Question about 2005 Pontiac G6

2 Answers

I have a 2006 G6 and the remote starter recently stopped working. The remote will lock and unlock the doors but when I hit the lock and then starter button on the remote the lights will just flash and you could hear a humming noise..

Posted by on

  • Anonymous Mar 13, 2014

    It just won't start it unlocks locks all the buttons make the lights flash but no crank. Its a dodge Dakota 00 4.7l

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I had that happen once, for an entire year I was mad my remote start wouldn't work I thought I messed something up or forgot to put something back when installing headers on my 06 gt. It turned out wen my kid used the car as a jungle gym he messed up my settings in the radio and turned off remote start go threw ur menu and turn remote start back on. I no thatl fix it because I had exact same lights flash and slight hum/buzz like it wanted to work

Posted on Apr 08, 2012

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 83 Answers

You can only start the car starter three time before pcm disables the function must start agin with key to get working. also may have diabled car starter by dic comands on radio also if you have engine light on will not operate car starter due to light.

Posted on Jan 03, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have 4 remote for my car. All will not unlock the doors.


maybe its something to do with door sensors

Apr 07, 2015 | 2007 Pontiac G6

1 Answer

Hi, I got up this morning to get into my 2006 Pontiac G6. I hit the remote to unlock the door and it didnt respond. I then opened it using key and no power to the car what so ever. I tried jumping it and...


By no power, do you mean the lights and other accessories don't even work? If so, I'm not sure that's a security system -- they usually only kill the starter, but I'm not sure about that one specifically. Try arming and disarming the system and see if it works then. If no interior lights are working, etc. you probably have a very dead battery or possibly a bad connection. Hook up the jumper cables again but leave them on with the working car running for 10 min or so, then try to start it. Batteries can get so dead that they won't jump right away, especially with light-duty cables.

Nov 19, 2009 | 2006 Pontiac G6

1 Answer

Lock, unlock and keyless starter problems


The fob can get dirty inside reducing it's function. You can clean it inside with electrical contact cleaner. Your dealers parts department can test it, usualy for free. Good Luck

May 28, 2009 | 2006 Pontiac G6

2 Answers

Remote start


first make sure you have the keyless start entry setup. if u do then you need to lock the door with the transmitter after you lock the door press the start button and hold it down until it starts. It usually takes three or four seconds.

Mar 16, 2009 | 2005 Pontiac G6

1 Answer

My remote starter just stop working


IF YOU HAD IT DONE BY THE DEALERSHIP THERE SHOULD BE 2 SWITCHES ON THE DRIVER SIDE RIGHT WHERE THE INSIDE DOOR TRIM IS. IT SITS USUALLY UNDERNEATH THE HOOD LATCH RELEASE HANDLE. IN MY CAR ONE SWITCH IS RED AND THAT OPERATES THE REMOTE STARTER AND THE OTHER, BLACK ONE IS AN ALARM ON\OFF SWITCH.

Dec 18, 2008 | 2006 Pontiac G6

4 Answers

Remote starter does not work but will unlock and lock doors.


I have a 2003 sierra and my remote starter would not work, it would lock and unlock only, checked out this site found the solution, tried it and in two seconds i solved the problem, Just press the lock button and the start button and viola it works again, thanks for all your help , GGGreat site glad i found it John

Dec 08, 2008 | 2005 Pontiac G6

1 Answer

We have a 2007 Entourage and you cannot lock it with the car running. We installed a remote starter and it will not lock the doors when it is remotely started. Can this feature be disabled?


i think that this is to prevent you from locking your keys in the car with the engine running.
Some remote starters have a feature that when the car is running (and in park) you can hit the remote start button twice for one second each - then you can take the key out of the ignition and still have the car running.
At this point....if you would hit the 'lock' button on your door the doors would immediately unlock. However, if you get out of the car and close the door leaving it unlocked and then you hit the 'lock' on your original car remote the doors will lock and stay locked. So now the car is running the doors are locked and you have the keys in your hands. Then you can run into the store or house real quick with your car locked.
Once you come back, you hit 'unlock' on the original car remote. the doors will unlock - you can get it - and then before hitting the brake put the key in the ignition and turn it (dont crank it) as if you had when originally using the remote starter.
Maybe this will work for you.....

Oct 14, 2008 | 2007 Hyundai Entourage Limited Minivan

1 Answer

Keyless remote


Don't know for sure it will work with your but try this.

  1. Close all the vehicle doors.
  2. Insert the ignition key into the ignition lock cylinder.
  3. Press and hold the door unlock switch.
  4. While holding the door lock switch in the unlock position, cycle the ignition ON, OFF, ON, OFF.
  5. Release the door unlock switch. The doors will lock and unlock to confirm the program mode.
  6. Press and hold the LOCK button and the UNLOCK button simultaneously on one transmitter. After a delay of approximately 15 seconds, the doors will lock and unlock to confirm the programming of that transmitter.
  7. Repeat the previous step to program up to four transmitters.
  8. Turn the ignition switch to the RUN position in order to exit the keyless entry transmitter mode.
  9. Operate the transmitter functions in order to verify correct system operation.

Sep 25, 2008 | 2006 Pontiac G6

Not finding what you are looking for?
2005 Pontiac G6 Logo

759 people viewed this question

Ask a Question

Usually answered in minutes!

Top Pontiac Experts

yadayada
yadayada

Level 3 Expert

61168 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Pontiac Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...