Question about 1994 Volvo 940

Open Question

Remove steering wheel on volvo 1992 940

Horn won`t work

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad

SOURCE: Remove the steering wheel or airbag from a 2004 Volvo XC90?

You need a steering wheel puller. You may be able to rent this from your parts house. Disconnect the battery for no less than 1/2 hour before disconnecting the air bag or the air bag could deploy. Place air bag facing up or it could become a projectile if set off.

Posted on Aug 14, 2009

Ad
  • 736 Answers

SOURCE: volvo xc90 2004 buzzing in steering wheel, clunck noise under car

that sounds like you are low on power steering fluid ... when the level gets low then the pump starts to ingest air and that produces a buzzing sound when you turn the wheel .....i would add or change the fluid and check for leaks and mechanical loosness in the under car linkages ...you can have that checked at your next oil change .

Posted on Apr 10, 2010

Testimonial: "Thank you, you were right I took the car in and they said the steering fluid was low. "

  • 972 Answers

SOURCE: horn and steering wheel functions not working

could be a bad clocksping the airbag is on it to but one of the thin film "wires" that are glued to it may have cracked.all the switches are on one "wire" the resistance of each switch is how the body control computer knows what button is pushed. i broke one of those clocksprings accidently when i worked at volvo so thats how i know those things are/were 1400.00$ i would take it to the dealer to have them diagnose and repair. the clock spring breaks real easy when you take off the steering wheel.

Posted on Apr 24, 2010

alicantecoli
  • 22246 Answers

SOURCE: how to remove the airbag

two screws up underneath the steering wheel ,some are spring clips and some are 7 mm bolts and some are allen headed bolts ,then air bag lifts out ,big nut in middle holds steering wheel on ,disconnect battery first though

Posted on Sep 24, 2010

  • 22 Answers

SOURCE: need to remove steering wheel

Let me start by saying I do not recommend that anyone other than a mechanic attempts this. Airbags are very dangerous to work on and should be left to professionals. If you do choose to do this yourself, take your time and be careful.

On the back side of the steering wheel there are access holes to the screws which hold the airbag in place. Before attempting anything involving an airbag, make sure to disconnect the battery and leave it disconnected for at least an hour to be safe. The required time to deactivate the airbag is less but please be safe. I don't remember the size but the bolts are torx. Once you remove them the airbag assembly will slide right out. Behind it is the ribbon cable attaching it to the steering wheel. Be very careful when removing this as to not damage the clock spring or the wiring. Good luck and please be careful.

Posted on Sep 13, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Is there a horn relay in volvo xc90 d5?


most likely a failure in the horn contact under the steering wheel
there is a carbon button that is grounded oit on a brass insert in the base of the wheel

Jan 13, 2017 | Volvo XC90 Cars & Trucks

1 Answer

Horn Not Working


The short will be in your wiring harness from the steering column. Very common failure

May 19, 2014 | Volvo 850 Cars & Trucks

1 Answer

Horn doesn't work


What happens if you apply 12v to the contact at the steering wheel, that would test the harness?
Next is to trace that wire to the next cable plug down the harness and try again. Process of elimination that you are already on.

May 19, 2014 | Volvo 850 Cars & Trucks

2 Answers

2000 dodge caravan horn won't work at steering wheel only


probably need a new clock spring. it sits behind the steering wheel. have you tested the horn pad (switch) itself?

Apr 06, 2013 | 2000 Dodge Caravan

1 Answer

The horn won't work the fuses are good


ensure there is power to the horn with the aid of a friend if so horn is defective. if not you will have to remove the steering wheel and check for connectionsthere

Apr 25, 2012 | 2000 Chevrolet 3500

1 Answer

V50 horn doesn't work


Press panic button on the remote to check if horn is broken or if the switch in the steering wheel does not work.
Also check fuse for steering wheel module.

Apr 01, 2012 | 2005 Volvo V50

1 Answer

I just replaced my turn signal switch in my 82 not 84 rampage. it works fine but when I replace the steering wheel, the horn honks and won't stop.when I look at the switch, I don't know how it...


I don't have a diagram, but if I understand what you're saying, there is a copper ring at the top of the steering column, visible before you install the steering wheel. The copper pin is connected to the horn button. The intent being that when you press the horn button, it completes the ground from the steering wheel through the horn button, through the pin, to the copper ring.
If this is correct, there should be no contact between the steering wheel and the copper ring other than the pin. Check to see if there may have been a spacer (washer, etc) below the steering wheel on the steering shaft that holds it just far enough away from the copper ring so that only the copper pin makes contact.

May 01, 2017 | Dodge Rampage Cars & Trucks

1 Answer

Volvo 850 horn does not work fuse is ok


If you can find the horn you can take a two wires and run the from the positive and negative posts of the battery. Horns don't usually fail. the horn switch is in the steering wheel and could have open wires in the wiring harness that that runs down the steering column. Lastly there is a horn relay that is wired between the switch and horn. The easiest thing is to take off the horn wire and spray some WD40 on the terminal and on the horn. Tighten up the terminal end with a pair of pliers for a snug fit.

Mar 11, 2011 | Volvo 850 Cars & Trucks

1 Answer

Horn and steering wheel functions not working


could be a bad clocksping the airbag is on it to but one of the thin film "wires" that are glued to it may have cracked.all the switches are on one "wire" the resistance of each switch is how the body control computer knows what button is pushed. i broke one of those clocksprings accidently when i worked at volvo so thats how i know those things are/were 1400.00$ i would take it to the dealer to have them diagnose and repair. the clock spring breaks real easy when you take off the steering wheel.

Apr 24, 2010 | 2003 Volvo XC90

1 Answer

The horn on our 2006 Volvo S60 doesn't work, any tips on resolving this problem?


First check the fuses, then check the horn relay. if that's still not it then check the wiring on the back of the horn body. and if still nothing then then it's either the connection inside the steering wheel or the horn body it's self. i know it's a lot to a horn isn't it?

Feb 04, 2010 | 2006 Volvo S60

Not finding what you are looking for?
1994 Volvo 940 Logo

Related Topics:

250 people viewed this question

Ask a Question

Usually answered in minutes!

Top Volvo Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6927 Answers

Are you a Volvo Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...