Question about 1992 Chevrolet S-10 Blazer

1 Answer

Leaking oil from remote oil filter at oil pan

1992 chevy s=10 blazer

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Hot-Shot:

    An expert who has answered 20 questions.

  • Expert
  • 180 Answers

Need new o rings, PAY CLOSE ATTEN> TO LINES AS THESE ARE GETTING OLD AND WILL BE CAUESING YOU PROBLEMS.

Posted on Jan 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1989 Chevy S10 Blazer 4.3L V6 Automatic: Massive coolant leak occurred after letting truck sit for about 30 minutes after running it for around 1 hour. Coolant steadily flowed from what appears to be on...


Check the bottom side of the water pump for wetness, as well as the lower radiator hose. The water pump if leaking, will run the coolant down the front of the motor,and can appear to be coming from the top of the oil pan. It is nearly impossible for the top of the oil pan to leak coolant.

Aug 19, 2011 | 1989 Chevrolet S-10 Blazer

1 Answer

Trying to remove oil pan from 1989 chevy 1500 350 eng to replace the gasket can you help me?


2wd Models
  1. Disconnect the negative battery cable. Drain the engine oil.
  2. Remove the oil dipstick.
  3. If necessary remove the exhaust pipe crossover.
  4. If equipped with automatic transmission, remove the converter housing pan and the transmission oil cooler line retainer from the bracket.
  5. On 1996-98 models, remove the oil filter and if equipped, the oil filter adapter.
  6. If necessary, remove the starter brace and bolt and swing the starter aside.
  7. Remove the strut rods, if equipped.
  8. Remove the oil pan and discard the gaskets.
To install:
  1. Apply a suitable sealant such as GM part number 12346192 or its equivalent to the front cover-to-block joint and to the rear crankshaft seal-to-block joint. Apply the sealant about 1 inch (25mm) in both directions from each of the four corners.
  2. Clean all gasket surfaces and use new gaskets to assemble.
  3. Install new gasket and seals.
  4. Install the oil pan.
  5. On 1988-95 models, tighten the pan bolts to 100 inch lbs. (11 Nm). Tighten the pan nuts to 17 ft. lbs. (23 Nm).
  6. On 1996-98 models, tighten the oil pan nuts and bolts to 18 ft. lbs. (25 Nm).
  7. Install the strut rods, if equipped.
  8. If removed, install starter, starter brace and bolt.
  9. If equipped, install the oil filter adapter.
  10. If removed, install the oil filter.
  11. If equipped with automatic transmission, install the converter housing pan and the transmission oil cooler line retainer to the bracket.
  12. Install the exhaust pipe crossover.
  13. Install the oil dipstick.
  14. Fill the engine with oil and check for leaks.

Aug 07, 2010 | 1989 Chevrolet S-10 Blazer

1 Answer

Replace valve body


Remove transmission oil pan, and then remove tranmission filter. The valve body is above filter.

Feb 21, 2010 | 1993 Chevrolet S-10 Blazer

2 Answers

How many quarts of motor oil does a 92 chevy s10 blazer hold


4.5 to 5 qts. It depends on how long you let it drain!

Nov 04, 2009 | 1992 Chevrolet S-10 Blazer

1 Answer

The Oil pan leaks on my 92 Chevy G20 how difficult is it to replace?


first drain the oil out. then undo all the bolts on the sump(oil pan). then pry it away from the block gentily. replace gasket. put back the sump and bolt it up and put new oil and filter on

Jul 06, 2009 | 1992 Chevrolet G20

1 Answer

Location of oil pressure switch in a chevy blazer s-10 1992


should be close to the oil filter or where the oil lines going to the filter attach to the engine block

Jun 18, 2009 | Chevrolet Blazer Cars & Trucks

1 Answer

4L60E won't shift to 3rd on 1993 Chevy Blazer


Hello;
It sounds as though your trans is going out. How is reverse? If reverse is real strong then you may just have a solenoid going out. Drop the pan and change the oil and filter if you are comfortable doing that. Inspect the pan for metal shavings and contaminents. Otherwise it would need to go to a shop for repair.
Thanks;
Rich
RPM Northwest

Jun 01, 2009 | 1993 Chevrolet S-10 Blazer

1 Answer

Chevy Blazer 1992 Oil Pump Change


you have to drop the oil pan to get to it...once the oil pan is off there are 2 bolts that holdthe pump in place,,,you will also need a new screen for the new pump.

Jan 03, 2009 | 1999 Chevrolet Blazer

Not finding what you are looking for?
1992 Chevrolet S-10 Blazer Logo

Related Topics:

158 people viewed this question

Ask a Question

Usually answered in minutes!

Top Chevrolet Experts

yadayada
yadayada

Level 3 Expert

63572 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21981 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6812 Answers

Are you a Chevrolet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...