Question about 2006 Toyota Corolla

2 Answers

Engine check light on

2002 toyota camry(4cyl) engine check light on, read the code said emission control problem. Someone tell me change gas tank cap and it did not fix the broblem. I reset engine check lid, but when I run high speed 80mph, the engine check come on again? Thank you advance for your advices

Posted by on

  • 1 more comment 
  • adrianmarcog Jan 23, 2009

    i have the same problem, i woke up in the morning, turned my car on and then the check engine light came on, so i dont really know what the problem is, my car is a toyota corolla 2006 , i saw in the internet that is a problem in the CPU in toyota's cars from 2005 to 2007, could that be the problem?

  • Toyota Ed May 11, 2010

    What exactly was the code? If you were to tell us, we could assist you better. The light comes on for a variety of reasons.

  • Anonymous Mar 22, 2014

    My truck won't start and run. Have checked many of my parts. They all check out as good.

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

My '06 Corolla's CHECK ENGINE light came on the other day and then went out after about a half hour. It was back on this morning and stayed on, and I noticed that the automatic transmission was shifting a bit more roughly than it ever had before. Took the car to a Toyota dealership immediately. The guy told me that Toyota has had an ongoing problem with the CHECK ENGINE light coming on due to a faulty CPU (car's computer "brain"). This has been affecting models from '05, '06, and '07 according to him. He said Toyota had extended the warranty for this particular part (i.e. the CPU) due to it being faulty. The warranty expires once you reach 80,000 miles, and my car has 87,000 miles on it (yes, I do drive that much for my job!). But the guy at the dealership was kind enough to put in a new CPU for free because I have been a good, loyal customer there. The CHECK ENGINE light is now off and it should stay that way.

Posted on Jan 10, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

2002 toyota camry (4cyl) engine check light come on when I run high speed 80mph

Posted on Mar 07, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

P0441 what dose it mean and how can I fix it .toyota camery le 1998model


P0441 1998 Toyota Camry - Evaporative Emission Control System Incorrect Purge Flow

When is the code detected? Pressure in charcoal canister and fuel tank does not drop during purge control (2 trip detection logic).

Possible symptoms: - Engine Light ON (or Service Engine Soon Warning Light)
- Possible a noticeable fuel odor caused by the release of fuel vapors

P0441 1998 Toyota Camry Description: The Engine Control Module (ECM) tests the Evaporative Emission (EVAP) system for the following conditions:
- Large and small leaks

- Excess vacuum

- Purge flow during non-commanded conditions

- Fuel Level and Fuel Pressure sensor faults

- EVAP Purge and Vent Valve faults

The ECM monitors the Fuel Tank Pressure sensor in order to determine the level of vacuum/pressure in the EVAP system. The ECM commands both the EVAP Purge Solenoid and the EVAP Vent Valve ON when the conditions are met in order to apply an engine vacuum to the EVAP system. The ECM commands the EVAP Purge Solenoid OFF once the system has reached a predetermined level of vacuum. This test verifies if a vacuum can be achieved in the EVAP system. Failure to develop a vacuum may be caused by a large leak or a restriction.

P0441 1998 Toyota Camry Evaporative Emission Control System Incorrect...

Possible causes - Missing Fuel cap
- Incorrect fuel filler cap used
- Fuel filler cap remains open or fails to close
- Foreign matter caught in fuel filler cap
- Incorrect fuel tank vacuum relief valve
P0441 Toyota Evaporative Emission Control System Incorrect Purge Flow

Jun 01, 2015 | 1998 Toyota Camry

1 Answer

Evap emission system


Have same problem with my 2002 Silverado. Changed purge valve. Still no luck. There is a fitting for forcing smoke into fuel system to find leaks. I checked out a friends Trailblazer (same code) Someone stole his gas cap. Bad gas cap can also cause this code. You can ignore this code. It does not have any effect on engine performance, but if you have to pass emision test must be repaired

