Question about 2003 Hyundai Santa Fe

Open Question

ABS Traction Control light stuck on

I have a 2003 Hyundai Santa Fe. The car was in a front end collision. The shop has repaired it but is perplexed by the traction control and ABS light staying on. Do you have an idea of what may be the cause of this? Would it be related to the accident?

Posted by on

  • 1rockc Jan 21, 2009

    new disk, new brake pad and light and ABS and Brake light stuck on.



    Do I need to reset something?

×

6 Suggested Answers

  • 1 Answer

SOURCE: HI 2oo1 hyundai sante fe .abs and traction light on , when i am going up a hill there is a humming type noise coming from engine and my brakes dont connect right away .sounds like its coming from mast

Hi. My girlfriend has the veh. and problem.. Me being a mechanic.. I checked all abs sensors and cleaned them of brake dust. I had found that there is a recall on this problem..What it is hyundai had put the abs ans traction control together,and if the tires start to spin the abs kicks in and helps get traction..Here is the problem.. when the brakes pads get wet there is alittle slip of rotor and pad which causes the light to come on,also when applying the brake at low speeds...What I had done was get the best rotors and pads,and that is helping

Posted on May 10, 2009

ghost4548
  • 776 Answers

SOURCE: My 2003 Hyundai Santa Fe ABS light is staying on

Here are all the possible problems which can turn on your ABS light.

C1101 Battery voltage over volt: 18V or more ○ ○ BR - 69
C1102 Battery voltage low volt: 9.5V or less ○ ○ BR - 69
C1200 FL wheel sensor: open or short to ground ○ ○ BR - 66
C1201 - Range/Performance: speed jump or damaged exciter ○ ○ BR - 67
C1202 - No signal: air-gap error or wrong excite ○ ○ BR - 68
C1203 FR wheel sensor: open or short to ground ○ ○ BR - 66
C1204 - Range/Performance: speed jump or damaged exciter ○ ○ BR - 67
C1205 - No signal excite: air-gap error or wrong excite ○ ○ BR - 68
C1206 RL wheel sensor: open or short to ground ○ ○ BR - 66
C1207 - Range/Performance: speed jump or damaged exciter ○ ○ BR - 67
C1208 - No signal excite: air-gap error or wrong excite ○ ○ BR - 68
C1209 RR wheel sensor: open or short to ground ○ ○ BR - 66
C1210 - Range/Performance: speed jump or damaged exciter ○ ○ BR - 67
C1211 No signal: air-gap error or wrong excite ○ ○ BR - 68
C1604 ECU hardware: ECU internal or valve failure ○ ○ BR - 70
C2112 Valve relay: valve relay or fuse failure ○ ○ BR - 70
C2402 Motor-Electrical: open or short to battery, motor relay, fuse or motor lock fail ○ ○ BR - 71
C1503 TCS switch failure δ ○
C1605 CAN Hardware failure δ ○ BR - 71
C1610 CAN Bus off failure δ ○ BR - 71
C1611 EMS Time-out failure δ ○ BR - 71
C1612 TCM Time-out failure δ ○ BR - 71
C1613 TCM Un-matching failure δ ○ BR - 71
C2227 Brake disc overheat δ ○
C1274 G-Sensor signal fail (only 4WD) ○ ○ BR - 72
C1275 G-Sensor open or short to ground (only 4WD) ○ ○ BR - 72
You'll need a scanner which is compatible with Hyundai's ABS system to retrieve any DTC's (Diagnostic Trouble Codes) stored in its computer. Any time the ABS light comes on, there's a DTC stored in its computer - that code will tell you where the problem exists. Then you can go from there.

Posted on Jun 20, 2009

rteemon
  • 578 Answers

SOURCE: Is there a way To Disable Traction Control on 2006

you could unplug but you ecu may should

Posted on Jul 01, 2009

  • 148 Answers

SOURCE: 2003 Hyundai Santa Fe ABS light is on along with TCS light

you may have damaged the ABS sensor or wire to the sensor up front check the wire that runs from the inner finder well and make sure it connected to the ABS sensor on the spindle

Posted on Jul 15, 2009

SOURCE: I have a 05' Hyundai Santa Fe.The ABS light & TCS light.

dear friend-it sounds like one of the sensors(wheel)is faulty or one pne of the turnwheels came loose.

Posted on Jul 27, 2009

MNfisherman
  • 11896 Answers

SOURCE: 2003 Hyundai Santa Fe 47,500 mi Check Engine light

This would be a faulty EGR valve.

Posted on Sep 16, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

07 santa fe esc light is on. how to repair


https://www.hyundaitechinfo.com/ make an account, its free, logon and look for your model, this site has everything

Feb 19, 2015 | 2007 Hyundai Santa Fe

1 Answer

What does TCS mean


Traction Control System---part of ABS Braking System

Jul 27, 2014 | 2003 Hyundai Santa Fe

1 Answer

Have a 2004 impala 3.8 front end collision repaired it and the abs and traction light stays on ?


was it like this before the accident and repair? take it back to the repair shop. something is unpluged or incorect part.

Nov 19, 2010 | 2005 Chevrolet Impala

1 Answer

Recently had my 2003 Hyundai Santa Fe on a rack to check tire problems. Spun the tires up in DRIVE to check roundness. Afterward the ABS and TCS OFF light came on and will not go off. Did running all 4...


the traction control uses a mechanism that if it senses that your tires are spinning it will automatically set your ABS to reduce the spin and give you more traction. you should have had the TCS off before you raised it up bbut i think you should look in your manual for a way to reset it if not you may have to take it to the dealership and have them reset it for you. hopefully you didn't damage the traction control sensor

Mar 05, 2010 | 2003 Hyundai Santa Fe

1 Answer

Traction control not working


the most common problem i find with abs are faulty abs readings a bad bearing or external ring gear is chipped or cracked. it uses magnets to read a steel ring gear no thicker than a quarter inch so a slight disturbance can throw it off a visual inspection of the gears could shed light on your problem also traction control is part of your abs so thats why they came on together but you should know these are only typical it is possible you have a bad abs module hopefully not but still possible(though unlikely) hope this helps good luck

Feb 27, 2010 | 2004 Hyundai Santa Fe

2 Answers

2001 Hyundai Santa Fe check engine light and transmision troubles


your guess is as good as anyones. Someone will have to look at this in person.

Nov 18, 2009 | 2001 Hyundai Santa Fe

2 Answers

2003 Hyundai Santa Fe ABS light is on along with TCS light


you may have damaged the ABS sensor or wire to the sensor up front check the wire that runs from the inner finder well and make sure it connected to the ABS sensor on the spindle

Jul 14, 2009 | 2003 Hyundai Santa Fe

4 Answers

2001 Hyundai Santa Fe - Engine Code P1602, stuck in gear


Im having the same problem with my 02 Santa Fe. How do i go about fixing this problem? And is it costly? Please help

May 20, 2009 | 2001 Hyundai Santa Fe

1 Answer

Abs brake light stays on


There is no ABS brake light. Take the vehicle back to whatever service center/garage did the brake work and tell them to fix it.

Apr 05, 2009 | 2003 Hyundai Santa Fe

1 Answer

02 santa fe tcs & abs lights on


haynes has one id try bleeding the brakes or replace them an bleed

Aug 10, 2008 | 2004 Hyundai Santa Fe

Not finding what you are looking for?
2003 Hyundai Santa Fe Logo

Related Topics:

260 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

yadayada
yadayada

Level 3 Expert

60960 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...