Question about 1994 Chevrolet S-10

Open Question

I keep blowing the ecmi fuse as soon as i turn on the ignition in my 94 s10 truck

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 314 Answers

SOURCE: 95 chev truck blows fuses

Your truck has a trailer hitch? Right! Check out the wiring! Frankster016

Posted on Oct 19, 2008

Ad
  • 126 Answers

SOURCE: I had the starter replaced on a 1998 s10 and now

sounds like the ignition wire on starter is grounding on exhaust or engine block.

Posted on Apr 28, 2009

gypsycat00
  • 224 Answers

SOURCE: 94 chevy s10 blowing fuse

Chances are, you have a short somewhere in the wiring that is causing too much amperage to pass through the fuse causing it to blow. Use a decent voltmeter that will show opens and shorts to test continuity with the wires that run to the ignition.

Posted on Jul 11, 2009

  • 2309 Answers

SOURCE: 1996 chevy s10 blazer 4x4 keeps blowing taillight

somewhere afterthat fuse is a dead short, not much fun but its detective work from here, it helps if you have a wiring diagram and could save you time

Posted on Dec 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 2009 Toyota Corolla. Recently the wiper fuse started blowing. The Fuse keeps blowing as soon as the ignition is turned on.


could be anything and without a look myself i couldnt tell you try disconnecting the wiper switch and see what happens is about the best i can come up with was thinking of the self park but with motor disconnected and it still blows ?? thats that out the equation .

Jan 08, 2017 | Toyota Corolla Cars & Trucks

1 Answer

1989 chevy s10 ignition/gages fuse keeps blowing


If you think there is a problem with instrument cluster, unplug the instrument cluster, see if it still blows the fuse. Could be a wiring circuit problem, somewhere? Maybe fuse box issue?
Sometimes, I use a test light in place of the fuse, to keep from blowing all my fuses. If the test light comes on, the circuit is going to ground, somewhere. If the instrument cluster is unplugged, then hopefully, that is ruled out.

Oct 12, 2016 | Cars & Trucks

1 Answer

ECM 1 fuse keeps blowing on my 94 S10 blazer,,what will cause this problem?


A bad relay or a shorted wire. Pull the relay, turn the ignition on. Fuse pops, bad wire from the ignition switch to the fuse/relay panel. If it doesn't, swap relays in the panel. Turn it on, if the fuse pops, bad wire to the ECM or the ECM has shorted internally. If it doesn't pop, replace the relay.

Jul 30, 2015 | Cars & Trucks

1 Answer

Ignition fuse switch keeps blowing


you have a short in that circuit chck your harness for wiring that might be exposed to ground or pinched

Apr 13, 2014 | 2006 Kia Sedona

1 Answer

Toyota tarago 94 wiring diagram


Could be a short circuit on ignition wires or a broken ignition switch. Or a short circuit on starter wires or inside the starter motor itself.

Jan 21, 2014 | Pontiac Cars & Trucks

1 Answer

Wiring diagram 94 chevy s10


ECM b powers the fuel pump relay, the engine computer, and other components.
You could try pulling the pump relay to see if the short is in the fuel pump circuit. Otherwise, you may need a shop manual to find out everything in that circuit.

Sep 03, 2013 | Chevrolet Cars & Trucks

1 Answer

Fuse keeps blowing on ignition coil as soon as i turn key


Check the wiring from the fuse on as it apperas that you have a dead short. Take the wire off the coil and see if the fuse blows as the coil may be at fault

Mar 02, 2013 | 2000 Pontiac Sunfire

1 Answer

Ikeep blowing the ecm fuse as soon as i turn on the ignition and when i hoo up the positve cable to the battery i get a big spark


CHECK FOR IGNITION WIRES SHORT TO GROUND.I HAVE SEEN A BAD FUEL PUMP BLOW ECM FUSE.REMOVE THE FUEL PUMP FUSE DISABLE FUEL PUMP AND SEE IF FUSE KEEP BLOWING.

Sep 01, 2009 | 1994 Chevrolet Cavalier

1 Answer

94 chevy s10 blowing fuse


Chances are, you have a short somewhere in the wiring that is causing too much amperage to pass through the fuse causing it to blow. Use a decent voltmeter that will show opens and shorts to test continuity with the wires that run to the ignition.

Jul 11, 2009 | 1994 Chevrolet S-10

Not finding what you are looking for?
1994 Chevrolet S-10 Logo

Related Topics:

33 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...