Question about 2006 Nissan Titan
The heater is not working at all. It only blows cold air.
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
I live in Alaska and have had the same problem i just added more coolent to the radiator and it warmed up i installed a block heater and i leaked a bit and the coolent level got low and i would have no heat. I tryed to fill just the coolent resivoir and that dident work so i filled the radiator pumb full and that worked!! Hope this helps.
Posted on Jan 18, 2009
It appears we have an Air lock scenario and you will need to perform a system Bleed.
Park the vehicle on level ground, when cold remove coolant filler cap, start engine and leave to idle, turn heater on full and blower to max. When engine reaches operating temperature watch and listen near coolant filler, keep clear as gurgling and hopefully a boil over should occur. Top up with very warm coolant and wait as it may do it again.
Check for heat inside vehicle if warm replace coolant cap but keep an eye on temperature gauge as the ~Air lock may have moved on from heater matrix/core so proceedure needs to be carried out again from COLD.
Please press the Blue button to appraise my FREE Efforts, Thank You!
Paul 'W' U.K
Posted on Feb 24, 2009
1. Open glove box
2. Unhook elastic retainer on right side
3. Locate the two "stop tabs", one on the upper left and the other on the right side. Push both to the left to clear their stops and the glove box will swing down, allowing access to the filter cover.
Posted on May 06, 2009
Tips for a great answer:
Dec 12, 2012 | Nissan Cars & Trucks
Sep 26, 2012 | 2006 Nissan Titan
Welcome to FIxYa.com
Check the heater control valve and vacuum lines
Make sure nothing fell into dash causing the blend door to not operate correctly
Thank you for using FixYa.com
Regards, Lee Davidian
Nov 07, 2010 | 2007 Nissan Titan LE
Aug 31, 2010 | 2006 Nissan Titan
Mar 21, 2010 | 2007 Nissan Titan LE
Mar 05, 2010 | 2006 Nissan Titan
Dec 11, 2009 | 2006 Nissan Titan
Oct 06, 2009 | 2005 Nissan Titan
Jul 11, 2014 | 2006 Nissan Titan
150 people viewed this question
Usually answered in minutes!