How do i remove part # 92415-ea000 from a 2006 nissan pathfinder

The 2008 Nissan Pathfinder is a popular SUV that was released in the fall of 2007. The Pathfinder has many features, including a V6 engine, automatic transmission, and 4-wheel drive. One common issue that arises with this vehicle is the removal of the right hand kick panel trim. In this article, we will show you how to remove the trim so that you can access the electrical components located behind it.

Nissan xterra alternator removal and installation - YouTube

? 2:53
https://www.youtube.com/watch?v=n35OVegqBsg
Feb 7, 2014 - Uploaded by Francisco Delira
2001-2004 Nissan xterra alternator removal and installation removing ... how to replace the alternator on ...

How to Change an Alternator : Removing the Serpentine ...

? 4:02
https://www.youtube.com/watch?v=nJgVJNtZxuA
Oct 18, 2007 - Uploaded by expertvillage
Learn how to remove a serpentine belt with expert car maintenance tips in this fre... ... How to Change an ...

Alternators ' Starters ' Belt Tensioner ' Tensioner Pulley ...

https://www.pepboys.com/parts/alternators_starters/

Pep BoysFind alternators, alternator belts, parts and starters you need at Pep Boys. ... Regulators; Alternator Relays; Belt Tensioners Pulleys; Alternator Repair Kits ...

2001 Pathfinder alternator installation problems - Nissan Forum

www.nissanforums.com/pathfinder/172789-2001-pathfinder-alternator-i...

Dec 14, 2012 - 10 posts - ‎3 authors

Check on youtube for videos on it. You will have to remove the inner door panel-the hardest part-to get to it. Then take off the latch rods-unclip them and remove the two screws or bolts holding the old handle to the door frame, then as you remove it, work the latch rods out of their respective holes.

Click on link to view water pump removal guide.http://www.autozone.com/autozone/repairinfo/repairguide/repairGuideContent.jsp?fromSearchPage=true&pageId=0996b43f80376c60&partName=Removal+%26+Installation&partId=0996b43f80376c60

Remove the air duct on the engine and Disconnect the harness and brackets around the ignition coil and remove the ignition coil. Unscrew and remove the spark plug and replace it with new spark plug in to the cylinder well and tighten it. Make sure to adjust the tension of spark plug as per the specification of spark plug manufacturer. You can find all Nissan Pathfinder parts at http://www.carpartswarehouse.com/carmodels/CP10/Nissan/Pathfinder.html

Well, let me just say that you have to remove the intake manifold (the one with 6 metal pipes) to remove the knock sensor. It is not easy to remove the intake manifold on Nissans.

nissan pathfinder thermostat is located on the bottom hose. where the coolant in from the radiator. make sure the coolant is cool enough before remove the hose.

screws in armrest and a swift tug

open the glove box and press on one side to get it open completely
remove the screw on the cover
remove the air filter
make sure you put the new one in with the right dirrection of air flow

The dipstick is located under the air cleaner on the right-hand side, identified by a yellow ring.