the owner's handbook.

    Mar 23, 2010 | 2004 Hyundai Santa Fe

    3 Answers

    Hello I have a Orbit remote starter (model Hybrid) that was installed on my truck (automatic transmission) 2 years ago. As of yesterday, it won't start my car as it has always done (from the same...


    the starter is in valet mode. your led on your attenna is probably on all the time right??? turn the key on and off 5 times or check your manual to see how to get the starter off of valet mode. read your manual

    Jan 14, 2010 | Ford Sport Trac Cars & Trucks

    1 Answer

    Remote Car starter won't work


    put your key in the ignition, then remote start it, if it starts, you need to either move the transponder loop of key or reprogram the transponder or take it to a remote starter shop

    Jan 13, 2010 | 2003 Honda CR-V

    3 Answers

    2001 Santa Fe Key fob Programming


    change the batteries then start the car and close it and press the key it should work

    Nov 15, 2009 | 2005 Hyundai Santa Fe

    2 Answers

    Remote Start doesn't work


    manually lock the door with the key this may reset the alarm

    Dec 16, 2008 | 2006 Lincoln Zephyr

    Not finding what you are looking for?
    Cars & Trucks Logo

    Related Topics:

    1,346 people viewed this question

    Ask a Question

    Usually answered in minutes!

    Top Hyundai Experts

    yadayada
    yadayada

    Level 3 Expert

    76848 Answers

    Colin Stickland
    Colin Stickland

    Level 3 Expert

    22246 Answers

    Jeffrey Turcotte
    Jeffrey Turcotte

    Level 3 Expert

    8582 Answers

    Are you a Hyundai Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...