Question about 2007 Chrysler Sebring 2.4
The plastick around thermostat is cracked need to replace just dont know part name
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Posted on Jan 02, 2017
Behind the headlight you should see a eletrical wires running to the headlight section. There will be a 2 inch round plastic ring. You grap the back of the bulb and turn it to the right which will release the bulb and the socket. You pull out the bulb and replace it the same way. If this doesnt help then get back to me.
Posted on Feb 06, 2009
you need to loosen the clamp on the throttle body and unplug the map sensor then there are two clips on the other end pull that out and you should be able to pull the filter out you don't need to take the box off.
Posted on Apr 28, 2009
I do not believe that the balljoint is causing the squeak. Take your car to an independent mechanic that you trust. dealerships are notorius for mis-diagnosing (it begins with the intake person describing the problem wrong).
More than likely, the squeak is coming from a worn rubber bushing or mount. Check the exhast pipe hangers for worn rubber. Also check the anti-sway bar bushings and the motor mounts. You should be able to replace these with ordinary tools (assuming you have safe access to the botom of the car - i.e. jack stands). Also check the control arm bushings (these would require an expert, or a pro to replace).
If the balljoint boot is cracked, you can prolong the ball joint life by keeping it well greased. If grease is oozing out the crack, then the balljoint is protected. Replacing the balljoint boot requires separating the wheel spindle from the control arm and can be very dangerous because of the strut spring. This should be left to the expert, or professional mechanic. Also, if the ball joint is squeaking, it needs to be replaced.
If you still want to tackle this yourself, buy a Chilton or similar book (under $10) specifically for your car. They have good instructions and diagrams.
Posted on Jun 29, 2009
Go to; daycoproducts.com, click cars and trucks, then go to serpentine belt. Then on the right side of the screen click on finding your vehicle. Then get the illistration number and click on illistrations, go to that number it should something 6-? or 7-?. It's a pretty good websight.
Posted on Jan 31, 2010
Tips for a great answer:
Apr 01, 2015 | Chrysler Sebring Cars & Trucks
Mar 26, 2015 | 2007 Chrysler Sebring 2.7
Sep 08, 2011 | 2006 Chrysler Sebring
Jun 16, 2011 | 2007 Chrysler Sebring Sedan
Sep 15, 2010 | 2001 Chrysler Sebring
Jul 16, 2010 | 2007 Chrysler Sebring Sedan
Sep 11, 2009 | 2007 Chrysler Sebring Sedan
Apr 10, 2009 | 2004 Chrysler Sebring
203 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: