Question about 1995 Eagle Talon

Open Question

1995 talon door latch

Drivers door wont open from outside, only from inside with window down whats problem door latch or actuator assembly or are they the same part?

Posted by on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
Alcatrazx
  • 65 Answers

SOURCE: 1995 eagle talon wont start

Hi

You did not specify if its petrol or Diesel I am assuming it is diesel. It might be the glow plugs. Get them checked as you will need these to get it started. If its petrol its a different issue. It might be the ignition coil (no spark) coming to the distributor. Whichever the type of car make sure that there is fuel coming to the engine. In the case of diesel you should have a primer rubber fuel pump which you press in order to bring fuel to the engine.

Hope this was of help to you :)
Thanks

Posted on Jan 07, 2009

Ad
emissionwiz
  • 76691 Answers

SOURCE: 1995 eagle talon shuts off out of nowhere

loss of spark, loss of fuel pressure, engine timing belt has come off.

Posted on Feb 17, 2009

dncholas
  • 222 Answers

SOURCE: HOW DO YOU REPAIR EXTERIOR DRIVERS SIDE DOOR

You have to replace the entire door handle piece. There's no real way to jimmy a fix on that. Mine did the same thing and just snapped.

Posted on Aug 21, 2010

emissionwiz
  • 76691 Answers

SOURCE: 1995 eagle talon manual transmission i'm able to put my clutch down and shift gears, but car wont accelerate

Something is broken, that is for sure, pull the transmission out and first look at the clutch plate.

Posted on Jul 08, 2012

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2007 pontiac G5 door assembly


The lock may be stuck in locked position in the latch assembly.
Roll the window down,reach inside the door and move the lock button to unlock JUST as you give the door a severe whack with a rubber hammer at the outside door edge 1/2 way down the door at the door latch area.
It may take more than one try to unlock the door,if that's what is wrong,but usually is.

May 18, 2017 | Pontiac Cars & Trucks

1 Answer

07 tahoe 3 doors work fine 1 wont unlock or open at all


These vehicles have weak door lock actuators.the door in question will need a new lock actuator.It comes with the door latch assembly.remove the door panel,disconnect all wiring and cable to inside door handle,peel back insulation glued to door,next remove rod coming from outside door handle from latch,remove wiring connector from latch,remove three screws holding latch in.carefull y guide latch out.

Dec 07, 2010 | Chevrolet Tahoe Cars & Trucks

1 Answer

The drivers door lock will not unlock with the key it wont open from the outside or inside


The door latch is the cause of your problem. You can pull the top of the door panel off and look down with a flashlight and use a long screwdriver to actuate the unlock rod and the door will open so you can replace the latch.

Oct 04, 2010 | 1998 Ford Explorer

3 Answers

My driver side door wont open from inside or outside


it appears you have a broken latch
the bad news is when your latch breaks like this you will end up destroying the interior door skin in order to get the door open

the good news is that almost any good garage can make the repair quickly

Apr 05, 2010 | 1997 Ford Explorer AWD

1 Answer

Driver side door wont open.


adjust the actuator rod movement to short

Oct 19, 2009 | 1995 Mitsubishi Montero

1 Answer

Rear driver-side door will not open. Neither outside handle nor inside handle release door. Electric lock does not affect the door as well as manually pulling up or pushing down the door lock.


the rod or latch has miss aligned, it will be a a hole but you have to take door card off and remove actuator to see if broken or bent, if bent you need to free up the door lock

Aug 15, 2009 | 1995 BMW 3 Series

3 Answers

ELECTRIC DOOR LOCKS ONLY LOCK SOME TIMES


if you hit the lock button a couple times, will it finally lock?

If so, then you will need to take door cover off and lube up the connectors as they probably got corroded.

Aug 14, 2009 | 2000 Ford F350 Super Duty Super Cab

1 Answer

Drivers side door jammed


You will have to roll window down and take very long screw driver to insert through glass opening and beak up latch assembly then door will open ,Then remove door panel and will be able to replace latch,Best done by proffessioal,one mistake can cost.

Jun 12, 2009 | 2006 Saturn ION

1 Answer

Cant open rear door


Sounds like you need a new latch assembly, or you lock actuator is unhooked and not unlocking your latch. Will need to try and remove the door panel to see what is going on. It will be hard to do with the door closed.

