Question about 2000 Chevrolet Silverado

3 Answers

Will not come out of tow/haul mode

Recently, my 2000 Z71 4WD went into Tow/haul mode and will not clear. It did clear on it's own while driving approx 60 MPH but and
stayed off until the next day.
The following morning it showed it was back in tow/haul again and
will not clear. That was about a week ago.
A mechanic friend suggested removing battery cable for 10 minutes
for the computer to re-set.
I tried that yesterday for approx 20 minutes and it still won't clear.
Thanks for any assistance.

Posted by on

  • MDUSER Jan 23, 2009

    I TOO HAVE THIS SAME PROBLEM. ,BUT NO,IT'SNOT THE WIRE ON THE SHIFT COLUM.

×

3 Answers

  • Level 1:

    An expert who has achieved level 1.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 7 Answers

My problem was that it would keep turning on and off. i found that the wires at the shifter broke under the boot so i put them back together and electric taped them no i didnt solder them cause i wanted it flexable so it wouldnt short cause of them being too stiff

Posted on Sep 02, 2012

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

Rating: 95%

Posted on Feb 21, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 58 Answers

It's the little wires that come out at the bottom of the shift handle inside the steering column cover. The wires usually break and in your situation maybe pinched together.

Posted on Jan 04, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

What would cause my TAHOE TOW/HAUL mode to engage on its own?


You need to have a diagnostic scan tool hooked up ,glitch in one of the control modules or a wire in the circuit shorting to ground ! probably something simple but hard to find ! With a factory scan tool they can check the input signal to the BCM ,PCM .
Tow/Haul mode enables the operator to achieve enhanced shift performance when towing or hauling a load. When tow/haul mode is selected, the tow/haul switch input signal to the body control module (BCM) is momentarily toggled to zero volts. This signals the powertrain control module (PCM) or transmission control module (TCM) to extend the length of time between upshifts and increase transmission line pressure. Cycling the tow/haul switch again, or cycling the ignition switch disables tow/haul mode and returns the transmission to a normal shift pattern.

Sep 23, 2015 | Cars & Trucks

1 Answer

2004 ford f250 superduty 6.0L dsl tow haul light flashing and doesnt want to go into reverse


That light means that the shift points have changed on the transmission. This is to get better economy when hauling. If it wont stop flashing then there is a valve in the transmission that is bad or sticking. You will have to have it removed and overhauled..

Dec 12, 2013 | 2003 Ford F350 Super Duty DRW SuperCab

1 Answer

TOW/HAUL Indicator Light jeep cherokee 2005


Th e tow haul button is so if your towing a heavy trailer its easier on the tranny when you hit the button you generally dont need to use it for everyday regular driving.

Apr 15, 2013 | 2005 Jeep Grand Cherokee

1 Answer

I have a 2004 tahoe and this light came on i don't


That is the Tow/Haul indicator. Button on the end of shift selector was most likely depressed during shift or possibly a malfunction with the tow/haul mode selection system. (IE: Tow/Haul button)

Jan 14, 2013 | Cars & Trucks

4 Answers

Tow/haul does not work on 2000 chevy truck. whereis fuse?


I had a problem with my tow/haul button not working. I came to find out that the gear shift had cut the wire running to the button in two. You may want to check that.

May 05, 2009 | 1999 Chevrolet Silverado 1500

1 Answer

Tow/haul light wont turn off


I have found that on three silverado's there is a plastic clamp on the bottom side of steering column where the wires become broken and can short out. You have to remove the column covers to see this, it should be claser to the lowe dash trim panel area needs a shifter to repair unless you can fix that little wire!

Apr 05, 2009 | 2000 GMC Sierra

1 Answer

Towing


tow in tow/haul and use 4x4 when necessary..it is how the truck is designed ..... :) have a good day

Nov 12, 2008 | 2000 GMC New Sierra 1500

2 Answers

Transmission tow/haul mode


Hi, the problem is when you are tilting the steering wheel all the way up it's putting to much tenstion on the wires that come outof your shifter that run to the tow/haul button. i am 99% sure your wires are disconected. rewire them and add some extra wire so next time there will be more slack in your wires.

Jul 20, 2008 | 2001 Chevrolet Silverado 2500HD

Not finding what you are looking for?
2000 Chevrolet Silverado Logo

526 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6878 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...