1997 GMC Jimmy Logo

Related Topics:

Posted on Jan 02, 2009
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

Blinkers not working on 97 jimmy

My blinkers don't blink on our 97 Jimmy. I have checked all the lights and they are working. When I turn on the blinkers they turn on and off the way that they should but don't blink. I have checked all the fuses and they are good. I have purchased a thermal flasher but can't find where to replace it on this car.

  • 1doug Mar 28, 2009

    Same problem but the blinkers don't even work at all. The emergency flashers work, but not the blinkers, Please help.

  • Anonymous Mar 31, 2014

    My radio turns on but has no sound. The blinkers flask, but no sound and the backup warning system does not alert with any noise. I checked the fuses and the are in good shape.

×

1 Answer

Anonymous

Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

Hot-Shot:

An expert who has answered 20 questions.

  • Expert 83 Answers
  • Posted on Jan 03, 2009
Anonymous
Expert
Level 2:

An expert who has achieved level 2 by getting 100 points

MVP:

An expert that got 5 achievements.

Governor:

An expert whose answer got voted for 20 times.

Hot-Shot:

An expert who has answered 20 questions.

Joined: Jan 03, 2009
Answers
83
Questions
1
Helped
46398
Points
150

Located uner dash near centre must pull down all plastic inder dash there should be more then one flasher module there should be right in front of centre concole.

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

I have a 96 gmc jimmy that my rear blinkers are not working when I have brakes pressed and turn blinkers on brake light cuts off I've checked fueses and bulbs any thoughts

no car told at all, zero
maker,model,year, (or VIN)
gee does car drive okay,engine runs okay?
check fuses says the blind, generic man.
0helpful
1answer

How to repair not working rear lights 1997 gmc jimmy

brake lights not working - 1997 GMC Jimmy - RepairPal

repairpal.com > Questions > GMC > Jimmy > 1997 GMC Jimmy
Jan 11, 2011 - hi about 2 days ago i realized my brake lights were not working but my turn signal lights were working and parking lights as well but no brake ...

Tail Lights don't work but third brake light does, not fuses ...

answers.edmunds.com > Edmunds Answers
Sep 23, 2009 - 97 GMC Jimmy 4x4 blinkers work, reverse lights work, above window ... I just lost hazard lights and rear brake lights, they were working 2 days ... If it is a frayed wire or solder point, then you can repair it, but not any worn contacts. ... Does anyone have any suggestions on 1997 Honda Accord tail & brake lig.
0helpful
1answer

Blinkers not working 97 gmc jimmy

You may need a voltmeter to check if power is going into the turn signal switch. Start at the turn signal fuse and see if power there, with key on.
0helpful
1answer

Blinkers won't work

Sounds like a flasher relay to me.
0helpful
1answer

Blinkers and hazard lights don't work

check the dealer but I believe there was a RE-CALL for this same problem
0helpful
1answer

GMC sierra 1500 '96 blinkers and brake lights will not work

i would replace the brake light swtich first its more likly too go bad than the turn signal switch
2helpful
2answers

1997 jimmy 4.3L 4x4 wont start

I had the very same problem with my 97' jimmy. I finally replace the ignition wiring harness. That controls the electrical going to the dash. Blinkers, gauges, fuel pump, I also replaced the Key switch just in case. Started right up all gauges work,blinkers everything.
0helpful
1answer

97 jimmy power seat wont work, blinkers wont work

I have ur aswere for the blinkers. u have to change the breakers under the stereo where the outputs are. there are to gra things
1helpful
1answer

Blinkers light up don't blink. where is switch ?

in the steering column attached to your blinker arm.
Not finding what you are looking for?

295 views

Ask a Question

Usually answered in minutes!

Top GMC Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

john h

Level 3 Expert

29494 Answers

Are you a GMC Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...