Question about 2010 Audi Q5

1 Answer

I have audi Q5 2010 model i have a fault code to the transmission i dont know what is this P1f68

I have problem with my transmission audi Q5 2010 model i found a fault code P1f68 unknown code can you help me what is this.

Posted by on

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.

  • Master
  • 550 Answers

HI,
Strongly suggest taking to the dealer as it should still be under warranty.

Code info I googled:

OBD II Fault Code P1F68 :Description of OBD II Fault code P1F68

TH2TNK Sensor Value Offset Shifting
Possible failuer of OBD II Fault code P1F68

  • Hydrogen Tank Internal Temperature Sensor (TH2TNK) offset shifting
  • Inlet Air Temperature Sensor (TA) offset shifting
  • Offset shifting of both Teperature Sensor (TH2TNK) and Inlet Air Temperature Sensor (TA) in Hydrogen Tank
  • RTC function error (Miscalculated Soak Time)
  • FSVSCM failure
  • FCCM failure
Diagnostic Procedure using AutoHex auto Scan tool tester
  • The rear average wheel speed > 15km/h and vehicle speed on the meter<1km/h
  • If the rear average wheel speed > 15km/h and VSP<1km/h lasts for 0.3 seconds, the malfunction is determined.
Test Conditions using AutoHex Scan tool tester
  • Vehicle speed / wheel speed is normal
  • Brake is out of action
  • The automatic brake is out of action
Clear Fault codes Conditions
  • The rear average wheel speed > 15km/h and vehicle speed on the meter<1km/h
  • If the rear average wheel speed > 15km/h and VSP<1km/h lasts for 0.3 seconds, the malfunction is determined.
MIL Status
  • Glow ON


Note:
  • AutoHex is a professional OBD /OBD II diagnostic scanner / scan tool tester.
  • This fault code is a GERENRIC fault code, some cars may change the meaning of this fault code.
    To get the accurate fault code description you may use AutoHex OBD scanner

Posted on Oct 24, 2012

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What is the fix for Audi Fault code P1723


Trouble Code:
System:
Subsystem:
P1723 - (Manufacturer Specific)
Powertrain
Transmission Controls

DTC Description: Starter Interlock Circuit Open

Location:
Analysis:
Likely Cause:


Open Circuit
Possible clutch switch if manual transmission.

Sep 20, 2016 | Audi Cars & Trucks

1 Answer

I have audi a4 1996 v6 donot gode power speed When you press on the gas pedal starting slow ??Is the problem in geerbox or air system or oil pump thanks


run the fault codes as the problem may be in the accelerator position sensor or the throttle position motor if there is a problem in the transmissions the fault codes will reveal the faulty sensors/ servos and solenoids

Jan 23, 2016 | Audi Cars & Trucks

1 Answer

1999 audi a6 2.8 . The transmission doesnt shift . Its like it's in neutral all shifter is positions. Grinding when in park.Is this a fixable problem or do I need a new transmission?


before considering a transmission there are some simple and cheap things to do first
run the fault codes to find faulty servo/ solenoids
pressure test the transmission to find internal faults
change oil and clean the filter adjust bands and clutch packs while the pan is off
check replace park pawl
if you do some or all of these suggestions then you will get a good idea of the condition of the transmission so as to make an informed decision
remember the more quotes you get the better and only deal with an accredited transmission shop that offers a long warranty for the replacement box or work done.

May 22, 2015 | 1999 Audi A6

1 Answer

Cost of repairing audi being in limp mode


imp mode is activated by the ECM when certain sensors are out of set parameters . The sensors concerned cover both the engine and transmission and are set to protect both the engine and transmission. To get an idea of the cost you will first have to run the fault codes to find the fault and then get quotes to fix. It could be a simple wiring problem to complex repair/replacement effort.

Jan 31, 2015 | 2009 Audi A3

1 Answer

Ok i have a 2005 audi a4 1.8 my PRND kights stays on now when i drive it shifts hard and high rpm to 3rd,4th gears i just recently put a new transmission in 5 months ago


with all those symptoms you will be able to get some codes about the problem. once you get the codes you can get a follow up proses by knowing what part or system is no working.
you need to find a scanner that is capable to read transmission codes.

