While driving along my abs will suddenley kick in even in the dry which is causing the abs light to come on
SOURCE: abs kicks in at low speed and pedal pressure
You have a weak or bad ABS sensor on one of the hubs. They are built into the hub and are not individually replaceable. Also rust buildup around the sensor will cause this same problem. To stop the ABS from kicking in untill repair just pull the fuse.
bad sencor i would live with it cost to much to fix and abs is still working prop
SOURCE: 1997 Saab 9000 weird ABS problems:
have car scanned auto zone -advanced auto and some other auto stores will do this for free most likely one of your sensors is starting to go bad usually will activate at low speed under 10 mph as ur slowing down do check this problem early as abs can cause vehicle to stop longer
SOURCE: 1998 GMC 1500 4x4 4.3L ABS brake problems
Or you could just pull the fuse for the abs and not have abs but you won't wreck from pulsating pedal.
SOURCE: ABS Problem in my 2000 Jimmy 4x4
the best way to diagnose this problem would be with a scan tool while driving and watching the speed sensors, or check all your wheel tone rings make sure there are no cracks and they are clean, also have the computer scaned for abs codes there should be a code that may tell you which wheel speed sensor is acting up,you can also check the wiring, these seem to chaf the wiring by the control arm .a bad wheel bearing may also cause this problem, i would start with a scan of the abs system,good luck.
127 views
Usually answered in minutes!
×