Question about 1987 Isuzu Trooper
Posted by Anonymous on
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
remove front wheel ,look at back of caliper and and look for teh two retaining bolts that hold the caliper to the support bracket.if not sure take it to a garage as any mistake could kill someone
Posted on Nov 15, 2008
Sounds like it is your hub bearings. Jack the car up and check for play in the hub bearings. More than likely this is your issue and the bearings need to be replaced. Hope this helps. Thanks for an honest rating.
Posted on May 19, 2009
If you hear a click when the ignition is turned but no start its a high possibility that its the starter or the wiring going to and from the starter. Hope this helps! ~Derek~
Posted on Jun 20, 2009
Go to my profile I have just explained how to change a cv boot on a Trooper. The axle needs to be taken out to change the boot so the same solution. What you call an axle I have refered to as a drive (short for driveshaft) It takes a lot of explaining so save me a lot of writing if you read the solution I gave for changing the CV boot. Cheer's
Posted on Sep 28, 2009
Tips for a great answer:
Dec 10, 2013 | 1998 Isuzu Trooper
Jun 25, 2017 | 1991 Isuzu Trooper
Jun 19, 2010 | 1990 Isuzu Trooper
Jun 12, 2010 | 2000 Isuzu Trooper
Apr 03, 2010 | 1996 Isuzu Trooper
Mar 19, 2010 | 1997 Isuzu Trooper
Jun 20, 2009 | 2000 Isuzu Trooper
Nov 17, 2008 | 1996 Isuzu Trooper
Jul 23, 2008 | 1996 Isuzu Trooper
37 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: