Question about 2007 Hyundai Accent GS Hatchback

Open Question

How to set up a variable valve timing chain on a 07 hyundai accent with a 1.6 dohc engine

Pulled the head on this 1.6 engine with variable valve timing, need to know how to set the timing chain, on dohc engine

Posted by Anonymous on

6 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

  • 740 Answers

SOURCE: timing belt on my 2002 hyundai accent 1.6 liter 4cyl

DID THE BELT BREAK AND THEN IT WAS CHANGED. If so then you may have bent valve. IF NOT then vehicle may be timed wrong. Here is a diagram of your timing marks, http://www.2carpros.com/car_repair_information/tec_info/2002/hyundai/accent/2002_hyundai_accent_timing_belt_diagram_marks.htm contact if you need more help. Thanks for using FIX YA

Posted on Jan 23, 2009

motor1258
  • 6674 Answers

SOURCE: replace valve stem oil seals

Make up an airline fitting that will screw into spark plug hole, or buy from autoparts , or tools supply place. You put compressed air in cylinder while changing, which holds valves in place.

Posted on Feb 21, 2009

SOURCE: Hyundai accent 07 mp3-03 security code

IT WIL LOCK YOU OUT BUT IF YOU LEAVE IGN.ON ACC. FOR TWO HOURS IT WILL RESET AND ASK FOR CODE AGAIN.

Posted on Jul 17, 2009

  • 1757 Answers

SOURCE: timing belt on huyndai accent 2001

My sincere apologies for the severly delayed response.
I am personally going back to answer your unanswered questions. I have only been on this site for the past 4-months as a free contributor.

I do not know if you still need this information, however I am answering it - in case you still do.

Click on the following direct Link. It has several Diagrams for your 2001 Hyundai Accent Timing Belt and Marks.


Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!


http://www.2carpros.com/car_repair_information/year/2001/make/hyundai/model/accent/2001_hyundai_accent_timing_belt_diagram_marks.htm

Posted on Mar 19, 2010

  • 1757 Answers

SOURCE: trouble replacing timing belt ... setting timing

Sorry for the severe delay.
I am personally going back to answer your unanswered question.
I do not know if you still need the answer, but I am going to answer it in case you still do.

Click on the following direct Link. It has the Timing Belt Diagrams with Marks for the Camshaft and Crankshaft that you will need. It also has numerous other helpful diagrams for use.

Again my apologies...
Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!


http://www.2carpros.com/car_repair_information/year/1996/make/hyundai/model/sonata/1996_hyundai_sonata_timing_belt_diagram_marks.htm

Posted on Mar 25, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a 94 Hyundai Excel. I am replacing the clutch but can't find the torque settings anywhere.


clutch/flywheel torque settings - Hyundai Forums : Hyundai Forum

www.hyundai-forums.com/...accent/146383-clutch-flywheel-torque-setti...

Aug 2, 2012 - 3 posts - ‎2 authors
Im after the torque setting for the clutch and fly wheel for a lc 2000 accent with the dohc 16v engine. cheers.Missing: .94

Torque value head bolts 1994 hyundai excel 1.5l - Fixya

www.fixya.com/cars/t12339610-torque_value_head_bolts_1994_hyundai
Apr 7, 2012 - SOURCE: torque settings for a hyundai accent 1500 1998. cylinder ...SOURCE: how d i change a clutch in a hyundai excel 1994. Hi first lift the ...

Flywheel & Pressure Plate Torque Specifications? - Hyundai ...

www.hyundaiaftermarket.org > ... > Engine, Intake, Exhaust

Dec 19, 2015 | Hyundai Cars & Trucks

2 Answers

How replace timig chain in accent dohc


should be 1.6L engine. easy to replace but is a belt not chain. unless you know how to line up camshaft / crankshaft, I'd pay for the labor. full kit on RockAuto.com is about $50

remove front right wheel, unbolt engine mount top passenger side, loosen accessory pump at top, remove timing belt covers (upper & lower), replace belt and idlers from kit.
to reassemble....reverse steps.
yes, it is that simple BUT not for a neophyte. inspect original belt before replacement, if no cracks, I'd leave alone. mine had 145,000 at replacement and was still good.

Jan 03, 2013 | 2007 Hyundai Accent GS Hatchback

1 Answer

Does the 2006 accent have a timing belt or chain, and what is the recommended change schedule? If the belt breaks, will it ruin the engine?


It uses a belt. The maintenance schedule is to replace it every 60,000 miles or every 5 years (whichever occurs first). The 1.6 L engine is an 'interferrence' engine which means if the engine valve timing jumps, the pistion heads will strike the valves if they're open when they should be closed/closing.

Sep 12, 2011 | 2006 Hyundai Accent

2 Answers

Torque settings for a hyundai accent 1500 1998 model torque settings for head , conrods and crank


cylinder head bolt torque

52-55 ft lbs. cold engine
59-63 ft lbs. hot engine

connecting rod cap nut 26-28 ft lbs. SOHC
connecting rod cap nut 23-26 ft lbs. DOHC

main caps 41-44 ft lbs.

