Question about 1994 Chevrolet C1500

1 Answer

Timing a 94 chev truck with a 350 engine with a timing lilght

What are the steps to time a 1994 chev truck with a 350 engine with a timing light?

Posted by on

  • Anonymous Mar 23, 2014

    put a different bed own truck hooked all wires up but 3 of the conection have fire all the time was not doing it before I took bed off truck would a ground problem cause this would a head light switch cause it two have contious fire own the wires

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Chevrolet Master
  • 21,936 Answers

Engine idle and then check strobe light to mark on crank ,then slowly rev engine to check advance ,it should move

Posted on Jan 17, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Does the engine have to be pulled to replace the freeze plugs on the back of the block on 94 chev 1500 , 4.3 ltr pickup


its a tight fit but you can go in between the motor & firewall without pulling the motor. if that dosnt work it takes half the time to pull the transmition and bell housing , get it out of your way and your home free

Oct 19, 2011 | 1994 Chevrolet C1500

1 Answer

Flat rate for 94 chev van g20 w/350 ; replace engine oil cooler flex lines


alldata reports just over 1 hour to replace both lines

Jul 14, 2011 | 1994 Chevrolet G20

3 Answers

94 chevy 5.7 350 need to reset timing what do i need to do?


start engine and bring to normal operating temp. unplug the base timing connector located in the distributor wiring harness tan wire with a black stripe use a timing light and set timing to 0 degrees at idle the timing marks are on the crankshaft pulley and a tab on the timing cover with numerical indications

Jan 01, 2010 | 1994 Chevrolet Silverado 2500

1 Answer

1994 Chev Cavalier - engine light comes on randomly


One cause of the light to come on randomly is a loose gas cap. If it's not replaced tightly (turned until it clicks three or four times) it throws the light on. It's one thing to check anyway.

Nov 30, 2009 | 1994 Chevrolet Cavalier

1 Answer

It's daylight savings time! How do I change the time on my stock radio in my 94 Chev C1500? I have no manual


Turn the radio power off. Then press the set button. Then press the volume and/or scan buttons to change hour and mins.

Nov 01, 2009 | 1994 Chevrolet C1500

1 Answer

94 chevy 1500, 350 engine. putters after start


check your vacuum lines they are weather cracked and leak vacuum air

Oct 07, 2009 | 1994 Chevrolet K1500

1 Answer

Where is the ignition timing bypass connector on a 1994 Chev. Silverado CK2500? After putting in a new distributor, now trying to set the timing. Need to find the bypass connector in order to override...


I think 94 is still OBD1 computer system. Have you ever run codes on it? If so the diagnostics terminal will over ride the computer when running so you can set timing. Just get a .99 cent code key from Autozone or use a paperclip.

Jul 27, 2009 | 1994 Chevrolet C2500

1 Answer

1994 chev silverado 1/2 ton 4wd 5.7 350 automatic


Have you checked to make sure the catylitic convertor isn"t plugged? Disconnect the exhaust and rev the engine is there a difference? Good Luck!

Dec 09, 2008 | Chevrolet Silverado 1500 Cars & Trucks

Not finding what you are looking for?
1994 Chevrolet C1500 Logo

Related Topics:

280 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...