Question about 1999 Kia Sportage

Open Question

P1505 Kick-Down Servo Switch - 1999 Kia Sportage

Posted by Anonymous on

Ad

2 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
New users get to try the service completely Free afterwhich it costs $6 per call and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
cansmo
  • 2431 Answers

SOURCE: my 99 kia Sophia I

P1505 ? A Kickdown servo. Clear the code P1505 is Idle air control coil opening signal low. Basically the IAC is malfunctioning.Or your IAC is short to ground. P0731 Incorrect first gear ratio here are some of the causes ,Low ATF fluid,Low line pressure,Your solenoid line malfuntion or the valve itself. Clear the code and perform a transmission relearn

Posted on Sep 12, 2011

Ad

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

700r wont shift into overdrive how do u adjust the lets say kick down cable how do i adjust


kick down cables will not operate the over drive
they just select the next lower gear for passing , pulling heavy loads or going up hill.
check the fault codes for a od servo./ solenoid problem

May 10, 2015 | Cars & Trucks

1 Answer

98 manual vw passat cruise control not working any ideas to start and find the problem


Apr 08, 2014 | 1998 Volkswagen Passat

1 Answer

98 manual Vw passat cruise control is not working any help on where to start to find the problem


Apr 08, 2014 | Cars & Trucks

1 Answer

P1709 hyundai


i typed that in google and got 7,000 hits.
P1709 Hyundai - Kick-Down Servo Switch4th hit (pant)
http://www.myhyundaiforums.com/TSB/xml/03-40-018.swf

Oct 16, 2013 | Cars & Trucks

1 Answer

1999 hyundia sonata wont get out of 3rd gear


Mine did the same, replace kickdown servo. if not the problem, replace tranny.


Apr 02, 2013 | 1999 Hyundai Sonata

1 Answer

I cant find the passing gear line on my 99 galant es


make sure you have tps sensor reconnected.and check transmission kick down servo make sure its been reconnected.

Mar 28, 2013 | 1999 Mitsubishi Galant

1 Answer

2001 Jeep Grand Cherokee won't shift out of "low gear"


check kick down band adjustment,to tight,or lose,DON'T, over losen, a part inside the transmission will drop out inside transmission causing disasembly to be needed,check linkage first,could also be sticking servo which works the kick down band

Nov 03, 2011 | 1993 Jeep Grand Cherokee

1 Answer

My 2006 ford five hundred gas throttle seems to get stuck when at a stand still. my foot is on the brake. it acts if it will move forward and does often. what could the problem be?


Check this out: the auto trans has a servo pack in it, this controls the trans at stop to kick out of gear and not try to pust or continue to drive forward. This is hard to explain to you i have done this procedure many times, the servo pack controls the trans to kick up and down between gears and when you come to a stop it also controls the trans that you are at idle, stand still, if the car wants to move forward that is most likely the problem. This is a very hard part to replace, if you haven't done somthing like this before, take it to a trans shop, not a general mechanic shop.

Aug 08, 2011 | Ford Five Hundred Cars & Trucks

1 Answer

4wd light flashes and have replaced the front actuator switch and the encoder(transfer case motor) and nothing has changed. it sounds like it wants to kick in but never fully engages. I have had people on...


after looking at the schematics for this vehicle, I can say with great certainty that you might have something wrong in your front axle on a straight axle model that wont let the servo engage the front axle. Now if you have independant front suspension, then where the servo motor goes into the transfer case could be the problem. pull the servo motor from the case/axle and look at the engaging mechanism. You are looking for worn parts that could cause binding or broken parts. This servo motor gets its command voltage from the ecm. The signal for the ecm generates from the transmission and your in cab switch. If you can hear the motor trying to engage, then all the other factors are working up to the motor arm. The light is just a by product of the ecm trying to engage the front axle

Sep 23, 2009 | 1996 Chevrolet K1500

1 Answer

2001 accent code P1703


P1709 referrs to KICK DOWN SERVO SWITCH >- Open, short circuit DESCRIPTION Detects the point of time when K/D band starts operation to control fluid pressure when K/D band operates. Detection condition 1st or 3rd gear signal is present for more than 5 sec. Transfer shaft speed is greater than 900 rpm Fluid temperature is above 60°C PCM receives an "OFF" signal from K/D servo s/w Check item Harness & connnector K/D servo s/w K/D servo assembly

Jun 11, 2008 | 2000 Hyundai Accent

Not finding what you are looking for?
1999 Kia Sportage Logo

Related Topics:

267 people viewed this question

Ask a Question

Usually answered in minutes!

Top Kia Experts

Colin Stickland
Colin Stickland

Level 3 Expert

22219 Answers

yadayada
yadayada

Level 3 Expert

76630 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8499 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...