Question about 1999 Isuzu Rodeo

1 Answer

99 Rodeo Right turn signal makes brake lights blink

Ok i have a 99 isuzu rodeo. just recently when you turn on the right blinker, it makes both rear tail ights/brake lights blink. and also makes the shifter click, safety switch activating going in time with blinker. so somehow its back feeding into the brake system. the turn signals are independant of the tail/stop lights on the rodeo. left blinker works fine. i have changed the flasher module, every single light bulb in the system front and rear. and still cannot find the problem. wiring all seems to be fine looks new still. i am at wits end. i mean the emergency flashers are on the dashboard, not the column. turn signals are not part of the brake lights. so how is this feeding power inot the brake lights? any help or suggestions greatly appreciated.

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

TURN SIGNALS WILL FEED BACK THROUGH THE TURN SIGNAL SWITCH.THEY ARE INDEPENDENT OUT SIDE ON THE CAR BUT NOT IN THE SIGNAL SWITCH.REPLACE THE SIGNAL SWITCH

Posted on Jan 03, 2009

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya Mechanic can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repair professionals here in the US.
click here to Talk to a Mechanic (only for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

99 isuzu rodeo wont shift from park while running and the cruise control refused to release when i touched the brake. Is it a brake switch issue?


It sounds like the neutral safety switch is bad need more info year make model yes it could be a brake switch or cruise controller switch or controller.Find a good mechanic because these are serious issues. Good Luck

Sep 06, 2017 | 1999 Isuzu Rodeo

1 Answer

My name is Dave, any help would be much appreciated! When I turn on the left or right directional indicator from the lever on the steering column it makes a rapid blinking on the control panel, the front...


Hi, I have a couple of questions.
1. were the signals working before you replaced the brake light bulbs, and did you use the recommended bulbs?
2. Do the brake lights work now?

The brakes and signals use the same filaments, so these things are tied together.

Jul 31, 2011 | Volvo 240 Cars & Trucks

2 Answers

I have 2000 isuzu rodeo lse replace brake pads and


CHECK SENSOR ON THE PADS, OR BRAKE SIDE

Jul 24, 2010 | 2000 Isuzu Rodeo

1 Answer

Both Blinkers Blink when try to turn???


You have one of three problems :Condisation, weak ground or a frad wire in you collam

Jun 01, 2009 | 1998 Isuzu Rodeo

2 Answers

My 93 Isuzu rodeo check trans light keeps coming on and then the transmission starts to lock up (wont go) then i have to cut the car off and then it runs fine recently now my left turning signal is not...


There is a four way plug on transmission ,unplug it. The over drive in that model is actually a lock up converter.The converter is bad.
check your turn signal flasher and replace all bulbs turn signal bulbs.

Dec 07, 2017 | 1997 Isuzu Rodeo

3 Answers

99 Rodeo Right turn signal makes brake lights blink


could be both unrelated issues at the same time

worn indicator stalk
faulty relays

adjust or test the brake pedal stop light switch

Mar 22, 2017 | 1998 Isuzu Amigo

1 Answer

Want to get it right the first time..


try checking the fluid level in the gearbox,rodeo dont have a dipstick so u have to undo the plug on the side of the gearbox just like a manual gearbox.if the oil is really low i suggest doing a full service on the gearbox,change the oil and filter is ideal for better results.

Jun 16, 2008 | 2001 Isuzu Rodeo

Not finding what you are looking for?
1999 Isuzu Rodeo Logo

948 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

77499 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22306 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14398 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...