May 30, 2009 | 1995 Buick Regal

1 Answer

Rear door on driver side won't open,have taken the panel off the inside of car,seems like the lock won,t travelas far as it does on the other door.is there any way to open this door,thanks[1997 lincoln...


Rear
Removal
  1. Using a small screwdriver, remove the screw cover from the armrest of rear door trim panel (27406).
  1. Remove the two retaining screws.
  1. Using Trim Pad Removing Tool from Rotunda Windshield and Moulding/Trim Removal Kit 107-R0401 or equivalent, pry rear door trim panel from door inner panel.
  1. Disconnect electrical connectors.
Installation
  1. Position rear door trim panel on door inner panel, aligning two locators on rear door trim panel. Reverse Removal procedure.
------------------------------------------------------------------------------------ Rear
Removal
  1. Remove door trim panel and watershield. Refer to Section 01-05 .
  1. Check all connections of remote control links and cables. Service as necessary.
  1. Remove remote control assembly.
  1. Remove door latch remote control assembly from latch assembly.
  1. Drill out rivet at bellcrank and link (264B14).
  1. Remove three screws attaching latch assembly to door.
  1. Drill out rivet that attaches actuator motor to door.
  1. Remove latch assembly with actuator motor and door latch control rod lever link assembly.
Installation
  1. Install new bushings and clip onto latch assembly.
  1. Install latch with links and power lock actuator into door cavity.
  1. Position latch assembly to door, aligning screw holes in latch and door. Install three screws. Tighten to 10-13 Nm (89-115 lb-in).
  1. Attach door latch actuator motor to door with a new rivet.
  1. Install bellcrank and link to door using a new rivet.
  1. Install inside door handle and remote control assembly to door.
  1. Open and close door to check latch assembly operation.
  1. Install watershield and door trim panel. Refer to Section 01-05 .
ee8a11f.gif
Item Part Number Description 1 221A00 Door Handle to Door Latch Actuating Cable 2 26446 Rear Door Control Rod Retainer 3 377901 Plug Button 4 26412 Rear Door Latch 5 W623451-S2 Push Nut 6 224A32 Counter Balance 7 22450 Door Outside Handle Tension Spring 8 W701210-S309 Screw 9 224A20 Outside Door Handle Anti Rattle Pivot (2 Req'd) 10 22404 Door Handle 11 224A24 Front Door Outside Handle Spacer (2 Req'd) 12 264A64 Rear Door Actuating Rod 13 22408 Outside Door Handle Anti-Rattle Bumper 14 22428 Outside Door Handle Large Pad 15 N621906-S2 Nut (2 Req'd) 16 N807329 Screw (3 Req'd) 17 26595 Rear Door Electric Latch Actuator (RH) 18 W701566-S47 Rivet 19 431C04-A Rear Door Latch Striker Assembly 20 — Door Lock Striker Plate (Part of Door Shell Assy) 21 W525172-S Rivet (2 Req'd) 22 264B14 Bellcrank and Link (RH) 23 264A50 Bushing 24 N802034-SG Rivet 25 26420 Rear Door Latch Control Rod Link 26 W525172-S Rivet (2 Req'd) 27 21818 RR Door Latch (Inside) 28 A26460 RR Door Latch Push Button Rod 29 21982 Door Latch Rear Striker Assembly 30 N808377-S101 Screw (2 Req'd) 31 250A04 Rear Door Catch 32 N801010-S100 Truss Head Bolt (2 Req'd) 33 N804234-S2 Screw 34 266A74 Rear Door Latch Actuator Retainer 35 24630 Rear Door 36 26552 Rear Door Latch Control Escutcheon A — Tighten to 21-29 Nm (16-21 Lb-Ft) B — Tighten to 10-13 Nm (89-115 Lb-In) C — Tighten to 7-8 Nm (62-70 Lb-In) D — Tighten to 26-34 Nm (20-25 Lb-Ft) E — Tighten to 3-4 Nm (27-35 Lb-In)

Mar 24, 2009 | 1997 Lincoln Continental

Not finding what you are looking for?
1995 Eagle Talon Logo

Related Topics:

40 people viewed this question

Ask a Question

Usually answered in minutes!

Top Eagle Experts

yadayada
yadayada

Level 3 Expert

76691 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

Stewart Dibbs

Level 2 Expert

322 Answers

Are you an Eagle Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...