Question about Chevrolet Silverado 1500

Open Question

How do you replace led blubs on my leer camper shell

Posted by Anonymous on

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

geo5734036
  • 528 Answers

SOURCE: I just put a leer camper shell on my 1991 chevy

You should be able to tap into either brake light as long as your turn signals are separate from your brake lights. If they are the one and same bulb, you will have to add a diode to keep that 3rd light on the camper from flashing with the turn signal. The diode is a 1 way item, meaning it can be installed backward and the 3rd light won't work. You could go to a local stereo shop to radio shack to get the diode and they can show you which way to install as well as ensure you have the correct parts to install.

Posted on Nov 08, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Brake lights quit working. turn signals fine.has fiberglass camper shell. camper brake light works. tried new fuses and bulbs ,no help


please explain more fully exactly the problem as iam unsure here ,camper body ??? tried the earth wires ?? if i knew what i was dealing with i might have a better idea

May 21, 2011 | GMC Sonoma Cars & Trucks

2 Answers

I just put a leer camper shell on my 1991 chevy truck now how do i wire up the brake light on the camper shell so that the light does not blink when i put on the turn signal i heard there is a wire you tap...


You should be able to tap into either brake light as long as your turn signals are separate from your brake lights. If they are the one and same bulb, you will have to add a diode to keep that 3rd light on the camper from flashing with the turn signal. The diode is a 1 way item, meaning it can be installed backward and the 3rd light won't work. You could go to a local stereo shop to radio shack to get the diode and they can show you which way to install as well as ensure you have the correct parts to install.

Nov 07, 2010 | 1991 Chevrolet C1500

2 Answers

I have a rear brake light on a camper shell I want to hook up on a 2006 dodge dakota. What is the best way to do this?


Good Morning, I have seen this done and done this same thing before. Normally you will just tie into your bake light at the tail light depending on how it (the camper) is set up. You could also tie into the one into the third brake light. I hope this helps you out it really isn't bad. If you have any more questions pleae feel free to let m know.
Thanks,
Joey

Sep 02, 2010 | 2006 Dodge Dakota

2 Answers

My 2000 Tacoma 6 Cylinder engine warning light came on? Had oil changed yeasterday. All fluid levels are fine. What is happening? Safe to drive? Bjorn


I have a 2000 Tacoma Extra Cab Pre Runner. When I put on my camper shell my check engine light comes on. Oil levels and tires are fine. I took my shell off and light goes off. I hauled alot of wood and the light did not come on. Why would the camper shell be trip-en my light? Ofcourse I am gunna get the code checked next week.

Nov 12, 2009 | 2000 Toyota Tacoma PreRunner

1 Answer

Glow plug indicator light


Hi, if the egnine start alright. then it will be the LED or just a blub need replacing.

Jul 21, 2009 | 2002 Ford SVT Focus

1 Answer

I have a '05 Ford Ranger. I bought a camper shell that has a Third Brake Light and I would like to hook it up so it works when I apply the brakes. Hooking the camper shell 3rd Brake lights to the p/u brake...


there will be four wires going to your lights you will have to test each wire to see which wire is for the brake light and tap into that wire. on all ford rangers one bulb controls everything so you can't just hook it up thru your bulb so you will have to hookit up thru your wires. it's not that difficult but you will have to have a helping hand. and test till you find the one for the brakes only.

Jun 09, 2009 | 2005 Ford Ranger

1 Answer

Replacing a headlight


go to your parts store and purchase the new halegeon blub. READ very carefully the instructions on the box. DO NOT TOUCH the new blub lens.

Carefully pull and twist out the old blub and remove it from its base. Using the special material or a glove, install the new blub in the base, and then carefully insert it back into the headlight shell.
Bill

Nov 18, 2008 | 2004 Buick Rainier

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

87 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...