Question about Toyota Yaris

Open Question

Hi Have a Yaris T Spirit with keyless push button start. Tried to use the fob to open the door, it didn't work. Tried to use the key blade to open the door, it didn't work...any suggestions on the problem and solution, Thanks.

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get 2 Free calls (no credit card required) and instant help on almost anything you can think of (from cars to computers, appliances, handyman, and even pets).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 16 Answers

SOURCE: 2003 Jetta TDI - Door locks open fuel door

Look for a short in the wiring harness in the door. The wires from the door lead to the convenience module (controls the doors and windows and some other settings including remote fob) that is under the dash. It sounds like some wires are crossed. VWs are also notorious for having problems with window regulators. They make the windows go up and down and are in the doors. Something might have happen to that and it cause a short. VW just extended the warranty on the window regulators to seven years because of these problems so you should be able to take it to a dealer and not get charged (this is in the U.S. at least, don't know about the rest of the world). The extended warrranty was not limited to original owners but you might want to ask the service people about it first.

Posted on Sep 09, 2008

Ad
  • 1861 Answers

SOURCE: toyota avalon 2006 key fob apparently doesn't work

It looks like you have the "Smart Key" (a small rectangular box) that does not look like a traditional key.
What you also have is a dead battery inside the Smart Key.
Look closely at the box; there is a little button on the side. Press it. This will release a small hidden key. After you remove the small key, use a small flat blade screwdriver to pry the case of the box open at the slot provided. Take the unit to a store that sells miniature batteries, and have it replaced. You will NOT have to reprogram it after the battery is changed. The life span of the miniature batteries is roughly 20 months, less if exposed to RFI, like sitting on a TV, a monitor, or other electrical device. The Smart key TRANSMITS all of the time, even when you do not press the buttons. This is why the battery only lasts 18-20 months. Let me know if this fixes your issue..

Posted on Dec 16, 2008

SOURCE: key fob wont open doors or boot or lock them

you need to reprogram keys with the module. there could be a problem with the module though , you need to check it out

Posted on Aug 13, 2009

  • 163 Answers

SOURCE: my toyota 2007 yaris 4dr sedan keyless entry not working

they may need to recode your pad see dealer

Posted on Dec 30, 2009

  • 510 Answers

SOURCE: have mercedes E class key fob will not open doors,

If key will not turn
Car battery flat,charge or jump to activate elec ignition

Posted on Feb 06, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

My key will not start my car,then it wouldn't open the door


This model year comes equipped with Keyless Enter-N-Go, which uses an electronic transmitter in the key fob to communicate with the car. The vehicle's doors will not unlock and the vehicle will not start if the key fob is not matched to the vehicle or if the commonly-available watch battery in the key fob has been depleted. The EVIC will flash a message upon vehicle startup if it determines that the battery in your key fob is low on charge and should be replaced.

To open the doors, try the following:

1. Use the spare key fob that came with the vehicle. If the battery in your main key fob is depleted, the spare key fob's battery may still retain charge due to its much more occasional use.

2. The key fob comes with an emergency key inside of it. To remove the emergency key, slide the mechanical latch on the back of the key fob sideways with your thumb and then pull the key out with your other hand. This key will allow you to unlock the driver's side door and glove compartment. It will not start the vehicle.

To start the car with a severely-depleted key fob battery, try the following:

1. In case the ignition switch does not change with the push of a button, the RKE transmitter (Key Fob) may have a low or dead battery. In this situation a back-up method can be used to operate the ignition switch. Put the nose side (side opposite of the emergency key) of the Key Fob against the ENGINE START/STOP button and push to operate the ignition switch.

To replace the battery in your key fob, try the following:

1. Remove the emergency key from the key fob following the directions above.

2. Using a vinyl spudger tool or a flat-bladed screwdriver, gently pry the two halves of the key fob apart at the indented slot above the slot for the emergency key.

3. Replace the depleted battery with a new battery. Use the depleted battery to visually match the size. The battery is usually available wherever watch or hearing-aid batteries are sold.

4. Snap the key fob back together and replace the emergency key. If the issue is a depleted battery, your key fob should operate normally.

If the issue is not related to the state of the battery, you will probably need to contact your local dealer for service.

Source: Owner's Manual, pages 12-17

http://justgivemethedamnmanual.com/dodge/dodge-charger-owners-manual/

Mar 01, 2014 | 2011 Dodge Charger

1 Answer

My issues with my toyota yaris it's a 12 plate Toyota I went out to it Sunday keyless entry wouldn't work, and the bush button start wouldn't work I thought flat battery so got the spare same issue, I did...


That flashing light means that the antitheft device is active. If it was not the problem in the first place, when you took out the battery, it became another problem.

Nov 04, 2013 | Cars & Trucks

1 Answer

My central locking wont work after i changed battery in my 2003 saab key fob. car still starts but no central locking? any ideas


My locks didn't work for after changing my battery so one day I just pushed down my locks and then push the button and mine started working again I did it with all my doors. Hope this helps.

