Question about 1997 Honda Accord

1 Answer

Turn signals both went out at once

Signals click but do not flash on

Posted by on

  • dillon guay Oct 24, 2012

    need more info fast flash? or no flash?


1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points


    An expert that got 5 achievements.

    Vice President:

    An expert whose answer got voted for 100 times.


    An expert that has over 500 points.

  • Expert
  • 293 Answers

Burned bulbs? Try replacing them first.

Posted on Oct 24, 2012

1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

All turn signals went out at once

U may require a flasher unit.

Mar 18, 2013 | 2001 Kia Sportage

1 Answer

Both turn signals went out at once. Could it be a fuse?

flashing fast on dash? no flash? need more info

Oct 24, 2012 | 1997 Honda Accord

1 Answer

Turn signals went out on 1985 ford

replace turn signal switch under steering wheel.once steering wheel is removed you will see it

Jun 05, 2012 | 1985 Ford F150

1 Answer

No turn signal but emergency flashers work fine. fuses all good, relay replaced, multifunction switch replaced, still no turn signal.every once in a while can get it to flash once when turning the signal...

There's a turn signal module that creates the familiar click noise as it charges and discharges. You'll need to locate it and replace it. This is definitely the problem if neither the right nor left signals work but the flashers do.
That should be the part. If you already did this, it could be a wiring problem Does it only happen to one bulb? It's possible you have the wrong bulbs in or they are two filament bulbs and one filament has burned out as well.

Aug 31, 2011 | 1998 Ford Windstar

2 Answers

92 caprice classic turn signals not working, but the bulbs are fine. Hazards, brakes, etc all work fine. Any ideas?

Yes, the problem is the turn signal flasher is defective. You can has two flasher relays. One for the turn signals and one for the hazard lights. That is why the hazard lights flash and the turn signals do not. Replace the turn signal flasher relay located on the drivers side of the steering column, mounted behind the instrument cluster in the convenience center. They are both mounted in the same location so turn on the hazard lights and the one that you put your finger on that is not clicking is the turn signal relay.

Mar 08, 2011 | 1992 Chevrolet Caprice

1 Answer


make sure all the turn lights are working on your car. sometimes this is an indication of a burnt out bulb. you likely need to replace the flasher relay under the dash. if you have trouble locating it. turn on the turn signal that works and listen for it. once you know where the general location is put your finger on it and if it's clicking you have found the right relay.

Mar 01, 2011 | Buick Century Cars & Trucks

1 Answer

F450 Right Blinker blinking fast - Bulbs are fine

could be a short,but more than likely the bulb receptical has a worn contact so the receptical needs replaced.

Apr 29, 2010 | 1999 Ford Super Duty F 450

1 Answer

Turn signals not flashing on rear of my truck.

Remove the bulb and ensure a clean contact.

Aug 17, 2009 | 1997 Chevrolet Blazer

1 Answer

Where is the turn signal flasher located on a 1988 chevy ck 1500

Look under the dash for what looks like a fuse panel. I know that the actual fuse panel is under the cover(if you still have the cover!) next to the parking brake release. There is a turn signal flasher unit that plugs into this under dash panel, it is rectangular in shape, and it pulls straight out. Mine went bad as well, turn signal would only flash once or twice, then stay on. If you are having trouble locating it, turn key to "run" and put a finger on the under dash module in the panel I referred to, and turn on the turn signal with your other hand. You should feel the relay energize as a little click inside of it. Remember, it only pulls straight out, and I replaced mine from an Autozone store for about 10 bucks. Good luck!

Jan 11, 2009 | 1988 Chevrolet C1500

1 Answer

Turn Signal problem

2003 mini cooper . Went for a clean up,and came back with the righ turn signal on all the time. every thing else works fine when you turn left or 4 way flashers. Any help will be appriciated. Thanks in advance

Jul 30, 2008 | 2002 Mini Cooper

Not finding what you are looking for?
1997 Honda Accord Logo

Related Topics:

21 people viewed this question

Ask a Question

Usually answered in minutes!

Top Honda Experts


Level 3 Expert

75051 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22095 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7726 Answers

Are you a Honda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides