Question about 2004 Acura MDX

Open Question

Acura mdx headlight adjustment - 2004 Acura MDX

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 1 Answer

SOURCE: How to use TPMS in Acura MDX 2005

The TPMS light will be visible in your instrument panel like your parking brake would if activated. The TPMS function is activated automatically once any of your tires are improperly inflated. Furthermore, it will identify which tire needs attention.

Posted on Mar 14, 2009

  • 1348 Answers

SOURCE: acura mdx 2005

30000 miles.the owners manual will tell you exactly.most honda are 48000 km,exception is the cvt type transmission which there is no service done.

Posted on May 26, 2009

  • 1986 Answers

SOURCE: Headlights

The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

Posted on Sep 30, 2009

co7196
  • 3433 Answers

SOURCE: 2006 Acura MDX bluetooth stopped

Bluetooths have batteries, Rechargeable. If it won't hold a charge replace the batt.

Posted on Oct 16, 2009

  • 3 Answers

SOURCE: Need to reset the code my Acura MDX navigation

check the side of the glove box. my TL has it on the outside side panel as you look from the driver side. my honda prelude had the code there as well. hope this helps

Posted on Apr 30, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What would cause both side mirrors not to adjust when in reverse on a 2008 Acura MDX? both mirrors adjust just fine if you move them with the switch in the door but do not lower automatically when or on...


On the '04 MDX the mirror adjustment selection switch has to be in the middle position of L & R, for the mirror to re-adjust when the car is in reverse. I hope this helps.

Mar 03, 2015 | 2008 Acura Mdx

1 Answer

How to remove and replace 2006 acura mdx tour headlight assembly


head lights are held in with torqx screws or clips inside the engine compartment

Feb 02, 2015 | 2006 Acura MDX

2 Answers

2005 Acura mdx passenger side headlight out, bulb ok, fuse ok, what next


Check for power and ground at the headlight plug. Test lights are cheap.

Oct 17, 2014 | 2005 Acura MDX

1 Answer

How to change rear main engine seal on acura mdx 2001


http://www.mdxers.org/forums/73-2001-2006-acura-mdx/47786-mdx-transmission-rear-main-seal-diy-tutorial.html

Jul 31, 2014 | 2001 Acura MDX

2 Answers

Where are the fuse boxes on a 2003 acura MDX


where is the relay a/c condenser fan location?off 2003 mdx acura?

Apr 19, 2012 | 2003 Acura MDX

1 Answer

I cant find the fuse for the licences plate light


It will fused with the headlights. If all the other lights work, replace the license plate light bulb(s).

May 30, 2010 | 2004 Acura MDX

1 Answer

How do I implement Daytime Running lights on a MDX? I am importing it to Canada and require DRLs.


install a relay from the ignition switch to the headlights so when ignition switch is ON the relay is activated which activates the Light switch or just straight to the Headlights

Jan 01, 2010 | 2002 Acura MDX

2 Answers

2006 Acura MDX bluetooth stopped


Bluetooths have batteries, Rechargeable. If it won't hold a charge replace the batt.

Oct 16, 2009 | 2006 Acura MDX

1 Answer

Headlights


The adjustment screws/nuts should be located either on the top of the headlamp assembly, behind the headlamp assembly, or near the frame rail by the radiator support.

You will have vertical adjustment screws for each independent beam (separate highs and separate lows, but will be same screw if highs and lows are the same bulb). You may also have additional horizontal adjustment screws as well

Park your car on a level ground 30 feet from a wall and measure the height from the ground to the bulb and mark on a wall (do this for highs beams and low beams if the bulbs are separate, if highs and lows are the same bulb, only do it for the lows)

For Low Beams: If the headlights read VOR, then aim the brightest part or cutoff part just below the mark on the wall. If it says VOL or nothing, aim them 2 inches below the mark on the wall.

For High Beams (if separate from low beams): Aim the headlight directly at the line you marked on the wall.

Aug 01, 2008 | 2005 Acura MDX

Not finding what you are looking for?
2004 Acura MDX Logo

Related Topics:

498 people viewed this question

Ask a Question

Usually answered in minutes!

Top Acura Experts

yadayada
yadayada

Level 3 Expert

75822 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8195 Answers

Are you an Acura Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...