Question about Cars & Trucks

Open Question

How to remove the steering column on a 2003 kia rio

I need to remove the steering column on my 2003 kia rio in order to get to the clutch cable bracket on the pedal. it has broken off.

Posted by Anonymous on

Ad

3 Suggested Answers

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.
Goodluck!

Posted on Jan 02, 2017

Ad
  • 1 Answer

SOURCE: gday how do you remove the clutch pedal assembly

You will have to go to the junk yard and buy the Brake and clutch assembly unit that goes under the dash about 8 nuts hold it on I am working on the same problem with my 2001 model

Posted on Dec 04, 2010

Ad
Zim1308
  • 543 Answers

SOURCE: Hey im exchanging the clutch

Yes, this would help you greatly. As it kind of goed around the steering joint. There are 2, 12mm bolts loosen them up and be sure the wheels are pointed forward before undoing them as this will misalign ypur steering. Then you should be able to slide the rag joint up or down to diconmect the steering and get the pedal assembly past it to fnish the installment.

Posted on Jun 20, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2003 Kia Rio want start because of anti theft system code


It has to do with your Pat's key for your program key that went with the old steering column there is a copper ring or like a wire type ring that went around the key cylinder on your old column I think you needed to switch that to the new column not just the key cylinder but the little plastic ring with a wire hook to it that goes around the key cylinder this will match your old key

Aug 19, 2016 | Kia Cars & Trucks

1 Answer

How do I replace the clutch cable on a 2003 Kia Rio?


they are really easy to do the end just goes into a little hole then it just goes agains the stop inside the hole they are really easy to do , look on youtube you may find your answer there

Jan 19, 2015 | 2003 Kia Rio

2 Answers

Why does my 2003 Kia Rio have hard time going into 1st, 2nd, & sometimes reverse? Unless I press REALLY ******* clutch.


The clutch system in the Kia rios of those years are clutch cables, not hydraulic. There is no need for clutch fluid. Have a mechanic look at your clutch cable tension.
If it turns out to be a tranny prob thank Korea for building cheap cars.

Jun 29, 2014 | 2003 Kia Rio

1 Answer

Horn circuit for kia rio 2003


It is unlikely the horn is the problem. We do not have a circuit diagram but here is what I do have:

HORN TRIGGER (-) LT.GREEN/RED Harness Coming From Steering Wheel At
Steering Column, when the horn button is pushed this should be a ground circuit.

Jun 28, 2012 | 2003 Kia Rio

1 Answer

2007 kia rio5 is hard to shift into reverse and 1st


this might be because of the rpm of the engine being high when the car is stationary.
or your clutch might needs replacing..

what you can do is try to adjust the clutch manually,
you can do this by getting under the steering column,you will see the clutch pedal,there will be a screw at the top of the pedal where it is hinged at the body. try tightening that to see weather your problem goes away...

Oct 25, 2011 | 2002 Kia Rio

1 Answer

Removed steering column to access clutch cable, when put back into place, only half of the power has returned and the car wont start. Anyone? 2001 Kia Rio


did you replace the cable or did it come loose? are you sure your talking about the clutch cable for shifting the gears or the rod for the clutch master cylinder under the dash?

Jul 13, 2011 | 2002 Kia Rio

1 Answer

2003 Kia Rio manual transmission, stick is stiff g...


I would check the operation of the shifter cable. It may need lubricated.

May 20, 2010 | 2002 Kia Sedona

1 Answer

2002 Sedona: 2003 Kia Rio manual transmission, stick is stiff g...


I have the same car, the only solution to this problem is to tighten the clutch cable nut just as necessary until you feel that you are able to shift smoothly without forcing it, make sure you start the car to test for that.

You might have to remove the air intake in order to access the clutch cable.

If you tighten the nut too much, your clutch will feel light and you will have clutch slips. So basically keep trying until you're there. You can loosen or tighten the nut while the car is running, I'd recommend.

Source: Experience.

May 18, 2010 | 2002 Kia Sedona

1 Answer

Cruise control and horn stopped working


You need a new clockspring. It is behind the steering wheel, at the top of the steering column. It has wires wound around it like a clock. You will need to disconnect the battery, remove the air bag, then the steering wheel, and the steering column trim. Unbolt it, and install in reverse order.

Jun 18, 2009 | 2003 Kia Spectra

1 Answer

Kia rio turn signal stalk?


Yes that is the handle, that is refered to as the stalk or multifunction switch, it is always on the steering column.

Dec 29, 2008 | 2003 Kia Rio

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

38 people viewed this question

Ask a Question

Usually answered in minutes!

Top Cars & Trucks Experts

yadayada
yadayada

Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Randy Ohler

Level 3 Expert

14585 Answers

Are you a Car and Truck Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...