Dec 19, 2010 | Hyundai Motor 1998 Accent

1 Answer

Head gasket got bent and I have replaced it . Now the problem I'm facing is how to set the crank shaft and the comshaft timing. I need the procedure for engine timing


Timing Chain & Gears Removal & Installation To Remove:
NOTE: Keep the cam chain away from magnetic fields.
Crankshaft set at TDC marks hnda_trk_crv_crank_tdc_marks.gif

  1. Turn the crankshaft pulley so its Top Dead Center (TDC) mark (1) lines up with the pointer (2).
  2. Raise and support the vehicle.
  3. Remove the front tires/wheels. Front undercar splash shield hnda_trk_crv_frt_under_splsh_shld.gif

  4. Remove the front undercar splash shield.
  5. Remove the drive belt.
  6. Remove the cylinder head cover (See section on Valve Cover).
  7. Remove the crankshaft pulley (See section on Crankshaft Damper). CKP sensor and VTC solenoid electrical connectors hnda_trk_crv_ckp_vtc_ele_conn.gif

  8. Disconnect the Crankshaft Position (CKP) sensor connector (1) and Variable Valve Timing Control (VTC) oil control solenoid valve connector (2).
  9. Remove the VTC oil control solenoid valve (See section on VTC Solenoid Valve).
  10. Support the engine with a jack and wood block under the oil pan. Ground cable and upper bracket removal hnda_trk_crv_grnd_cbl_uppr_brckt_rem.gif

  11. Remove the ground cable (1), and remove the upper bracket (2). Side engine mount bracket removal hnda_trk_crv_side_eng_mount_brckt_rem.gif

  12. Remove the side engine mount bracket. Timing chain cover removal hnda_trk_crv_timng_chain_cov_rem.gif

  13. Remove the timing chain cover bolts both from the front to the block and from the bottom to the oil pan.
  14. Remove the timing chain cover.
  15. Loosely install the crankshaft pulley. Compress the timing chain auto-tensioner hnda_trk_crv_compr_tim_chain_auto_tensnr.gif

  16. Turn the crankshaft counterclockwise to compress the auto-tensioner. Lock the timing chain auto-tensioner hnda_trk_crv_lock_tim_chain_auto_tensnr.gif

  17. Align the holes on the lock (1) and the auto tensioner (2), and then insert a 0.06 inch (1.5 mm) diameter pin (3) into the holes.
  18. Turn the crankshaft clockwise to secure the pin. Removal of the timing chain auto-tensioner hnda_trk_crv_rem_tim_chain_auto_tensnr.gif

  19. Remove the auto-tensioner. Removal of the timing chain guide B hnda_trk_crv_rem_tim_chain_guide.gif

  20. Remove the cam chain guide B. Removal of the timing chain guide A hnda_trk_crv_rem_tim_chain_guidea.gif

  21. Remove the cam chain guide A (1) and tensioner arm (2).
  22. Remove the cam chain.
prev.gif next.gif

Oct 11, 2010 | 2002 Honda CR-V

2 Answers

TIMING CHAIN CHANGE


hyundai recommends replacing the belt every 60,000 miles or 48 mos and this is an "interference" engine which means if the belt breaks, it will cause internal engine damage. happy holidays

Dec 28, 2009 | 2001 Hyundai Accent

2 Answers

Timing belt snapped


hi from uk the cambelt timing marks for accent 1.3/1.5 petrol are as follows= the cam cog has a hole drilling between the outer toothed and the central securing bolt this hole at TDC number 1 cyl is at top central and lines up with a V cut in the cyl head at rear of cog ? the crank cog at TDC number 1 cyl is a pop mark on both the cog and on thefront face of engine quite noticable ! these line up and are at approx 12 -30 pm when viewed fit new belt from crankcog in anticlockwise ie crank then cam then tensioner HOWEVER! if you are considering just replacing belt and tensioner ? be warned this engine is an interferance engine that is to say if belt fails whilst driving there may/will most probably be damage to the valves (bent) due to contact with pistons so would advise caution and suggest compression test all cyls after fitting new belt and tensioner and before rebuild completely once valves have bent they will not contact pistons again but you will have serious missfire/s and probably back fire up inlet manifold coupled with failing to start if engine is high milage ? consider removal of cyl head and check? de coke and replace damaged or best all valves then engine will have improved performance and more milesin future hope this helps

Nov 28, 2009 | 2001 Hyundai Accent

1 Answer

Does a Hyundai 2002 1.6L DOHC have a timing belt or chain? If it's a chain, does it need to be replaced?


If you have an Accent which I believe that you do, it has a belt which needs to be changed every 60-80k miles. This vehicle has what is called an interference engine which basically means that if the belt breaks, the engine will continue to turn BUT the camshaft stops. If any of the valves are open the piston will slam into the open valve (interfere) and you will be looking at a new engine. I would recommend changing the water pump at the same time as well as the tensioner. I would also have the pulleys inspected by a professional mechanic and replaced as needed. If you just change the belt and the tensioner or the pulleys are weak then you can have premature breakage.

Nov 21, 2008 | 2002 Hyundai Accent

Not finding what you are looking for?
2007 Hyundai Accent GS Hatchback Logo

Related Topics:

209 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

75817 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8180 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...