Question about 2006 Mercedes-Benz R-Class
Posted by Anonymous on
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
Here's a link to this great service
Posted on Jan 02, 2017
hello,steering lock mechanism and your key need to replaced,if you want try to remove your under dash,steering lock mechanism have a small pin(around 5 mm) which pit to steering housing,drill out the lock,then try to turn steering wheel,ty
Posted on Apr 16, 2009
hello,good day,seems your starter is not working,if you have a auto. trans. try to back and fort the trans. lever.or try to put in neutral,then try to start,if not, check your solenoid switch (on top of starter motor) if have voltage while you are in starting position,hoping your battery is full charge ,ty
Posted on May 12, 2009
SOURCE: IGNITION AND STEERING LOCKED!
Try pressing the key down little bit while you are trying to turn it towards ignition, at the same time slowly turning the steering wheel clockwise and counter clockwise ( it's locked but it still moves a little bit), it should release the steering wheel lock.
hope it helps
p.s please rate the answer if you found it helpful, i need it for my ratings, thanks!
Posted on Feb 27, 2010
you know that you have to put the car into park before you can pull the key,well.....its controlled by a switch on the gear linkage.
Posted on Aug 21, 2010
Tips for a great answer:
May 06, 2016 | Mercedes-Benz S-Class Cars & Trucks
Feb 03, 2016 | Cars & Trucks
Jun 09, 2015 | Mercedes-Benz E320 Cars & Trucks
Apr 10, 2014 | Mercedes-Benz S-Class Cars & Trucks
Feb 05, 2012 | Mercedes-Benz C240 Cars & Trucks
Nov 09, 2010 | 1998 Mercedes-Benz CLK
Sep 05, 2010 | 2007 Mercedes-Benz R500
Feb 27, 2010 | 1995 Mercedes-Benz C-Class
Apr 18, 2009 | 1999 Mercedes-Benz E-Class
Apr 15, 2009 | 1996 Mercedes-Benz C-Class
199 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: