Question about 1998 Ford Ranger SuperCab

2 Answers

One coil wont fire 1994 ford ranger 2.3 liter

1994 ford ranger 2.3 liter has 2 coil packs and 8 plugs the intake coil wont fire and have replaced it and plugs and wires

Posted by on

  • 1 more comment 
  • Anonymous Jan 22, 2009

    I have already changed the pickup on the crankshaft but the exhaust side coil still fires weak 1&4 on the intake side fires perfect

  • CoryJoeSr May 11, 2010

    Compression test, how did you verify the no fire condition?

  • Angelo Attard
    Angelo Attard May 11, 2010

    you need to do a compression test and check for vaccum leaks on the intake on the cylinder thats not working a vac hose may of come off

×

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 141 Answers

Crank sensor or cam sensor

Posted on Feb 15, 2009

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Ignition control mod is bad

Posted on Jan 09, 2013

3 Suggested Answers

bschilz
  • 2049 Answers

SOURCE: Firing order for Spark Plug wires

Here is the diagram you ask for. While it says it is for the 3.0L V6, it is the same for the 4.0L V6 if that's what you have...


2627ab5.jpg

Posted on Feb 15, 2010

alicantecoli
  • 21949 Answers

SOURCE: 2001 ford windstar-new coil pack,new spark plugs

head gasket?? blowing between two cylinders

Posted on Mar 19, 2010

ZJLimited
  • 17970 Answers

SOURCE: need ford ranger 1990 engine

For 1990 Ford Ranger 2.9 liter V-6 VIN "T" check the next firing diagram...


zjlimited_403.gif


Hope this helps (remember to rate and comment this free answer)

Posted on May 31, 2011

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Both coils do not fire on 1 and 4. Will start but only running on 2 cylinders. Could both coils be bad or should I look elsewhere?


Part 3 -How to Test the Ignition Module and Crank Sensor ...

easyautodiagnostics.com > Ford > 2.3L
Mar 1, 2012 - Spark plugs for cylinders #2 and #3 get spark at the exact same time. ...voltage -12 Volts) to both individual ignition coils within the coil pack. ... Ford Mustang or Ranger (or 2.3L Mazda B2300), this is what you'll need ... for this 'Switching Signal' at the coil pack... but you can also test this ... 1991, 1992, 1993.

How to Diagnose a Misfiring Cylinder (2.3L Ford Ranger ...

troubleshootmyvehicle.com > Ford > 2.3L
Apr 3, 2012 - Bad Fuel Injectors can cause a Misfire Condition. ... the ignition system on the 2.3L Ford Mustang or Ranger consists of 2 ignition coil packs, ...

2002 ranger misfire rough idle - Discussion on Topix

www.topix.com > Ford Ranger
Jul 27, 2007 - My truck is giving the code misfire in number 4 cyl. I replaced my spark plugs, Wires, Coil packs (both of them) and all my fuil ... three (3.0L v6) go bad, the fuel/air mixture gets messed up. Judged: 2. 2 ... My truck runs rough only at idle. ...code for ford ranger 2002, 2.3 5speed. truck runs like a champ but that ...

Extremely stumped! I need the best and brightest 1994 Ford ...

answers.edmunds.com > Edmunds Answers

Jan 31, 2016 | Cars & Trucks

1 Answer

1997 Ranchero Outback, 4.0i inline 6 engine. Where can I get color coded diagram?


diagram showing spark plug wires to Coil pack? - Ford Truck ...

www.ford-trucks.com > ... > Small Chassis Trucks > Aerostar
Apr 8, 2014 - now I cannot find a diagram for the Driver's Side wire positions at the Coil... (the Passenger side wires are 1-2-3, starting from the front of the engine, simple enough); The Coil pack ... But the Driver's Side wires are not in a Sequence of 4-5-6, instead ... 1997 Ford Aerostar 4.0L RWD (purchased May 2012) Camshaft Position Sensor (CMP) wiring pigtail replacement
May 8, 2012
Help! 1994 4.0L Ranger misfiring & hesitating under load?
Oct 31, 2011
1994 F150 starter wires
Jul 16, 2011
Coolant Loss - 4.0L OHV Lower Intake Gasket
Apr 21, 2004
More results from www.ford-trucks.com

Sep 30, 2015 | Ford Cars & Trucks

3 Answers

Need firing order diagram for a 5.4 ford expedition


Check this diagram for 2003 Ford Expedition 4WD 5.4 liter SOHC V-8 VIN "L"...

4867d57.gif

Hope helps (remember rated this help).

Jul 05, 2010 | 2003 Ford Expedition

1 Answer

Truck not firing properly front coil pack not firing at all.


if this truck has an o2 sensor i would replace that and also make sure the cat-converter is not plugged,this would give you your powerloss and egr code,next is your coil,this may be caused by the computer or your crank sensor,look at the tone ring that the crank sensor uses and make sure its not missing teeth or broken,also check all your fuses.

Jun 12, 2010 | 1994 Ford Ranger Supercab

5 Answers

What is the firing order for a 1996 ford F 150


1996 Ford F 150 2WD Pickup
4.9 liter L6
8fb483c.gif

1996 Ford F 150 2WD Pickup
5.0 liter V-8
7da3b1b.gif
1996 Ford F 150 2WD Pickup
5.8 liter V-8
0e32d26.gif

Jan 25, 2010 | 1996 Ford F150 Regular Cab

1 Answer

1986 ford ranger 2.9 liter 2 wheel drive


youll have to see if your coil is firing

Feb 07, 2009 | 1986 Ford Ranger 2WD

Not finding what you are looking for?
1998 Ford Ranger SuperCab Logo

Related Topics:

1,683 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...