4 cyl. 2004 sedan. need to know which 02 sensor.
P0141 indicates oxygen sensor 2 in bank 1. Bank 1 is on the side of the engine where the first cylinder is.
Your firing order (and the location of your cylinders) can be found here:
http://autorepair.about.com/library/firing_orders/bl-fo-0286.htm
And further reading on the code you pulled can be found here:
http://www.obd-codes.com/p0141
SOURCE: looking for o2 sensor on 02 accord
Yes this will work if it says direct fit oe replacement and not universal. The universal replacements never work because you have to cut the plug off of your and wire it on the new one. The Engine code is the 8th character of the vin. You can also look under the hood on the engine label and get the code there.
SOURCE: need to replace 02 sensor bank1 sensor 2
Bank 1 is the O2 sensor on the exhaust manifold just about where the exhaust pipe connects to the exhaust manifold.
SOURCE: I have 1997 honda accord 4 cyl vtec..I need to
It's a couple of 10mm bolts on top of the transmission. You might need to remove the air cleaner intake tube, etc to see it. It will have wires and a plug on it. Google a pic of the 97 Accord VSS to get an idea of what it looks like. eBay is the cheapest way to go in replacing it. Parts stores are over priced on this.
SOURCE: where is the CYP Sensor A located in the 1997
YOUR CRANKSHAFT POSITION SENSOR TOP DEAD CENTER AND CYLINDER POSITION SENSORS IS THREE SEPERATE SENSORS BUILT IN THE DISTRIBUTOR.
449 views
Usually answered in minutes!
How did you determine that the oxygen sensor needed to be replaced? Also, do you have access to an OBD2 code scanner?
The scanner showed P0141. On calling two mechanics to get it fixed, they both said that was an 02 sensor but needed to know which one ??????
That solves the mystery. Many thanks everyone.
×