Question about Infiniti Cars & Trucks

Open Question

Where's bank 2 Sensor 2 for 1998 Infinti q45 - Infiniti Cars & Trucks

Posted by Anonymous on


6 Suggested Answers

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi there,
Save hours of searching online or wasting money on unnecessary repairs by talking to a 6YA Expert who can help you resolve this issue over the phone in a minute or two.

Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.

Here's a link to this great service

Good luck!

Posted on Jan 02, 2017

  • 674 Answers


pore quality fuel will also set that code. dont get into too big of a rush to replace it . run a couple tanks of good gas first but here is a diagram that might help you out

Posted on Sep 16, 2008

  • 24 Answers

SOURCE: i have error codes p0156 p0161

  Check the wire harness near the top of the engine in the rear. They were good for rubbing through on the trans fill tube bracket. Judging by the code you have 4 sensors. you would be interested in the drivers side rear sensor.

Posted on Nov 13, 2008

  • 80520 Answers

SOURCE: I get a DTC P0133 code on my 1998 Ford Explorer V8

it may be a defective O2 sensor here is th difinition:
P0133 - Heated Oxygen Sensor (HO2S) Slow Response Bank 1 Sensor 1 , this is the sensor on the side of the engine that #1 cylinder is on, it is the sensor before the cat.

Posted on Jan 14, 2009

  • 362 Answers

SOURCE: o2 sensor bank 2 sensor 2

Bank 2 will the the passenger side or right side and sensor 2 is the O2 sensor behind the catalytic converter.

Posted on Jan 28, 2009

  • 158 Answers

SOURCE: Lexus 1998 (124K miles) has error P1350 VVT sensor on bank 2

code is VVT sensor circuit malfunction (bank 2)
here is link to code site

Posted on Feb 10, 2010

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

2 Answers

Where is the camshaft sensor located on a 2002 infiniti q45 bank 1

This picture here showing the engine from the rear.

Jul 09, 2016 | 2002 Infiniti Q45

2 Answers

Need to locate oxygen sensor 1998 camry v6

follow your exhaust system you should see them in the pipe you have 1 up near manifold or in the manifold and the other after the catalic converter 4 cycl have 2 6 cycl have 4 also you have up stream bank 1 sensor 1 bank 2 sensor 2 bank 1 sensor 2 bank 2 sensor 1 and downstream as well so some models before cat converter and after

Jul 04, 2014 | 1999 Toyota Camry

1 Answer

Are both knock sensors on a 1999 Infiniti Q45 the same (part)

Search knock sensor on youtube the one thats under the intake plenum can be relocated save yourself the 800 Dollars.

Feb 06, 2013 | 1999 Infiniti.5 QX4

2 Answers

2002 Q45 infiniti Cranks but won't start

I am having the same issue on my 2002 Q45, most people that have had this problem have replaced the Starter Solenoid - You dont need to replace the whole starter, unless you have alot of miles. I ordered the part and I am going to try and install it this weekend. Almost everyone with this problem said that after replacing the solenoid the problem went away. Either do it yourself or have an independent mechanic do this, the dealer wants $900 for replacing the starter parts and labor. Solenoid is about 92 bucks online OEM.

Jun 02, 2012 | 2004 Infiniti Q45

1 Answer

Where is O2 sensor bank (sensor 3) located on the engine? Maube a picture? dave g

Bank 1 is the side that has Cylinder # 1 (drivers side on your engine) Sensor 1 is the one BEFORE the cat. Sensor #2 is AFTER the cat. Bank 2 is the side that has Cylinder #2 (passsenger side on your engine) and again sensor #1 is BEFORE and sensor #2 is AFTER. I have seen dodge use a 5th one on the V10 after the two exhaust pipes are joined together. that's the only place a #3 sensor could be that I know of. I don't know if they did this on the 5.2 V8.

Jun 24, 2011 | 1998 Dodge Dakota

1 Answer

Need to know what bank one is i was told that it is an o2cinsor but which one

facing the front of the engine, bank 1 will be on your left. there is a o2 sensor in each exhaust manifold before the catalytic coverter and one after. sensors are identified; bank 1 sensor 1, bank 2 sensor 1, or bank 2 sensor 2. the code that is set should indicate which bank 1 sensor to replace.

Apr 12, 2010 | 1998 Ford Taurus

1 Answer

O2 sensors on 1998 ford windstar

1998 Ford Truck Windstar 3.8L SFI 6cyl, there are 4 oxygen sensors on the Windstars They are divided into 2 banks of 2. Bank 1 is the for the rear 3 cylinders of the engine - Bank 2 is for the front 3 cylinders. Bank 1 / Sensor 1 (upstream) is located just below, in the pipe, the exhaust manifold on the back of the engine.

REMOVE TIP: you may have to bend part of the transmission heat shield out of the way - be sure to put it back when done.
Bank 1 Sensor 2 (downstream) is located just past the drivers side catalytic converter.
Bank 2 Sensor 1 (upstream) is located just below the exhaust manifold, in the pipe, at the front of the van - access is from the top.
Bank 2 Sensor 2 (downstream) sensor is located just past the passenger side catalytic converter.

NOTES: * Use lots of penetrating oil - allow to soak - to make removal easier and avoid damaging the exhaust pipe

Hope this help; TY for using Fixya (remember rated and comment this).

Mar 30, 2010 | 1998 Ford Windstar

1 Answer

Where is bank 2 senser 1on 1998 ford windstar with 3.0 engin

bank 2 sensor 1 is oxygen sensor upstream before catalytic converter.

Mar 30, 2010 | 1998 Ford Windstar

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

81 people viewed this question

Ask a Question

Usually answered in minutes!

Top Infiniti Experts


Level 3 Expert

80417 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22326 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14417 Answers

Are you an Infiniti Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides