Question about 1992 Jeep Cherokee Briarwood

2 Answers

We have no brake lights on our 92 jeep cherokee, we have checked fuses, changed bulbs and replaced brake switch still no brakes..What else could it be?

Posted by on

  • Jewell Payne
    Jewell Payne Jan 02, 2009

    We forgot about the big fuses under the hood,pass. side and there our problem was...Thank You for the help..

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

There is also a switch attached to the brake pedal that can go -- happened on my 2003 laredo.  Not sure what it is called but ask at any autopartstore they will know.

Posted on Feb 19, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Try checking ur fuses first if that dont work it could be a wiring problem

Posted on Jan 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does the 2000 jeep grand cherokee have a lamp outage module


If you have no brake lights, and you've checked the fuses and the bulbs then, the problem is likely a the brake light switch on the brake pedal arm. The switch needs to be adjusted or replaced.
Hope this helps.

Feb 23, 2015 | 2000 Jeep Grand Cherokee

2 Answers

Third brake light on '01 Jeep Grand Cherokee not working.


check the light socket it could be lose on the wires or just the light

Jul 12, 2012 | 2001 Jeep Grand Cherokee

1 Answer

No brake lights


Check for a bad fuse in the fuse panel under the dash and the brake light bulbs in the brake light housings for bad bulbs. Next check the brake light switch at the brake pedal to see if there is power going to it. With a voltmeter check the switch and if it is bad replace it. If the switch is good and has power to it, check the wiring from the switch to the brake light housing for a shorted wire

Sep 20, 2011 | 1999 Jeep Grand Cherokee

2 Answers

Brake lights dont work


Check the brake light switch, it is down on the brake pedal lever, you can dis-connect the wire connector at the brake light switch and check for broken wires at the connector, and then jumper the connector with a paper clip, if the brake lights come on then replace your brake light switch.

There might be more than one switch attached to the brake light pedal lever, the brake light switch usually only has two wires going to it when there are two switches.

If there is no problem with the brake light switch then you can suspect the turn-signal switch to be at fault, as all of the running lights, turn-signals, brake lights, and hazard lights are all ran through the turn-signal switch. You can also try stepping on the brake pedal and wiggle around the turn-signal switch and see if the brake lights flicker or come on.

Apr 26, 2010 | 2000 Jeep Grand Cherokee

1 Answer

2005 grand cherokee brake lights out. changed bulbs didnt work. third brake light is working checked fuses ok .


checked all fuses even under hood? may have bad signal switch or bad brake light switch yes even if 3rd brake works.also check wiring under rear fender by bumper thats were wire harness is hope this helps.

Oct 09, 2009 | 2005 Jeep Grand Cherokee

2 Answers

1997 Jeep grand cherokee


Sounds like your brake light switch needs to be replaced.  It is attached to the brake pedal and should cost you around $20 from an auto parts store.  If the fuses and bulbs are good there is a 99% chance it is the brake light switch.  Hope this helps!  Thanks for an honest rating and for using FixYa.

May 19, 2009 | 2000 Jeep Grand Cherokee

1 Answer

No brake lights on 2000 jeep grand cherokee limited


if you have a park light working change your stop light switch it is broken.

Apr 15, 2009 | 2000 Jeep Grand Cherokee

1 Answer

No brake lights on 92 jeep cherokee


check to see if you have power going to the light sockets and if you do have power try changing the light sockets . thats what i had to do with my jeep

Jan 02, 2009 | 1992 Jeep Cherokee Briarwood

Not finding what you are looking for?
1992 Jeep Cherokee Briarwood Logo

Related Topics:

159 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6869 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...