Jul 14, 2012 | 2003 Saab 9-3

2 Answers

Bttery is dead, can't get in, have keyless entry, no key, can't open the hood or anything, toyota venza


remove grille and move latch to open hood-boost battery and use key fob to enter or have locksmith or service station use a slim jim or other type of device to unlock door

May 13, 2012 | 2009 Toyota Venza

1 Answer

Keyless entry remote wont progam


It will not unlock the door the first time you push the button. This only registers the key fob ID into the computer. When you press the button on the key fob, press it only once and wait for the hazzard lights to flash twice again. Then open the driver's door. The key fob will not become active until you open the driver's door.

If your hazzard lights do not flash after you press the button on the key fob, there is most likely a problem with the key fob. Either it is not the correct key fob for your vehicle, or the battery is not in correctly or the key fob is defective.

The only other advice I can give you is to have it programmed with a scan tool. This way, the scan tool can verify that the computer in your vehicle is receiving the signal from the key fob.

It can be done either way, but if the "no scanner" way does not work, the rest of the system should be checked for possible problems.

Dec 12, 2011 | 2005 Nissan Altima

1 Answer

First problem started when the passenger door didn't open from outside. Now when you lock the car, the passenger door won't lock.


Sounds like the locking mechanism in the passenger door may need lubrication. You could also have a wiring issue and/or the actuator solenoid on that door could be bad. I'm assuming you are using the keyless locking fob. What happens when you push the door locking button on the driver's side door or the locking button on the passenger door itself? If these work as they should and with not hesitation then you likely have some other problem in the locking system.

Jun 11, 2011 | Volkswagen Golf Cars & Trucks

1 Answer

Car will not unlock.


To get inside the car .... Use the key in the lock cylinder, unlock the drivers door to get inside. You shouldn't have to reprogram the fob unless it or the keyless module was changed. There may be a blown fuse that supplies the keyless control module (check the owners manual for location). or wires that lead into the Drivers door may be damaged ... The keyless module is located inside the drivers door at the bottom behind the door panel ... do the unlock/lock and trunk release switches on the inside of the drivers door operate the locks and or trunk release? If so it is not the fuse ... and not the wires to it ... And it could be your BCM body control module, located in the dash board to right of your gas petal. Because the number entry keypad (code for that is on the inside of the right passenger trunk bracket arm) also doesn't work I assume it's not the key fobs themselves. Your 98 manual is correct for your car.

Apr 02, 2009 | 1998 Mercury Grand Marquis

1 Answer

Program my remote


Program your factory keyless entry functions
For 2001+ Tacomas equipped with a factory alarm or keyless entrymag-glass_10x10.gif, here are some programming options that allow you to adjust the way your locks work.
The first programming option allows you to set the entry unlock to: (A) unlock the driver door with one push, and the remaining doors with a second push OR (B) unlock all of the doors with a single push.
  • Open the driver's door. Remove the key from the ignition switch.
  • (Complete these steps within 40 seconds)
    1. Insert the key into and remove it from the ignition switch 2 times.
      (IN - OUT - IN - OUT)
    2. Close, then open the driver's door 2 times.
      (SHUT - OPEN - SHUT - OPEN)
    3. Insert the key into and remove it from the ignition switch 1 time.
      (IN - OUT)
    4. Close, then open the driver's door 2 times.
      (SHUT - OPEN - SHUT - OPEN)
    5. Insert the key into the ignition switch and leave it in.
    6. Close the driver's door.
    7. Turn the key from LOCK to ON 4 times, ending at LOCK
      (LOCK - ON - LOCK - ON - LOCK - ON - LOCK - ON - LOCK)
    8. Wait for the locks to stop, then remove the key from the ignition switch.
  • On the key fob, press and release both LOCK and UNLOCK buttons at the same time.
    1. [For all doors unlock] press and release the UNLOCK button.
    2. [For driver door unlock] press and release the LOCK button.
  • Open the driver's door. The programming is complete. If programming did not occur, start over.

Jan 13, 2009 | 2001 Toyota Tacoma

2 Answers

Door handle stuck


need to remove door panel either the linkage clip either broke or disconnected --if have remote start on fob need dealer to program--if normal try these links
Lexus Free Keyless Remote Fob Entry programming instructions Free Keyless Remote Fob Entry programming instructions procedures for all...

May 13, 2017 | 1998 Volvo V70

1 Answer

My car is acting crazy!


" turn the key on engine off 8 times. the doors will lock and unlock. push one of the buttons on the key fob and the doors will lock and unlock. do this for each remote that you have. when you are done turn the key off. the door locks will lock and unlock. the remote fob should work after this."
From My SecuriLock..

Sep 05, 2008 | 2006 Ford Taurus

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

205 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

76630 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8516 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...