Apr 23, 2013 | 1998 Chevrolet Cavalier

1 Answer

Need to know what PO440, PO441, and PO446 codes mean for a 2000 Toyota Camry


p0440 is the evaporative emission control system p0441 is incorrect evap purge flow and p0446 is evap vent control circuit this means the charcaol canister is defective the only problem is they are in the rear of the car above the gas tank and they are metal when you gas up your car there are warning signs DO NOT TOP OFF TANK meaning when gas pump shuts off do not put in more gas ! reason being is the gas overflows into the metal canister and gets trapped and absorbs moisture , and you know what water does to metal .... rust ! no signal to solenoid = check engine light and codes sorry to say you are looking at about 600-700 dollars to fix

Aug 04, 2010 | 2000 Toyota Camry

3 Answers

Check engine light is on OBD codes are: P0401 P0440 P0441 P0446 Can I fix this myself? Diane


you hav egr valve problems n evap emissions flaws-ull need a repair manual if ur the mech-buy one at a parts place-clymer n haynes r the best

Sep 20, 2009 | 2000 Toyota Camry

2 Answers

2002 Buick Century, when the tank is 1/4 full,


P0446 Evaporative Emission Control System Vent Control Circuit Malfunction

The evaporative emission control system checks to make sure there are no leaks in the lines that run from the gas tank to the charcoal canister and up to the engine. It also checks to make sure the gas cap is sealing correctly.
It may just be that the cap was not on tight and the code was tripped.

A dusty environment can also clog the vent line and cause this code.
Have the code cleared and see if it comes back. Some auto parts stores like Auto Zone can read and clear the codes for you.
Hope this helps.

Sep 02, 2009 | 2002 Buick Century

2 Answers

I have a 2001 Sienna and havs the P0446 code. What


Evaporative emissions control vent circuit low http://wiki.answers.com/Q/What_does_OBDII_code_P0446_Evaporative_emissions_control_vent_circuit_low_mean


Jun 20, 2009 | 2002 Toyota Camry

1 Answer

Check engine light on on our 2000 toyota camry


If it was on for the gas cap the light will go out after about 5 days. Other wise have a part store read and clear your codes. (autozone)

Mar 14, 2009 | 2000 Toyota Camry

2 Answers

2003 toyota highlander OBD code's po442/po446/po441


if the air filter was recently inspected or changed, look for the vacuum hose to be disconnected from the valve located on the air filter cover. another source may be the gas cap either loose or with the tether strap caught under it preventing a proper seal

Dec 20, 2008 | 2003 Toyota Highlander

3 Answers

I got a problem with my toyota camry 1998


More often than not, the Vacuum Switching Valve for the EVAP has failed. This is assuming that alll of the vacuum lines are good, and there is no damage or cracks in any of the moulded plastic connectors under the tank. You need to go to a Toyota dealer & purchase the Evap VSV, part number 90910-12264; expect to pay about 50 dollars for the switch. You can't buy this switch at an auto retailer such as AutoZone; it's a dealer item only. Hope this helps, and the graciousness of a "FixYa" would be much appreciated. Thnaks for choosing FixYa!

Oct 23, 2008 | 2002 Toyota Camry

3 Answers

P0446 code


Ok code PO446 is your vehicles EVAPORATIVE EMISSIONS SYSTEM the most common cause is the gas cap gor left offf and someone drove the car or the cap was not fully locked it will set the code
the other causes are leaking evaporative emission plumbing from the fuel tank to the engine compartment, someone changed the fuel pump and did not seal it properly,
Failure of a emission component in the evap system
The only way to diagnost these is an OBDII scan tool and a smoke machine the light will come on when the computer does its test of the system and there is a hole as small as .020"
1/20,000 of an inch !
The light can only be turned off by a OBDII scan tool

if you found this information helpful please give me a good rating

www.aceautomotive1.com
If you need any additional help on this please contact me

Aug 14, 2008 | Toyota Avalon Cars & Trucks

Not finding what you are looking for?
2006 Toyota Corolla Logo

509 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...