Question about 2005 Mazda 3

2 Answers

2004 mazda 3 headlights wont work

All of the lights but the low beams will not work and I do not know why.

Posted by on

  • 3 more comments 
  • Anonymous Jan 15, 2009

    I have a 2004 Mazda 3 and just tonight the same issue. The Low-Beams are not working however the High-beans do along with the fog lamps. Please reply if you know how to fix this issue.

  • Anonymous Jan 15, 2009

    I have a 2004 Mazda 3 and just as of tonight my Low-beam lamps don't work. I do have High-beams. The fog lamps do work as well as the other lights on the car. Please reply if you have an suggestions on what to look for or do.

  • Anonymous May 07, 2009

    Same issue for me. Both low beam lights failed simultaneously as far as I can tell. I suspect the alternator/voltage regulator may be applying too high a voltage to the lights. Mine is a 2004 Mazda 3.

  • undesiredone May 09, 2009

    i have a 2004 mazda 6 and i have the same prob...i replaced me low beams with xenons and they worked for a few days, and then they kinda sucks cuz i only have my fog lights to drive with...any one kno the prob? fuses are good and ive bought brand new bulbs tons of times. im lost

  • gailnichols
    gailnichols Feb 03, 2013

    the same for my 2005 Mazda all the lights work except the low beams and for the first time I replaced them about 18 months ago. Looks like this might be recall item because I have read several of the same questions on the internet.



2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I just noticed that my low beams are out and the only thing working is the right front high beam for light so i can see at night. I bought new bulbls and replaced them. I bought new fuse's and replaced them too. i checked the wires to see if i was getting any voltage and the multi-meter only read 1 and now i am so lost i dont know what to do.

Posted on Dec 16, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 2 Answers

I don't mean to sound like an idiot - but did you try replacing the bulbs? It is possible for them to go out at the same time, since they are PUT IN at the same time!

Also, you could have been driving around with one of them out for some time before you noticed it and now the other is out too. I only say this, since I have been doing the same thing. I have no idea how long the bulb has been out becaus ther only reason I noticed it was out was because I pulled into a building with a glass front!

It is recommended that you buy two new bulbs at a time, anyway when you replace them...

I hope that's all it is! good luck both o'yahz!

Posted on Feb 01, 2009


1 Suggested Answer

  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

a 6ya expert can help you resolve that issue over the phone in a minute or two.
Best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of.(from cars to computers, handyman, and even drones)
click here to download the app (for users in the US for now) and get all the help you need.

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%


Complete. Click "Add" to insert your video. Add



Related Questions:

1 Answer

Passenger low beam won't light. New bulb did not help, fuses are good. What else can I check ?

low beam won't light Richard, faulty bulb socket module or wires, check and repair.
Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."

How to Fix Low Beam Headlight

Low beam headlights out High beam working

High beams ok but not low beam one side only TDIClub Forums

Mar 06, 2016 | 2011 Mazda CX-9

1 Answer

Both my low beam and high beam wont work. And my headlights wont go down even when lights are turned off and the button is unpressed on the inside.

check the headlight relays ,
Check for possible faulty light stalk switch also. Dash lights may fail with this possible cause.
Check fuses

Jan 25, 2016 | 1992 Mazda MX-5

1 Answer

I have a 2008 Mazda 5 minivan how do I change the headlight bulb

Headlight Change 2006-2010 Mazda 5 - CarCareKiosk
This free video shows how to change a burnt out headlight on a 2009 Mazda 5 Sport 2.3L 4 Cyl.. Complete instructions for replacing a head light bulb on a 2009 ...

Low beam head light bulb replace 2000-2006 Mazda Mpv ...

? 5:11
Jun 29, 2013 - Uploaded by hp11208
Low beam head light bulb replace 2000-2006 Mazda Mpv .... My step dad and I successfully replaced a headlight yesterday! :-) ...I've lost it trying to replace the bulb. if anyone can let me know I would really appriciate it thanks ! ..... 5:00. Cleaning your IAC to fix rough idle on 2000 or 2001 Mazda MPV ...

Nov 29, 2015 | Mazda Cars & Trucks

1 Answer

Headlights do not work high or low beam all other lights work

Re: Condensation in Sienna Right Headlight.... - Toyota Sienna Forum
Mar 10, 2009 - 15 posts - ‎9 authors Over the years, I was not a frequent visitor to SiennaClub...but when I did visit, it was... in the right, passenger-side xenon HID headlight of my 2004 Sienna...the light has... Check with your dealer and see if they can do anything about it. .... :o The HID bulb is also a PITA to remove because you are working ... Re: 2004 Sienna no brake lights, radio, heater/AC ...
15 posts
Jan 4, 2013
Thread: HELP: Both Low Beams don't Work
6 posts
Nov 27, 2011
Thread: 2000 sienna drl and/or headlight issue
5 posts
May 7, 2010
Automatic Headlight Option: Useful or Not?
8 posts
Mar 3, 2010
More results from

Toyota 2004 Sienna repair: Replacing HID ballast or ...
May 1, 2010 - Replacing HID ballast or computer control lighting for the Headlight. Just got a ... Up until now, I did not know I had the option of seeing twice as far with Xenon. Also up to ... In the end after buttoning everything up, the light did work fine. .... Howdo you determine if you have a HID or non-HID light? Reply ...

Oct 15, 2015 | 2004 Toyota Sienna

1 Answer

One of my turn signals wont work, both my headlights only work on highbeams

replace the high beam switch which causes this problem. Also clean the terminals for the directional light bulb. That will cause a negative continuity to the bulb

Sep 01, 2012 | 1996 Mazda MX-5 Miata

1 Answer

Low beams on 2004 chevy trailblazer wont work but high beams work fine.lights all work automaticly

Try changing the bulbs. No. They didn't both burn out at once. You probably drove for a while with one headlight, and didn't know it.

Oct 26, 2011 | 2004 Chevrolet TrailBlazer

1 Answer

Both low beam headlights are out. Don't know if

Could be the dimmer switch. Probably located near the base of the steering column and activated by a long rod from the lever.

Feb 06, 2010 | 2004 Mazda 6

Not finding what you are looking for?
2005 Mazda 3 Logo

1,668 people viewed this question

Ask a Question

Usually answered in minutes!

Top Mazda Experts


Level 3 Expert

76846 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22246 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8575 Answers

Are you a Mazda Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides