Question about Cars & Trucks

Open Question

2006 smart fortwo oil pan removal

How do I remove the oil pan?

Posted by Anonymous on

Ad

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 6 Answers

SOURCE: remove oil pan

Try this, before removing bolts, breaking loose the factory gaskets seals, fighting with cross members and steering joints, some vehicles can never get done correctly unless a professional mechanic with proper tools and educated ways of removing a oil pan. clean it up where the crack is place some paper towel there after draining out all the oil you can, hint-- might need to sit a day with clean paper towel under it making sure its not releasing any more oil out the crack, scrub it with sand paper when its all dry and clean place some "seal all" brand glue over the crack seal all works on oil, grease, gasoline,must be absolutely clean and dry first. after two coats it dries fast then place some paper in third layer to give more stability to the patch. most of the time you will not need to replace the oil pan. if it still leaks get a good book on your vehicle in the public library they give instructions on most all repairs.removal and replacement.

Posted on Nov 09, 2008

Ad
  • 42 Answers

SOURCE: How to remove oil pan?

Junkyard for the pan. Either that or go an import specific shop, they should be able to at least you find one.
I highly doubt that you have to drop the whole engine. You shouldn't have to completely remove the transaxle to pull the oil pan but you probably do have to pull a few bolts.  By the way, if your oil pan is leaking, you can most likely just replace the oil pan gasket unless it is really warped.

Posted on Mar 10, 2009

  • 51 Answers

SOURCE: oil pan removal on 2002 gmc sierra

did you pull the rubber plugs between the motor and trans out? there are either nuts or bolts up there

Posted on Mar 15, 2009

c17hydro
  • 2984 Answers

SOURCE: 2003 oil pan removal

4.0L Engine To Remove:

  1. Disconnect negative battery cable.
  2. Lift the vehicle.
  3. Drain the engine oil.
  4. Remove or disconnect the following:
    • Exhaust pipe from exhaust manifold.
    • Exhaust hanger at the catalytic converter and lower the pipe.
    • Starter motor.
    • Flywheel/torque converter housing access cover.
    • Oil level sensor (if equipped).
  5. Place a pole jack under vibration dampener with a piece of wood between dampener and jack.
  6. Remove or disconnect the following:
    • Engine mount through bolts and raise engine for clearance to remove pan.
    • Transmission cooler lines (if equipped).
    • Oxygen sensor harness from oil pan mounting studs.
    • Oil pan bolts and studs.
    • Oil pan and gasket.
To Install:
  1. Clean the gasket mating surfaces.
  2. Apply Mopar® Silicone Adhesive Sealant or equivalent onto the cylinder block in four location as shown.
7605306.gif

  1. Attach the pan gasket to the oil pan with Hi-tack or equivalent (2003-2005 vheicles).
  2. Use 1 ½ x ¼ inch bolts to fabricate alignment dowels. Cut off the head of the bolts and cut a slot into the top of the dowels (2006 vehicles).
4e495fd.gif

  1. Install two dowels into the timing case cover (2006 vehicles).
  2. Install two dowels into the cylinder block (2006 vehicles).
  3. Place the gasket over the dowels and onto the cylinder block and timing case cover (2006 vehicles).
  4. Position the oil pan.
  5. Install the 1/4 inch oil pan bolts. Tighten to 84 in-lb (9.5 Nm).
  6. Install the 5/16 inch oil pan bolts. Tighten to 132 in-lb (15 Nm).
  7. Remove the dowels.
  8. Install the remaining 1/4 inch oil pan bolts. Tighten to 84 in-lb (9.5 Nm) (2006 vehicles).
  9. Lower the engine onto the engine mounts.
  10. Install the through bolts and tighten the nuts.
  11. Remove jack stand and remove the piece of wood.
  12. Install the flywheel and torque converter access cover.
  13. Install starter motor.
  14. Connect the exhaust pipe to the hanger and to exhaust manifold.
  15. Install the transmission oil cooling lines (if equipped).
  16. Install the oxygen sensor wiring supports to the oil pan mounting studs.
  17. Install the drain plug into the oil pan. Tighten to 25 ft-lb (34 Nm).
  18. Lower the vehicle.
  19. Connect negative battery cable.
  20. Fill the oil pan with oil. WARNING
    Use extreme caution when the engine is operating. Do not stand in a direct line with the fan. Do not put your hands near the pulleys, belts or fan. Do not wear loose clothing.
  21. Start the engine and inspect for leaks.

