Question about 1990 Ford Bronco

1 Answer

Transmission bronco 90'

I have a bronco Eddie Bauer 1990 8Cyl 5.0L
As i was driving last night i heard a loud noise, wasn't sure if i catched a big hole on the road or what, but two minutes later i realize that the automatic transmission wasn't shifting pass second gear.
Any info of what could it be? is this common in an old bronco to break from a minute to the other?
Is it necesary to replace the entire transmission? and if so how much could it be for part and labor?
THANK YOU IN ADVANCE
Carla

Posted by on

  • cbubica Jan 02, 2009

    I'm in south Florida, Miami. Prices here can vary a lot from one place to another. Rebuilt ah?! better than the entire thing i guess

    Thank you for your help!

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,990 Answers

You should not have to Replace the Transmission. You will however need to get it Rebuilt, Prices Vary from State to State. I am in Oklahoma any Chance that you are too?

Posted on Jan 02, 2009

  • Travis Humphries
    Travis Humphries Jan 02, 2009

    No Problem! Glad to Help!

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Which fuse controls the radio,speedometer,and also,what would cause the transmission to shift really hard,in a 1993 Ford Bronco?


Transmission problems are nortorious on the Broncos one state change to the E 40 d transmission. I myself converted mine to an old style c6 transmission in my 93 Eddie Bauer and I have never been happier.

Thanks for using FixYa - a 4 THUMBS rating is appreciated for answering your FREE question

May 10, 2014 | 1993 Ford Bronco

1 Answer

My 2000 ford expedition eddie bauer made a loud air noise while driving and cut off When i try to crank it it makes that noise again and shuts off Do you know what the problem is


check for vacuum leak should be pretty obvious, check under hood, and listen for vacuum noise while having someone start it for you, keep your self clear of engine when starting

Apr 12, 2014 | Cars & Trucks

1 Answer

Bronco


If this is a regular conversion then any adaptor plates you need will be available at speed shops that specialise in this conversion.

May 24, 2013 | Ford Cars & Trucks

1 Answer

03 eddie bauer explorer is making revving noise while in drive


sounds strange. have you checked to see if you have an exhaust leak? you also may be hearing the first clues to your catylitic converter starting to break down. Check for an exhaust leak first and let us know how it looks. Thanks

Jul 18, 2012 | 2003 Ford Explorer

1 Answer

Why won't the transmission of my 1988 Ford Bronco Eddie Bauer edition go in gear?


check the linkage hooked to side of the tranny,if everything is intact maybe one of th solenoide in the tranny has defaulted-hope that helps

Nov 06, 2010 | 1988 Ford F 250

1 Answer

1994 bronco eddie bauer. I have no brake lights


I think there are 2 switchs on that brake pedal. You are right tho about the brake switch causing your problem.
If you fix your brake light problem your other problem will be fixed also.. check to see if the wires at the brake pedal switch are energized. I am betting on a ground problem.

Dec 22, 2009 | 1994 Ford Bronco

1 Answer

Rear Window Malfunction on my 1993 Eddie Bauer Bronco I have a rear window problem on my 1993 Eddie Bauer Bronco. I rolled my rear window up last night with the rear key switch. Today it will not roll...


The dash switch can affect the operation of the rear key switch. 1st thing to do is replace the dash switch and that will prob fix it all.

Nov 16, 2009 | 1992 Ford Bronco

1 Answer

I have a 1995 eddie bauer bronc with a clank.


There is a few things that can cause that,..#1 is the axle shaft universal could be worn out and to check it grab the axle shaft and try to twist it back and forth to check if its loose..#2 could be the brake caliper loose or the brakes are moving around in the caliper,#3 also could be the radius arm bracket cracked at the radius arm itself which is about a $25.00 part (not including the bushings which are about $15.00 a set)check these things as my 94 Bronco has been through all of every sound and clunk with 230,00 miles

Mar 11, 2009 | 1995 Ford Bronco

Not finding what you are looking for?
1990 Ford Bronco Logo

165 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60792 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...