Question about 1996 Jeep Grand Cherokee

1 Answer

2001 GC driver door keylock doen't work

Ectric lock works but key does not open door

Posted by on

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Locate horn on my Jeep Grand Cherokee

Posted on Jan 06, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Keyless Entry


sounds to me like it is operating as a key should . door not locking when open keeps people from locking keys inside .

Sep 25, 2016 | Cars & Trucks

2 Answers

Why won't driver door key unlock door


Hi. you will need to replace the door handle lock insert.

Jul 08, 2014 | 2001 Volkswagen Jetta TDI

2 Answers

2001 Chevrolet Impala Keyless Entry


Common problem, a small switch in the door lock breaks and does not activate the lock, all works from the key not remote, driver door recognises door not locked will unlock all doors, to repair you have to replace drivers door lock or just live with the key, I do
Merry Christmas

Dec 15, 2013 | 2001 Chevrolet Impala

1 Answer

2001 Cadillc Deville DTS door lock stopped accepting key - no fob either!


I experienced the exact problem with my 2001 DTS. The solution that worked for me is as follows:
- spray some WD40 lubricant into the keylock
- work the key in and out of the lock assembly several times
- spray more WD40 lubricant into the keylock
- continue to work the key in and out of the lock assembly
- the key should eventually insert all the way into the lock and turn the lock assembly
I hope this works for you.

Sep 04, 2012 | 2001 Cadillac DeVille DTS

1 Answer

My door is locked and the key doesn't open the door and remot is not working since 2 year


well unless you want to break a window, your going to need to have the remote re-programmed, or the keylock serviced.

Aug 28, 2009 | 2002 Volkswagen Passat

1 Answer

Keys and Keyfob do not open 2001 explorer from outside


Spray some WD-40 into the key cylinders and then try working the key. The locks seize up because you keep using the FOBs.

Mar 25, 2009 | 2001 Ford Explorer

1 Answer

2001 Jeep GC Laredo - Interior Lights stay on while driving


Sounds like a fuse issue. check your panel for popped accessory fuse.

the overhead light issue may be the door close switch

Feb 17, 2009 | 2001 Jeep Grand Cherokee

1 Answer

Program my remote


Program your factory keyless entry functions
For 2001+ Tacomas equipped with a factory alarm or keyless entrymag-glass_10x10.gif, here are some programming options that allow you to adjust the way your locks work.
The first programming option allows you to set the entry unlock to: (A) unlock the driver door with one push, and the remaining doors with a second push OR (B) unlock all of the doors with a single push.
  • Open the driver's door. Remove the key from the ignition switch.
  • (Complete these steps within 40 seconds)
    1. Insert the key into and remove it from the ignition switch 2 times.
      (IN - OUT - IN - OUT)
    2. Close, then open the driver's door 2 times.
      (SHUT - OPEN - SHUT - OPEN)
    3. Insert the key into and remove it from the ignition switch 1 time.
      (IN - OUT)
    4. Close, then open the driver's door 2 times.
      (SHUT - OPEN - SHUT - OPEN)
    5. Insert the key into the ignition switch and leave it in.
    6. Close the driver's door.
    7. Turn the key from LOCK to ON 4 times, ending at LOCK
      (LOCK - ON - LOCK - ON - LOCK - ON - LOCK - ON - LOCK)
    8. Wait for the locks to stop, then remove the key from the ignition switch.
  • On the key fob, press and release both LOCK and UNLOCK buttons at the same time.
    1. [For all doors unlock] press and release the UNLOCK button.
    2. [For driver door unlock] press and release the LOCK button.
  • Open the driver's door. The programming is complete. If programming did not occur, start over.

Jan 13, 2009 | 2001 Toyota Tacoma

1 Answer

I also have 1996 t & c with door actuator problems


The mechanical portions may be jamming, my Volvo got so bad on this, that I had to remove the keylock rod from the driver side.
Before going that far though, try spraying some lubricant on all of your lock's mechanical parts. If it's purely a mechanical problem, this will likely let your locks work correctly.
However, if one of the rods is bent, or the keylock is severly damaged, this will also prevent your locks from working correctly. Bent rod+replace that rod or assembly. If it's the keylock, you will have to get a new one.

Aug 27, 2008 | 1997 Chrysler Town & Country

Not finding what you are looking for?
1996 Jeep Grand Cherokee Logo

76 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...