Posted on Jun 06, 2009

  • 834 Answers

SOURCE: removal procedure of oil pan for a 1997 chevy

To remove the engine oil pan either the engine has to be lifted all the way off of the motor mounts and the oil pan should just clear the flex-plate and transmission, or the front axle dropped down out of the way, or the transmission and flex-plate will have to be removed.

Usually if the engine can be lifted enough to fit a piece of 2x4 wood between the motor mounts and the frame then the oil pan will usually just have enough clearance to be removed from the rear and the oil pan should just clear the transmission and the flex-plate. Also, be sure to check that the fan blade does not damage the fan shroud when lifting the engine.

Let me know if you require any further assistance.

Posted on Jul 26, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do i change feul filter Smart Fortwo 2006 deisle


http://www.fixya.com/cars/t4194955-location_diesel_filter_2006_smart_car

Jul 24, 2014 | 2006 Smart ForTwo Cabriolet

1 Answer

Locksmith can unlock immobilazer?


Doubt that very much , as Smart has a very strong security on it

Feb 21, 2014 | 2006 Smart ForTwo Cabriolet

1 Answer

My keys lost their programms


Unlikely both keys have lost the programming.

Remove the car battery and give it a full charge, leave side light switch "on" while battery is removed to provide discharge path for the engine management system. Refit battery and try again.

Feb 20, 2014 | 2006 Smart ForTwo Cabriolet

1 Answer

How to get sparking plugs out of smart 698 engine


You have to be careful with that , as you need a special tool to remove the wires , other wise you might damage the plug wires. But if you can remove the wires , rest is easy , just remove the plug and replace , BUT MAKE SURE THAT THE CAR IS COLD when you do that

Nov 09, 2012 | 2006 Smart ForTwo Cabriolet

1 Answer

Replacement of the oil pan on a cadillac 2006 DTS


Big job.

gmlogoflat.gif Service Information
bhome.gifbpublication.gifbnumsrchbutton.gifbnews.gifymkbutton.giffeedback.gifbhelp.gif
2006 Cadillac DTS ' DTS VIN K Service Manual ' Document ID: 636855 Oil Pan Removal

    1527739.gif
    tif.gif
  1. Rotate the engine so that the oil pan is facing up.
  2. Remove the oil pan drain plug.

  3. 1373472.gif
    tif.gif
  4. Remove the oil pan bolts.

  5. 1373475.gif
    tif.gif
  6. Remove the oil pan from the lower crankcase oil distribution manifold plate.

  7. 1373484.gif
    tif.gif
  8. Remove and discard the oil pan gasket.

  9. 204585.gif
    tif.gif
  10. Remove the oil level sensor (1).

Jul 29, 2011 | 2006 Cadillac DTS

1 Answer

How do you get the oil pan off of a 2006 dodge stratus 2.7L


Hope this helps and please don't forget to rate!


  1. Disconnect the negative battery cable.
  2. Remove the engine oil dipstick and tube.
  3. Raise and safely support the vehicle.
  4. Drain the engine oil and remove the oil filter.
  5. Remove the structural collar.
  6. Remove the exhaust cross-under pipe.
  7. Remove the torque converter housing cover.
  8. Remove the lower bolt attaching the A/C compressor to the oil pan.
WARNING!!!!!
Be sure to remove the 2 bolts attaching the timing cover to the oil pan, as damage to the timing cover and/or oil pan may occur.
  1. Remove the oil pan attaching fasteners.
  2. Remove the oil pan and gasket.

May 08, 2011 | 2006 Dodge Stratus

1 Answer

Where do i find the oil dip stick on a smart car?


In the boot, under the carpet, remove the cover plate dipstick is to the right hand side.

Feb 02, 2011 | 2008 Smart fortwo

3 Answers

I have a smart fortwo 2006 plate billowing white smoke everywhere.....help what is wrong with my car?


was transmission fluid poured in oil by mistake is oil over full is it comeing from exhaust pipe if none of theses things fix it have oil changed put stop smoke in or oil treatment

Dec 13, 2010 | 2008 Smart fortwo

3 Answers

I would like to change the oil in my 2006 Smart Car diesel. I was told I couldn't because the oil had to be pumped out. Is that True?


I just had my oil changed in my 2006 deisel smart..and yes it had to be pumped out as they don't have a drain plug on a lot of the older modls. I understand that the newer ones have a plug.

Oct 25, 2010 | Smart fortwo Cars & Trucks

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

30 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...