Question about 1996 Jeep Cherokee Country

2 Answers

30 amp fuse under the hood

Everytime i turn the key on or try to start my 96 jeep cherokee, the very small 30 amp fuse blow and stop it from firing up. what could cause this and what does the fuse go to? the fuse is under the hood.

Posted by on

2 Answers

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 2,110 Answers

If the fuse keeps blowing chances are that there is a short in the circuit. check the harness related to fuel system.

Posted on Jan 02, 2009

  • Sibananda Jena
    Sibananda Jena Jan 02, 2009

    get the codes scanned for the check engine light and what fuse is it that u are replacing what amps? the one for the blower motor is 40 amp i doubt turn signal bulbs use a 40 amps fuse. IS the fuse inside or outside plus do u have auto temp controls?

×

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    President:

    An expert whose answer got voted for 500 times.

  • Master
  • 1,990 Answers

Welcome to Fixya! Hello! My name is Travis and I will be Helping you tonight.Ok, When you open the Box for the Fuses under the Hood look on the Inside of the Lid, That will tell you which Fuse that is for. It very well could be the Fuse for the Starter. That would keep it from getting Power and Firing. Could also be a Short in the Wires going to the Starter. Let me know which Fuse we are talking about.

Posted on Jan 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Gages dont work, 20 amp fuse under hood keeps blowing. turn key motor turns but dont start


Is it the ecm fuse. Check the o2 sensor wires. On this model sometimes they rub on the rear driveshaft and blow fuses.

Jul 25, 2010 | 1996 Jeep Grand Cherokee

1 Answer

1995 jeep grand cherokee wont start


IF THE FUSE BLOWS IMMEDIATELY, THE VEHICLE HAS A SHORT IN THAT CIRCUIT. CAR WON'T RUN WITH A SHORTED ECM. CHECK THE WIRING FIRST FOR A BARE OR PINCHED WIRE.

Aug 25, 2009 | 1995 Jeep Grand Cherokee

1 Answer

96 jeep cherokee, replace cps and the engine control fuse


The guy at the garage today, said he went out and put a fuse in it and it started right up. Thats all he did for now. I going to have a closer look on the weekend. But, as before when I went 1/2 mile it would burn the fuse again. We will have to see if it does again, I espect it will. Any idea?

Mar 26, 2009 | 1996 Jeep Grand Cherokee

1 Answer

1998 Jeep Cherokee blown fuse


Hello There

15 Amp sounds too small. It should be around 25 -30 Amp. You need to double check the size of fuse needed.

Hope this helps.

Mar 15, 2009 | 1998 Jeep Cherokee

2 Answers

1996 jeep grand cherokee limited won't start alarm keep flashing


try the 15 amp fuse under the hood by the battery if its blown put in a 20.
turn on the key and wait for all the ligth to go out then try it if it dosnt start the first time do it a 2nd same thing
hope it helps

Feb 26, 2009 | 1996 Jeep Grand Cherokee

2 Answers

96 jeep grand cherokee


If it is the fuse for major engine control electronics that is blowing (PCM, etc.) as soon after energizing, try disconnecting the O2 sensors. The 12V heater in the sensor could be shorting to ground.

Nov 17, 2008 | 1996 Jeep Grand Cherokee

1 Answer

30 amp fuse under hood


if the fuse keeps blowing chances are that there is a short in the circuit. check the harness related to fuel system.

Aug 02, 2008 | 1996 Jeep Cherokee Sport

1 Answer

30 amp fuse/ in box under hood


The 30 amp fuse is most likely for your starter. Check that the red thick wire (could be black as well) leading to the starter and starter solenoid is properly attached and is not touching anything that would short it out and therefore blow the 30 amp fuse. The short may even be inside the starter in which case it will need to be replaced or repaired. Hope this helps.
Alex

Jul 09, 2008 | 1996 Jeep Cherokee Sport

Not finding what you are looking for?
1996 Jeep Cherokee Country Logo

Related Topics:

57 people viewed this question

Ask a Question

Usually answered in minutes!

Top Jeep Experts

yadayada
yadayada

Level 3 Expert

74418 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22082 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

7254 Answers

Are you a Jeep Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...