Question about 1995 Ford Escort

Open Question

Need to know what size bolts are on a ford escort torque converter

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 54 Answers

SOURCE: Escort Mk2 1600 valve and torques settings what are they

cylinder bolt torque settings stage 1 15 ft pounds
stage 2 50 ft pounds
stage 3 85 ft pounds

valve clearences 0.15 - 0.20mm inlet
0.22 - 0.27mm exhaust
these are the figures i have been supplied with, you can also use

cylinder bolts stage 1 10 ft pounds
stage 2 50 ft pounds
stage 3 + 90deg.
with my exp, i would use the first guide as the degree method has a tendancy to snap head bolts, especially on older vehicles.

Posted on May 14, 2009

Ad
  • 29 Answers

SOURCE: cv axle removal from transmission

take a pry bar to the side of the tranny and pry the cv out, there is a clip on the shaft of the axle on the inside of the tranny

Posted on May 15, 2009

centralvalle
  • 386 Answers

SOURCE: 95 ford escort transmission leak

Dont waste your time and money trying to use a transmission stop leak product, they don't work on large leaks, you say the leak is excessive in this case the you must remove the transmission to access and remove the torque converter, after you have removed the torque converter carefully inspect the torque convert imput shaft for wear and also you will need to visually inspect the transmission front pump bushing for wear also, I have seen it all to often people just replace the seal thinking it was just a seal failure, well more times than not there is a reason for seal more than just the age of the seal, excessive wear on trans pump bushing and torque converter imput shaft is usaully the cause, check and repair those as good practice during this repair unless you just like to do the repair over again for free... also check the torque converter run out, sometime when they are repaired they are welded back together somewhat crooked which will cause it to spin off of a true center, this will cause immediate damage to transmission. Check also your engines crankshaft end play for looseness this can cause wobble which will transfer to transmission causing this problem as well... do the repair thouroughly and who ever does it for you have them check all that I listed and you should get a good repair which will last without issues.... please rate my help thanks...

Posted on Aug 08, 2009

BCAS1298
  • 3092 Answers

SOURCE: Head bolt torque specs on 1997 ford escort 2.0

STEP # 1 30 - 44 FT.LBS
STEP # 2 ADDITIONAL 90deg
STEP # 3 ADDITIONAL 90deg

AFTER STEP # 1 LOOSEN BOLTS 1/2 TURN, THEN DO ALL 3 STEPS.

MAKE SURE YOU TIGHTEN IN SEQUENCE.

Posted on Nov 06, 2009

  • 510 Answers

SOURCE: I need the torque specs for the main and rod bolt

engine tightening torques
Main bearings Renew bolts/nuts No
Main bearings Stage 1 43 Nm
Main bearings Stage 2 85 Nm
Big end bearings Renew bolts/nuts Yes
Big end bearings Stage 1 15 Nm
Big end bearings Stage 2 90°

Posted on Jan 21, 2010

Testimonial: "This is the exact info I have been trying to get and is very helpful"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Whats the bolt torque specs on a 1988 ford escort gt?


You didn't specify a particular bolt so your best bet is to get a comprehensive workshop manual. I have linked to an assortment:
ford escort repair manual ebooks for download 81595 results

Jan 04, 2015 | 1988 Ford Escort EXP

1 Answer

Anyone know the torque specs and sequence for a 97 ford escort 2.0 for the cylinder head?


Hi.

The specs below are for the 2.0 L SOHC engine mounted on P VIN Ford Escort.

The bolts must be tightened 30-44 ft. lbs. follows the procedure.

  1. Tighten the bolts in sequence to 30-44 ft. lbs. (40-60 Nm).
  2. Back bolts off 1 / 2 turn.
  3. Retighten bolts to 30-44 ft. lbs. (40-60 Nm).
  4. Rotate all bolts in sequence by additional 180°, in two steps of 90°.
Specs from AutoZone.

Regards,

Ginko

Sep 13, 2011 | 1997 Ford Escort

1 Answer

Need torque specs for 1994 ford escort 1.9 ltr head bolts


Torque new cylinder head bolts in sequence to 44 ft lb. Loosen bolts approximately two turns, then torque bolts in sequence to 44 ft lb. Turn bolts an additional 90 degrees in sequence, then an additional 90 degrees

Torque sequence
9 3 1 5 7
8 6 2 4 10

May 07, 2010 | 1994 Ford Escort

1 Answer

I need the engine timing and the crank pulley torque specs.


Once you align the top and bottom timing marks, and install the belt and tight the belt tensioner, you are done, there is no distributor to adjust ignition timing, it is computer controlled. The torque for the crankshaft bolt is 80 foot pounds. Hope this helps, let me know.

Mar 07, 2010 | 1995 Ford Escort

2 Answers

Head bolt torque spec


Always use new head bolts.
1)tighten to 40ft/lbs
2)back off 1/2 turn
3)tighten back to 40ft/lbs
4)tighten an additional 90 degrees
5)tighten an additional 90 degrees.

Aug 16, 2009 | 1999 Ford Escort

2 Answers

Torque settings for a 1989 ford escort, 1.9L


The answer is tighten the bolts to 17-22 ft lb

Mar 17, 2009 | 1989 Ford Escort

2 Answers

Head gasketrepair


These are torque to yeild bolts, must be replacedd new bolts will have specs.

Jan 02, 2009 | 1986 Ford Escort 4-Door

1 Answer

Tourque converter


The torque converter is a good sized round object bolted to the flywheel inside the bell housing.

Oct 11, 2008 | 1997 Ford F150 Regular Cab

Not finding what you are looking for?
1995 Ford Escort Logo

Related Topics:

43 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76848 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

fordexpert

Level 3 Expert

5546 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...