Dec 15, 2014 | Audi Cars & Trucks

1 Answer

2001 Audi A6 YELLOW check engine light comes on and the car feels like it doesn't have much pick up when I press on the gas pedal, the car has 128,000 miles on what could this mean, could it be...


You have a check or MIL lamp on

That is not anything new,they have
been on all vehicles for over 30 years

Once you retrieve the code,you will know the
system with the fault,then Google the code
& read up on the problem & solution

Aug 31, 2013 | 2001 Audi A6

1 Answer

My audi i choking when i give it gas its fine


The following are the general instructions on the start of diagnosing any electronically controlled engine or transmission problem.

The engine and the automatic transmission (transmission control is only for automatics, engine is still computer controlled no matter the transmission type) in this vehicle are computer controlled and in most cases when a fault occurs a fault code is stored in the memory of the computer control module. There are exception to this, such as the Mass Airflow Meter and fuel pressure problems. What must be done is to have all the basic testing done such as a scan of the system for fault codes as well as a check with a live data scanner tool for engine functions that are not within range of normal, a trained technician is required to know what is correct and what isn't, then based on careful diagnostics done from a factory repair manual the correct part is replaced or the wiring repaired or the computer replaced (known as the PCM), which is very rarely the problem. Other basic checks must be done as well such as mechanical problems with the engine as well as engine state of tune and mileage on the engine. The transmission can have mechanical issues as well such as no gear engagement at all or a failed pump or other pressure related problems. Also engine mechanical problems ca cause many drive-ability related problem such as rough idle and other symptoms


Oct 21, 2012 | 2005 Audi A4

1 Answer

My 99 audi a6 wen i start the car it wont stay on


The following are the general instructions on the start of diagnosing any electronically controlled engine or transmission problem.

The engine and the automatic transmission (transmission control is only for automatics, engine is still computer controlled no matter the transmission type) in this vehicle are computer controlled and in most cases when a fault occurs a fault code is stored in the memory of the computer control module. There are exception to this, such as the Mass Airflow Meter and fuel pressure problems. What must be done is to have all the basic testing done such as a scan of the system for fault codes as well as a check with a live data scanner tool for engine functions that are not within range of normal, a trained technician is required to know what is correct and what isn't, then based on careful diagnostics done from a factory repair manual the correct part is replaced or the wiring repaired or the computer replaced (known as the PCM), which is very rarely the problem. Other basic checks must be done as well such as mechanical problems with the engine as well as engine state of tune and mileage on the engine. The transmission can have mechanical issues as well such as no gear engagement at all or a failed pump or other pressure related problems.


Oct 09, 2012 | 1999 Audi A6

1 Answer

I have an audi a4 1996 2.6 v6 the auto transmission will not select gears after i drove it in very heavy rain conditions. is there a possibility water could have gotten into the transmission and if i...


The transmission should be totally sealed from rain getting in unless you were submerged,even then not really.What sometimes can occur although rare, is that in very heavy rain and slip conditions the controls and sensors for torque distribution and anti spin and lock can get a liitle confused and set off numerous fault codes.The system goes into limp home mode that usually limits revs and/or shift changes.I would first make contact with a garage or dealership that can successfully read your ecu for fault codes and clear them.Also does your speedometer and /or rev counter still function correctly,as a speed sensor fault can give a similar fault,but again it will set of a fault code.I hope this helps or at least will get us closer to a solution.

Mar 20, 2011 | 1996 Audi A4

2 Answers

A6 2006 model stuck in park


Since it is electronically programmed, it is best to
call your nearest Audi dealer service center to have it checked. Normally, replacement parts for
this kind of defect, is sold by them.

Sep 21, 2009 | 2005 Audi A6

Not finding what you are looking for?
2010 Audi Q5 Logo

977 people viewed this question

Ask a Question

Usually answered in minutes!

Top Audi Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

yadayada
yadayada

Level 3 Expert

75817 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14337 Answers

Are you an Audi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...