Question about 2007 Lexus ES 350
Vsc and engine light on
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
the cabin filter is locate on the passanger in the glove box. to get to it u must remove the shelf in the glove box by simply tugging it from the left side, then u will see at the back of the glove box a section that u can remove. once removed u will see a white compartment with a removable front, remove that and youll see filter
Posted on May 07, 2009
ur vsc light will come on whenever you have a check eng light on. best thing to do is bring ur car to a local and have them scan ur car. your car should still be under factory warranty any repairs wont cost u anything.
just from my experience a 2007 ES with a check eng light is most likely a faulty a/f sensor or a loose gas cap
Posted on May 07, 2009
Jim , you can change both the air and cabin air filters. There are a series off pop pins covering the air intake. If you depress the center button with a BIC pen tip and then lift at the side they will pop up. They are a plastic spring load so be gentle.
Underneath you will find the intake housing and filter. Cabin air filter should be behind the glove box area I
FYI , Lexus has a patented high volume oil filter. If you change your own , stcik with genuine for longer life, unless you are certain the aftermarket matches
Posted on Nov 09, 2009
SOURCE: the VSC and Check engine
Toyotas and Lexus cars have some unique feaures. If your fuel cap is loose or the O2 sensors on the exhaust are faulty this results in an emission problem and the engine computer unit (ECU) engages the check engine light and disables the VSC (the VSC light comes on to warn you that it has been disabled). However you have p0500 code which says the car has no speed sensor signal. The seed sensor is located on the side of the final drive from the transmission and its job is to measure the speed of rotation of the output shaft. The ECU will compare the signals from this shaft along with the speed sensors in the wheel hubs. If there is a difference between these signals the VSC is engaged to apply braking effort to which ever wheel is slipping (running faster) than the other or that the transmission speed sensor would warrant.
So you either have an emission fault has fed back to the VSC and speed sensor missing (p0500) condition, or you have a faulty sped sensor which has tripped the VSC light and in turn the CEL.
Check your fuel filler cap is on tight, turn radio off and disconnect the negative lead to the battery for 5 minutes (this should clear the ECU memory of the code error). If p0500 error and CEL and VSC lights come back on then check the electrical connection to the speed sensor. Ensure it is clean and making a good contact, check the wiring for continuity. If everything else looks good consider changing the speed sensor.
Posted on Sep 14, 2010
Tips for a great answer:
Feb 22, 2016 | Lexus ES 350 Cars & Trucks
Apr 11, 2015 | Lexus Cars & Trucks
Feb 08, 2015 | Lexus ES 350 Cars & Trucks
Jul 04, 2011 | 2007 Lexus ES 350
Mar 24, 2010 | 2002 Toyota 4Runner
Jun 22, 2009 | 2007 Lexus GX470
Feb 24, 2009 | 2007 Lexus ES 350
223 people viewed this question
Usually answered in minutes!