Question about 2001 Ford Focus

1 Answer

Brake light won't work

Posted by on

Ad

1 Answer

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

Check your Fuse holder for the brake light fuse. Its likely it[the fuse] blew.

Its usually a 15AMP fuse, as for the literal location of the fuse box check any of the following places: Under your glove compartment(by the footwell) or the drivers side footwell... .or under the hood.

This is a good fuse:
http://www.societyofrobots.com/images/electronics_fuse_not_blown.jpg

This is a bad fuse:
http://www.societyofrobots.com/images/electronics_fuse_blown.jpg

Posted on Oct 24, 2012

Ad

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

2 Answers

Brake lights won't work


Check the voltage or the connection.
__________
Multi-Cardiag M8 CDP for car and truck

Jun 05, 2013 | Cars & Trucks

1 Answer

2000 Chrysler Town & Country Tail lights and dash lights won't work


If the brake lights and turn signal lights work, then there may be a bad fuse. Check the fuse box.

Mar 21, 2013 | Chrysler Town and Country Cars & Trucks

1 Answer

2001 jeep wrangler. Brake lights won't work but


Check the brake control switch situated just above the break pedal arm under the dashboard. Could be a wire loose or unplugged or the switch itself could be faulty

Mar 07, 2013 | Cars & Trucks

1 Answer

Warnimg brake light


What does the owners manual say the light is for ?

It won't go off until you diagnose & resolve or
repair why it is on.

When you ask a question we need lots of detail

We can't answer every question when a light comes
on & you don't provide a vehicle,engine & all the details
in the manual about the light & the vehicles driveability issues

Nov 15, 2012 | 2007 Toyota Matrix XR

1 Answer

Unable to take out of park position


Do the brake light work? No brake lights and it won't shift out of park. Check your fuses and check for loose wires. Check your brake light switch. If that has failed, you won't be able to get out of park. The other one if the shift lock solenoid which is in the shifter assembly. The brake shift interlock switch prevents the car being shifted from park unless the brake pedal is depressed. Try to apply power/ground to the proper wires & see if it will activate.. If it does, then the problem is between the brake light switch & that solenoid. Could be the wires or the switch.Make sure the shifter cable is still held down in place at the shifter assembly & under the hood. It is the interlock switch that you hear/feel clicking.It is for the prior generation but may still apply.

Good Luck and hopefully you soon will be on the road again...;-)

porsche parts

May 27, 2012 | 1995 Ford Aerostar

1 Answer

Brake light dodge neon 2002


Check the brake fuse in your dash's fusebox. Since the turns work, you know the bulbs are good, unless your Neon has separate brake lights. If the fuse is good, bulbs are good, then check for power at the brake light switch on the upper portion of the brake pedal. Should have 12 volts there all the time. Use a testlight or voltmeter to check. Good luck.

Nov 19, 2011 | 2002 Dodge Neon

1 Answer

I replaced a cracked rear tail light with an after market new light. Now the brake light won't work but reverse lights and directional signal do. The bulbs are fine as I've moved them around and...



  • If there are no brake lights period the check the stop switch (brake light switch)
  • This is attached to the upper part of the brake pedal itself. Should be a little wire off of it. When that goes bad the brake lights will not work at all.
  • Please note that the fuse for "brakes" is ABS only and has no bearing on the brake lights themselves working.
Regards, Tony

May 30, 2011 | 2003 Jeep Grand Cherokee

2 Answers

92 cutlass supreme brake lights stay on when car is off


the problem could be the brake light switch has come loose, it is located somewhere near the brake pedal & needs to be readjusted & secured.......hope this helps.....cheers

Jul 17, 2010 | 1992 Oldsmobile Cutlass Supreme

Not finding what you are looking for?
2001 Ford Focus Logo

190 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

76673 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

fordexpert

Level 3 Expert

5537 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...