Question about 2000 Ford Windstar

1 Answer

P0136 ford windstar 2000

P0136 ck engine light

Posted by on

Ad

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

    Greenhorn:

    A rookie expert who has answered 20 questions on their first day.

  • Expert
  • 59 Answers

P0136 is an oxygen sensor check code for sensor 2 in bank 1. This can indicate a faulty sensor, but more commonly it indicates an issue with the exhaust. There may be a leak somewhere near the sensor causing an erroneous report to the engine computer for fuel to air ratio in the exhaust. This can be difficult to detect. At a garage, they will probably use a smoke machine to detect airflow around exhaust gaskets to spot a leak, barring that, they will replace the sensor. If the light still comes on after confirmation there are no leaks and the sensor has been replaced, it would indicate a problem in the wiring on the line between the sensor and the engine computer.

Further reading about the code can be found here:
http://www.obd-codes.com/p0136

Posted on Oct 25, 2012

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
emissionwiz
  • 76649 Answers

SOURCE: 2000 Windstar rebuilt engine won't crank theft light comes on

Refer to the owners manual for dis-arming procedure for the anti-theft, if you do not have the owners manual here is a link to Ford for a free PDF file of the owners manual.

http://www.motorcraftservice.com/pubs/content/~WOYWIN/~MUS~LEN/41/00winog1e.pdf

Posted on Oct 13, 2008

maklean
  • 1665 Answers

SOURCE: Ford Windstar oil leak

Most possible oil leaks from valve cover rubber oil seal. Remove valve cover, inspect , clean surfaces, and replace with new rubber oil seal .
Good luck!
Thanks for using fixya.

Posted on Oct 19, 2008

MrScary66613
  • 1990 Answers

SOURCE: 2000 ford windstar van belt diagram!!

There should Be a Factory Sticker under the Hood that gives you the Exact Routing. Check in the Back of the Owners Manual. If not let me Know!

Posted on Jan 03, 2009

chuck943
  • 783 Answers

SOURCE: 2000 ford windstar anti theft light flashing vehicle won't start

This means that your key is not being recogonized.Ethier the chip in the key is bad or the patts transciever at the lock cylinder. Do you have a spare key? If not you will have to get 2 new keyss cut and programmed.

Posted on Feb 16, 2009

  • 24 Answers

SOURCE: 2000 ford windstar airbag light flahes then stays on

You should take the vehicle to a certified dealer immediately; Your airbag could deploy prematurely causing serious injury or death!

Posted on Mar 31, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Po136 in a 96 windstar 3.8l


Hello,
The P0136 code is set when the Engine Control Module (ECM) detects that the rear O2 sensor signal voltage is out of range for an extended period of time. bank 1 is the side of motor near the firewall that's where the #1 plug is. Replace the sensor and you'll be ok..

Read more: http://engine-codes.com/p0136_ford.html#ixzz3BWdVxpCC

Jun 09, 2014 | 1996 Ford Windstar

1 Answer

Repair front directionals, hazards and high and low beams 2000 ford windstar


You probably have lost your ground. Check ground straps going from firewall to engine block. Then follow through and verify at the lights and look for exposed or corroded wires.

Jan 15, 2014 | 2000 Ford Windstar

1 Answer

P0301 and P0303 code with flashing CK Engine light


Go to : http://www.obd-codes.com/p0301
Let me know if this helps.
Terry

Jan 23, 2012 | 2001 Ford Windstar

1 Answer

My engine light is on and i took it to get a code but the the reader could not connect so i could not get a code. What would keep it from reading?


Ck the fuse for the power point (cig lighter). This is also tied into something called the DLC (data link connector), which is what the scanner plugs into to pull the code.

May 02, 2011 | 2000 Ford Windstar

1 Answer

2000 Ford Windstar is running too lean how do


The check engine light should be on--rent a scanner, read any code(s), and pursue to repair(s). The O2 sensor has direct control over fuel/air ratio. The other sensors in the air intake system modify these settings for peak performance under varying conditions.

Oct 18, 2009 | 2000 Ford Windstar

1 Answer

2000 ford windstar anti theft light flashing vehicle won't start


This means that your key is not being recogonized.Ethier the chip in the key is bad or the patts transciever at the lock cylinder. Do you have a spare key? If not you will have to get 2 new keyss cut and programmed.

Feb 15, 2009 | 2000 Ford Windstar

2 Answers

2000 ford windstar stalling when too much power being used


o2 cencers will cause stalling if your engine light is on get it scanned it will tell you if it needs to be changed

Oct 20, 2008 | 2000 Ford Windstar

1 Answer

2000 Windstar rebuilt engine won't crank theft light comes on


Refer to the owners manual for dis-arming procedure for the anti-theft, if you do not have the owners manual here is a link to Ford for a free PDF file of the owners manual.

http://www.motorcraftservice.com/pubs/content/~WOYWIN/~MUS~LEN/41/00winog1e.pdf

Sep 10, 2008 | 2000 Ford Windstar

Not finding what you are looking for?
2000 Ford Windstar Logo

814 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76649 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...