- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
? 24:15 https://www.youtube.com/watch?v=Jo76ylqgUR8
Dec 22, 2012 - Uploaded by Skizzot7
This is how to fix intermittent ABS and Brake dash lights on all Chevrolet ... That board is rather robust and is installed external to the vehicle in a location that sits .... I took the module out of a2002 Sierra and it is engineered with no T10 .... ABS Sensor and Harness 2000-06 Chevy Suburban Tahoe GMC ...
Because the problem is not with pads and/or calipers. If the lights come on only when you brake, you may have a light bulb out. If they come on when you start the car and they stay on, you have a problem with your ABS system (anti-lock braking system). The systems self-check when you start the car, so the light should come on and then go out. If it comes on and stays on, the ABS system has failed. You need to have the vehicle serviced to repair the ABS system.
Well, it could mean that the emergency brake has not been fully released.The ABS system light is on if something has occurred within the ABS system. Something faulty may have happened there, get it checked out!
This means...something needs to be attended to in your braking system! I'm sorry to be harsh, but the light comes on.....FOR A REASON! Have your brakes looked at, by a professional ASAP!....before you have a life changing accident.
When you start to loose your abs sensors(more than one)the brake light will come on.with one sensor going the abs light will come on.I would have your front wheel bearings check seen as how that is were the sensors are.If a weeering sound happens while driving and increases and decreases with with speed I would definatly suspect wheel bearings.
I just spent a bundle on this, the ABS/brake light is the ABS control module dealer says the module alone in1K plus just for the module , the 4WD not working is a 4WD sensor in the dash sucking me dry for another 200.00 bucks, Good luck and hope this helps.
I hope you have the problem fixed by now, but, it is the ABS control under the truck. You need to go under the hood and open the fuse box and disconnect the 60 amp fuse for the ABS, this will turn it off before it burns up. This however will also cause the traction assist off light to stay lit all the time. To the fix the problem you can pay tons of money ($700 or so) to have the dealership install a ABS control and the problem will happen again over time. Or, remove it yourself, go on ebay and ship it off to a guy who repairs them for about $150 and you will never have the problem again. Also, if you wrap your cable ends with plastic and protect them good, you can still drive you truck while the part is being worked on. It takes about a week.