Question about 2004 Dodge Grand Caravan

Open Question

Clicking noise when put car in gear dodge grand caravan

When step on gas or put car in drive, reverse or park there is a loud click.

Posted by Anonymous on

Ad

5 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 1779 Answers

SOURCE: 2004 dodge grand caravan - clicking when turn key to start

You might want to take the battery out and have it checked. Parts stores will check it for free, so that would be 1st step. Make sure connections are clean and tight. If it's the original battery, it's 4 years going on 5 old, which is the life span expected, and the clicking noise can be classic bad battery symptom. If battery checks out ok, it may be the starter, so 1st make sure the battery is good. countrycurt0

Posted on Sep 29, 2008

Ad
  • 1 Answer

SOURCE: Tranmission problem on 1999 Dodge Grand Caravan

Dear wramlal

I had the same problem, drove home just like you did, took it to my mechanic and he changed the "speed sensor " problem solved. "

Posted on Dec 07, 2008

ourhowse
  • 2007 Answers

SOURCE: loud clicking noise which the clicking noise getss faster as i accelerate

From what you are describing it sounds like it must be a valve lifter sticking. Try putting a cup of transmission oil in your crankcase, or pick up some suitable additive from your local parts store. I wish i could hear it and give you a better idea. Maybe let them listen to it at the parts store, and they can determine if it's a lifter or not. Let me know how you make out.

Posted on May 21, 2009

  • 3600 Answers

SOURCE: My 2007 Dodge Grand Caravan makes Whining Noise

Depending on your mileage, if the transmission is mounted side ways (Front wheel Drive) the upper or top, or rear mount can wear out. This causes the engine and transmission to twist binding the linkage on the transmission, However I have not see a 2007 and if it was bad the drive train should still be under warranty if it's not over 100,000 miles. The tork on the other mounts could cause this noise you are speaking of. Also they use oil filled mounts to isolate the engine pulses so when the oil leaks out the motor mount goes metal to metal. However I think the brakes not holding tight so in theory a motor mount could cause this could cause it. A way to test it is put the transmission in forward gear then reverse if it makes a clunking sound then you have some wear somewhere. If you have another person put it in forward and reverse and watch the engine you can find where the noise is coming from. However I will see if it is listed as an after market part and give you a link that you can look at and the price for each. After looking at one of the mounts this may not be your problem here is the link and the price for one of the mounts.
http://shop.advanceautoparts.com/webapp/wcs/stores/servlet/product_Engine-Mount-Anchor_3264483-P_27_R%7CGRPENGPAMS____

Posted on Aug 21, 2009

Testimonial: "Thanks Avid..:)"

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2002 Saturn L300 starts goes in reverse is very loud then dies


Sounds like your timing belt jumped a tooth or two. Any idea how long it's been since it was replaced ?

Jul 10, 2014 | Saturn L-Series Cars & Trucks

1 Answer

Neutral safety switch


Maybe the Shift interlock cable is your problem from shifting from drive to park but not sure about the reverse.

Mar 18, 2014 | Mazda Millenia Cars & Trucks

1 Answer

Transmission


Either an adjustment problem, pump or even worn clutches.

Aug 18, 2017 | 1998 Dodge Caravan

1 Answer

96 ford wont go into park, drive, or reverse unless in 4 wheel low


Is this a auto or Manual I ask as you say flywheel and all gears. tall us a little more. what is the gearbox ?. have you looked at the oil level and under it at the rear tail shaft, crosses. in 2 wheel drive and running can you get it into park. DON'T try to hard at this as it can damage the auto. If you can drive in 4 wheel low in all gears then it sounds like you may have a problem in the drive line. Tall us more

Jan 07, 2013 | 1996 Ford Explorer

1 Answer

I was getting ready to pull out into traffic while my van was in drive. i hit the gas to go, heard a loud clunk, and then the van wouldn't do anything. i press the gas, and it just revs, i put it in...


sounds like a broven cv shaft have you been hearing a clicking noise when turning this indicates a bad shaft or do you have bad motor mounts this can also cause cv failure

Feb 14, 2011 | 2008 Chrysler Town & Country

1 Answer

Volvo 2006 S60 refuses to move in reverse direction


your problem lies in the internal parts of your transmission which are the clutch linings, they are already worn out and starts to slide.

May 28, 2010 | 2002 Volvo S60

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

307 people viewed this question

Ask a Question

Usually answered in minutes!

Top Dodge Experts

yadayada
yadayada

Level 3 Expert

76164 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8273 Answers

Are you a Dodge Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...