Question about 2008 Mazda 3

Open Question

Assembly diagram for 2008 mazda 3 rear bumper

Rear bumper assembly diagram

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Ad
  • 72 Answers

SOURCE: Mazda 3 front bumper knocked loose

It cant hurt to try to do it yourself, remember its already broke you cant break it any worse. YOU CAN DO IT !!!!!

Posted on May 14, 2010

Ad
  • 142 Answers

SOURCE: Need diagram for Mazda b4000 brake drum assembly

Okay, then you have what you need. Just take the drum off of the other side and use it as a reference. You are going to have a hard time trying to find a diagram. The Hayes and others are just general pictures and not necessarily what is on your specific vehicle. I do not have that particular diagram myself.
Please remember to rate this fix.

Posted on Feb 13, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

How do I change the entire headlight assembly on a 2008 Mazda CX 9.


There are a few installation bolts that are accessible from the top and side but you will need to remove the entire front bumper to access two of the lower ones. Here are some pics from the factory manual. First shows location of the headlight bolts and fasteners. Others show how to remove the bumper. 10mm socket should handle all the bolts you need to remove. Disconnect the battery prior to starting and headlights off. HID headlight voltage is around 25,000 volts so you want to ensure no power to the system before performing repairs.
25934749-fb0dbpuz0qoml01jiatehqdr-5-0.jpg

25934749-fb0dbpuz0qoml01jiatehqdr-5-2.jpg

25934749-fb0dbpuz0qoml01jiatehqdr-5-5.jpg

Oct 31, 2015 | 2008 Mazda Cx 9

1 Answer

How do I change the entire headlight assembly


Replacement of the headlamp assemble will require the removal of the front bumper to gain access to some of the attaching bolts.

Oct 31, 2015 | 2008 Mazda Cx 9

1 Answer

Assembly diagram parts


old post
ever try the FSM>? buy one, or read alldata.com
or try GM.? (aka. Geo snake skins)

mygod. there it is

http://www.gmpartsdepartment.com/parts/1993/Geo/Metro/XFi?siteid=214533&vehicleid=175790&diagram=HC89313&diagramCallOut=3

just one click and GM an magic happens. parts.

Apr 19, 2014 | 1996 Geo Metro

1 Answer

How to remove bumper


1. Remove rear combination light assembly. A. Remove two mounting screws. B. Disconnect electrical connector from rear side of light assembly.

2. Remove bumper assembly. A. Remove four fasteners and four retaining screws from top of bumper assembly. B. Remove mud flap from bumper assembly. C. Remove two screws from bottom of bumper assembly. D. Remove two screws from side of bumper assembly. E. Remove four bumper mounting bolts from under of vehicle.
3. Install rear bumper in reverse order of removal.

Dec 22, 2013 | 2004 Kia Sedona

1 Answer

Mazda3 underhood fuse diagram


On this website you find fuse box diagram and description for Mazda 3 (2008)

Mazda 3 2008 fuse box diagram Auto Genius

Jul 10, 2012 | Mazda 3 Cars & Trucks

2 Answers

How to remove 2008 toyota yaris rear bumper


Go to this site. http://www.yarisworld.com/forums/showthread.php?t=33767

Further down you will see a diagram of the bumper removal.

remove the two bolts under the hatch, the four plugs along the bottom edge, and the plate light. Don't forget the red circle clip or bolt on the diagram. Then you just pull it off.

Nov 30, 2011 | Toyota Cars & Trucks

1 Answer

WERE CAN I GET A DIAGRAM SHOWING THE FASTENING LOCATIONS FOR 2008 HYUNDIA ACCENT HATCHBACK REAR BUMPER COVER


Hello mbrown2331,

Below is an image showing the rear bumper assembly and it's fastener location.

netvan_119.png

I hope this helps.

Regards,

netvan

Jul 23, 2011 | Hyundai Accent Cars & Trucks

1 Answer

How to remove the rear bumper on a 2005 Kia Sedona


1. Remove rear combination light assembly. A. Remove two mounting screws. B. Disconnect electrical connector from rear side of light assembly. bs6d007a.gif 2. Remove bumper assembly. A. Remove four fasteners and four retaining screws from top of bumper assembly. bs6d007d.gif B. Remove mud flap from bumper assembly. C. Remove two screws from bottom of bumper assembly. bs6d007e.gif D. Remove two screws from side of bumper assembly. bs6d007b.gif E. Remove four bumper mounting bolts from under of vehicle. bs6d007c.gif 3. Install rear bumper in reverse order of removal.

Nov 09, 2009 | 2005 Kia Sedona

1 Answer

Rear bumper on mazda mpv


Removal of the rear bumper on an Mazda 2004 to 2006 MPV.
It's afairly simple task: 1) Open the rear hatch or (door) remove the torx screws at the bottom of the weather strip. 2) Remove both tail lights by unscrewing the two phillip screws on each light, once removed the lights pulling toward the side of the van. Let them hang from the wires. You will see a clip (white in color),pry it out from behind the bumper material and go to the next step. 3) Remove three 8mm head screws in each fender well and three plastic clips. Then remove an 8mm screw at the top corner of the bumper against the rear fender. If your car has splash guards remove them as well. 4) Remove the two clips at the bottom of the bumper attached to the under carriage. 5) Pull the bumper toward the back of the vehicle be careful with the tail lights. Remember, they are hanging loose.
And that's it, you have done it.
Ferni

Oct 07, 2008 | 2005 Mazda MPV

Not finding what you are looking for?
2008 Mazda 3 Logo

Related Topics:

93 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts

yadayada
yadayada

Level 3 Expert

76109 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22156 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

8270 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...