Question about Isuzu Rodeo

Open Question

Need spark plug wire diagram coming off the distributor for: 2002 Isuzu Rodeo 4 cyl. 2.2L

Posted by on

  • JUNITO9 Jan 02, 2009

    need a diagram for spark plug on a pontiac grand am 93 3.3 L

×

5 Suggested Answers

Richie_asg1
  • 1036 Answers

SOURCE: 1992 Isuzu Rodeo Distributor wires 3.1L engine

Hi,
Isuzu seem to have complicated things by changing engines, firing orders and even direction of rotation! As you can see, they've numbered the cylinders the other way than the 3.2L.

The Firing sequence for the 3.1 (traditional distributor) 6 cylinder is as follows -

d6e5b2a.jpg

If you take the distributor cap off, there should be a "No.1" formed on the inside. Stick a lead on this before you put the cap back on and go from there.
As leads are different lengths, you may have to swap a few to find the best fit.

I think 2 of them will look out of place - but that's the way it's designed. Just make use of clips for holding them neatly.

Thanks for using Fixya.









Posted on Jul 06, 2008

Richie_asg1
  • 1036 Answers

SOURCE: 1992 Isuzu Rodeo Distributor wires

Hi,

On the 3.2L distriburorless ignition, the firing order is a straight 1-2-3-4-5-6.

Cylinder numbering .

88c39f7.jpg-

Hope this works for you

Posted on Jul 05, 2008

lady_montana
  • 18 Answers

SOURCE: Isuzu Rodeo w/3.1L engine

Front Passenger side on cap is 1 - if you look on the inside of your cap there SHOULD be a pin marked with a 1, and the plugs go CLOCKWISE not counter. Just had the same problem myself with my 91 Rodeo. Cylinders are as follows Passenger side (front to back) 1 - 3 - 5, Driver side (front to back) 2 - 4 - 6. I called the Isuzu dealer and they told me it was counter clockwise, but when I hooked it up that way it backfired through the Carb.

Posted on Jul 19, 2008

fastboyz
  • 674 Answers

SOURCE: Distributor cap diagram, 2001 Ford Ranger 2.3L 4 cyl?

68d429b.jpghope

Posted on Nov 15, 2008

  • 233 Answers

SOURCE: where is the thermostat for a 2002 isuzu rodeo?

The thermostat is located at the end of the top radiator hose on engine.

Posted on Feb 15, 2010

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Multiple misfire on my 03 rodeo izusu. spark plugs and wires, coil pack,coolant sensor changed. Not sure what else there is I can do.Any one having the same issue ? Help


In brief, you need spark at the right time, fuel, and compression to have power.
You would need to know if you have all three on all cylinders.
This would include fuel injectors and engine valves.

Jan 30, 2013 | 2003 Isuzu Rodeo

1 Answer

How do we connect Isuzu rodeo 3.2L plug wire


FIRING ORDERS NOTE: To avoid confusion, remove and tag the spark plug wires one at a time, for replacement. If a distributor is not keyed for installation with only one orientation, it could have been removed previously and rewired. The resultant wiring would hold the correct firing order, but could change the relative placement of the plug towers in relation to the engine. For this reason it is imperative that you label all wires before disconnecting any of them. Also, before removal, compare the current wiring with the accompanying illustrations. If the current wiring does not match, make notes in your book to reflect how your engine is wired. Fig. 1: 1.8L, 2.0L and 2.3L engines Firing Order: 1–3–4–2 Distributor Rotation: Counterclockwise 86862g37.gif
Fig. 2: 2.6L and 2.8L engines Firing Order: 1–3–4–2 Distributor Rotation: Clockwise 86862g39.gif
Fig. 3: 3.1L engine Firing Order: 1–2–3–4–5–6 Distributor Rotation: Counterclockwise 86862g40.gif
Fig. 4: 3.2L engine Firing Order: 1–2–3–4–5–6 Distributorless Ignition System 86862g76.gif
prev.gif next.gif

Aug 27, 2010 | 1994 Isuzu Rodeo

1 Answer

Need wiring diagram for 1992 Izuzu Rodeo 6 cyclinder.


For the 1992 Isuzu Rodeo 3.1L V6:
Firing Order
:

1-2-3-4-5-6
Cylinders:
.....(back)
5...............6
3...............4
1...............2
Distributor:
.....(back)
..............(+)-screw
.........4
..3
...................5
2
.................6
........1
(+)-screw
.....(front)
Rotation: Clockwise

Let me know if this helped, or if you have additional information or questions. Feel Free to contact me at FixYa.com!

Aug 18, 2010 | 1992 Isuzu Rodeo

1 Answer

I looked throughout the manual, but it only shows a picture of the distributor cap, cannot find it on the engine


it should be 5 wires going to a cap. follow a rubber wire come frome the spark plug

May 22, 2009 | 2000 Isuzu Rodeo

1 Answer

Where is the distributor on a 1993 Isuzu Rodeo


At the opposite end of the wire where it connects to the sparkplug on a 4 cyl and V6. A 1993 V6 has a coil pack and is not called a distributor. Should be three delco coils.

Apr 11, 2009 | 1998 Isuzu Rodeo

2 Answers

Need wireing diagram for 2002 dodge grand caravan


------>>>FRONT>>>>of Van >>>>

______________________________
#5 cyl #6 cyl

#3 cyl #4 cyl

#1 cyl #2 cyl
______________________________
_________________
I COIL BLOCK I
I I
I #3 #1 #5 I
I I
I I Firing Order Is
I I 1 2 3 4 5 6
I #6 #4 #2 I
I _______________I_

the Wires Go Accordingly to prospective Terminals, So Sorry Unable to Send Pics through FixYa, A Formating Problem Exists
and they show on my end but not on your end this is TRUE and CORRECT To The BOOK other than the Lines from Coil to Spark Plug ENDS at CYLINDERS. Please dont Forget to RATE Me
Thank You And Happy Motoring!!



Mar 27, 2009 | 2002 Dodge Grand Caravan

1 Answer

1997 isuzu rodeo


The firing order for a six cylinder is 1-2-3-4-5-6 distributor rotation-clockwise...cylinders 1-3-5 on drivers side...2-4-6 on passenger side

Dec 18, 2008 | 1997 Isuzu Rodeo

1 Answer

Isuzu Rodeo w/3.1L engine


Front Passenger side on cap is 1 - if you look on the inside of your cap there SHOULD be a pin marked with a 1, and the plugs go CLOCKWISE not counter. Just had the same problem myself with my 91 Rodeo. Cylinders are as follows Passenger side (front to back) 1 - 3 - 5, Driver side (front to back) 2 - 4 - 6. I called the Isuzu dealer and they told me it was counter clockwise, but when I hooked it up that way it backfired through the Carb.

Jul 05, 2008 | 1992 Isuzu Rodeo

1 Answer

1992 Isuzu Rodeo Distributor wires


Hi,

On the 3.2L distriburorless ignition, the firing order is a straight 1-2-3-4-5-6.

Cylinder numbering .

88c39f7.jpg-

Hope this works for you

Jul 05, 2008 | 1992 Isuzu Rodeo

Not finding what you are looking for?
Cars & Trucks Logo

Related Topics:

744 people viewed this question

Ask a Question

Usually answered in minutes!

Top Isuzu Experts

yadayada
yadayada

Level 3 Expert

63242 Answers

Steve Hurc
Steve Hurc

Level 3 Expert

450 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Are you an Isuzu Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...