Question about 2003 GMC Sierra

1 Answer

Emergency break light and "ding" while driving

The emergency break light is on and making the noise while the truck is driving and the break is not on. Sounds like the "ding" is coming from the door speakers. Its a manual so i use the break always, and it is fairly new and working just fine.

Posted by on

  • scott May 11, 2010

    check brake fluid level

×

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Check the cable you can adjust it under the dash were it conects to the parking brake pedal

Posted on Jan 18, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Why is emergency brake light on with continuous "dinging"?


The emergency brake switch is most likely the cause of your problem. It is on the side of the brake pedal. Some you can adjust the position to where it shows the emergency brake pedal is not depressed. Here is an image of the switch..Hope that solves your problem

25872885-lssthgpi25gedqz0c32oowfn-2-0.png

Sep 19, 2015 | 2003 GMC Envoy

2 Answers

2003 gmc envoy emergency brake light is on and there's a ding ding ding ding nouse. checked brake fluid. How do I stop the Noise or fix it


the noise is telling you the emergency brake is on (or it thinks it is) emergency brakes don't use any fluids as they are totally mechanical on your truck , id first try setting the brake and then releasing it again , if this still doesn't clear the light on then id have your mechanic look at it , might require an adjustment

id be cautious in driving it if theres any possibility that brake is dragging as this will severely overheat your brakes requiring you to replace them early

Sep 17, 2015 | GMC Cars & Trucks

1 Answer

Turn off the ding ding noise on a 2003 bonneville SSEI? The emergency brake has been disabled but the ding noise will not go away


Wait, you are driving a car with the E brake disabled? Perhaps you should remedy this very dangerous act and fix the ding at the same time.

Feb 12, 2015 | 2003 Pontiac Bonneville

1 Answer

Emergency break ding sounds every time i start driving


The brake shoe may need to be adjusted. if you pulled the emergency handle and it did not fully disengage when you released it, you can still drive, but it will drag enough to cause the alert. .

Dec 09, 2013 | 1999 Chevrolet Malibu

1 Answer

'02 pontiac aztek and the break light on the dash is on and the warning dinging noise wont stop


This light also indicates other brake system problems. You can also have a park brake switch that is stuck on or damaged in some wayy, check that first.

Sep 04, 2012 | 2002 Pontiac Aztek

1 Answer

Brake light flashing on dash, headlights not working without manually turning on and then there is this dinging sound. When I brake the sound completly stops. When I begin to drive again, the noise starts...


sounds like emergency brake is on or the switch is broken try releasing it and see if you maybe hit it if not apply it and release it and see if that fixes your issue good luck

Dec 15, 2010 | 2000 GMC Yukon XL

1 Answer

Emergency brake light comes on & dings when right hand turns only


First have the vehicle's braking system inspected for internal and external leaks ASAP. I don't doubt that fluid level is probably low, but topping it off is not the answer. If no leaks were found then wiring to hand/foot emergency is loose and grounding out.

May 20, 2010 | 2003 Kia Sedona

1 Answer

Emergency break pedal stuck to floor, but break is disengaged


sounds like your brake cable has broken or there is something damaged in the pedal assembly.........try pulling on the release handle and move the e-brake pedal back to its off position by hand at the same time.(you may have to tie it in this position to keep it up)If that doesnt work there is a sensor on the pedal assembly that you should be able to bypass by either disconecting the wire(1 wire system) or connecting the two wires together (2 wire system)Especially if your truck is a standard the e-brake is an important safety feature,so if these steps fix the light and dinging problem you should still take the steps to have it repaired.
hope this helps.........Good Luck!

Dec 09, 2008 | 1999 Chevrolet Silverado 1500

Not finding what you are looking for?
2003 GMC Sierra Logo

320 people viewed this question

Ask a Question

Usually answered in minutes!

Top GMC Experts

yadayada
yadayada

Level 3 Expert

70374 Answers

Freddy

Level 3 Expert

1311 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...