Question about 2004 Chevrolet Silverado 1500 Crew Cab

Open Question


Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

A 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
The service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Good luck!

Posted on Jan 02, 2017

  • 2035 Answers

SOURCE: need schematic for location of ECM on 2002 Chev Silverado 5.3L GAS ENGINE

Please use this link :

Good luck...

Posted on Aug 14, 2008

  • 54 Answers

SOURCE: how do I replace the wiper pulse module on a 94

open hood and go to the wiper motor remove electricle plug and plastic cover you will see a circuit board i believe you will be able to get it from there if not holler at me

Posted on Mar 19, 2009

  • 166 Answers

SOURCE: where exactly is the wiper control module

palse board is in the wiper moter . some you can change just the board some you need to replace the motor

Posted on Jun 12, 2009

  • 574 Answers

SOURCE: 2003 Chev. Silverado 4X4 Z71. A/C is making a loud clicking noise

is the air coming out of the vents cold?

Posted on Aug 26, 2009

  • 79094 Answers

SOURCE: Where is the location of the wiper motor pulse

it is part of the wiper motor.

Posted on Feb 06, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

How to located and replace pulse module on winshield wiper

its part of the wiper motor under the plastic cowl bottom of windshield outside the car

Mar 05, 2015 | 2000 Chevrolet Silverado

1 Answer

02 silverado. wipers only work on high. No delay speed and no low speed. Will not park

Replace the wiper module. Cardone at around $35-$50. This is the black cover under the hood, driver's side with 3 screws and about 4" x 4". Takes about 3 minutes to change.
A1 Cardone 81158PB Remanufactured Wiper Motor Pulse Board Module

May 19, 2011 | 2002 Chevrolet Silverado 1500

1 Answer

Wipers want turn off on my 2003 truck


Nov 25, 2010 | 2004 Chevrolet Silverado 1500 Crew Cab

1 Answer

Delay wipers only work on high speed on 2000 chevy silverdo 1500 truck no delay

Hello, my name is Ben and I can help you with this problem. This is a very common problem with Chevy. You need what is known in most vehicles as a "pulse board". The pulse board is located inside the wiper motor control module. On many vehicles the pulse board is replaceable, unfortunately on your Silverado you must replace the entire Wiper Motor Control Module which is bolted onto the top of the wiper motor. To get to the wiper motor, first remove those little nut covers on the big end of the windshield wiper arms, if you slip a small screwdriver or your fingernail they just pop off. Now unbolt the windsheild wiper arms, before removing the wiper arms, mark their location on the windsheild with a grease pencil or magic marker. The arms are hard to remove, you need to kinda wiggle and pull at the same time, now that long plastic cowl needs to come off, those clips at the front edge just slide forward, then at each end lift up that rubber flap and remove those TORX screws. Remove the cowl and set it somewhere SAFE, it's easy to break. You will now see the control module mounted on the wiper motor, unplug the electrical connections and remove the TORX screws holding it to the motor. Assembly is the reverse of dis-assembly. If you have any trouble or questions, feel free to ask, Ben.

Nov 13, 2010 | 2000 Chevrolet Silverado

1 Answer

Windshield wipers will not shut off

Hello, my name is Ben. This is a very common problem for GM. You have a wiper motor control module and it is most likely defective. The module is bolted directly onto the wiper motor which is mounted to the firewall under that long plastic cowl just in front of the bottom edge of your windshield.

Jun 08, 2010 | 2003 Chevrolet Silverado 2500HD

3 Answers

Can not get windshield wipers to turn off on 2003 Silverado 1500. They will turn on high speed when switch is moved but will not quit working in off position.

You have a bad wiper module.Just go under the hood and remove the connector at the wiper motor and remove the cover.You need a 20 torx bit.Pry the module out and replace it per the instructions in the new module box.You can get this part at the dealership.You will need to add sealer to the edges of the cover to keep water out.Hope this helps.Good luck.

Mar 23, 2010 | 2003 Chevrolet Silverado 1500

1 Answer

Where exactly is the wiper control module on a chevy silverado 2003

palse board is in the wiper moter . some you can change just the board some you need to replace the motor

Jun 11, 2009 | 2003 Chevrolet Silverado 1500

10 Answers

Windshield wipers will not turn off - 2003 Chevrolet Silverado

Fixed the wiper problem which was identical to Brad's by changing out the wiper module which is also called a pulse module or something of that nature. Pretty easy fix. You have to remove the grill that the wiper blades protrudes from in order to get to the motor (4 clips in front which can be removed by hand, remove radio antenna, a center push down retainer, two plastic end caps which pop off and then 1 star type screw on each end under the end caps). Getting the blades off seemed difficult. I used a small puller to pop them off after removing the nuts.

You can't buy this module at a regular parts store. I had to get it from the dealer so be prepared to spend $130 to $140 for the part or go to the salvage yard. Works great now.

Mar 14, 2009 | 2003 Chevrolet Silverado 1500

1 Answer

1988 Chev c1500 wiper motor pulse board

well if you replace the whole wiper motor and get the lifetime warranty you wont have to worry about it anymore because if it goes out again you just get another motor sure its a little more hard work then a pulse module but you don't have to worry that the motor will go out. just a recommendation.

Jun 13, 2008 | 1988 Chevrolet K1500

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

99 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts


Level 3 Expert

79077 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides