Question about 1994 Ford F150 Styleside Supercab

1 Answer

My f150 want start ford f150 truck

Turned ignition key on and lost all electric. checked all fuses in power
distribution box and fuses in dashboard box all ok. battery is putting
out 12volts.

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    Hot-Shot:

    An expert who has answered 20 questions.

    Corporal:

    An expert that hasĀ over 10 points.

    Mayor:

    An expert whose answer gotĀ voted for 2 times.

  • Expert
  • 62 Answers

I would buy a new solenoid there only about ten bucks and usually what goes bad. also check the connections. I hope that helps you out.

Posted on Jan 02, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

The right hand corner of my fuse box under the hood has no power tested using test lite checked fuses what do I do it's on 2001 grandam GT with 3400 engine


What powers that side of the fuse box ? Do you know ? Do you know what a power distribution diagram is ? You need to look at a diagram to see where those fuse's get there power ! Could be only powered when the ignition switch is on ! Suggest you view wiring diagrams . Do you know how to do electrical testing ? With a volt meter . Electric Testing Techniques You Need to Know

The Trainer 32 How To Read An Automotive Block Wiring Diagram

View wiring diagrams here http://www.bbbind.com/free_tsb.html

Enter vehicle info year , make , model and engine size . Under system click on electrical distribution , under subsystem click on power distribution . Click the search button , then click on the blue link. Look at the second diagram down . You'll see a IGN SW - BATT 2 30 amp fuse powers the ignition switch .In the on position the ignition switch powers the under hood fuse box . are you testing with the key on ? You also have a right instrument panel an a left instrument panel fuse box , do you know about these ? What is your main problem ? No start ?

Mar 30, 2017 | Cars & Trucks

2 Answers

Lost power to Headlights, Turn signals, AC Fan and Wipers all at the same time!


What make vehicle ,model an year ? Most newer vehicles the ignition switch is an input to a module an the module BCM -body control module energizes relays that power up the vehicle systems . .You can go to www.bbbind.com for free wiring diagrams an power distribution diagrams an see what these systems have in common , it could also be a ground side problem . On the home page at bbbind click on technical information , five box will pop up . click on tsb's an free wiring diagrams. Next page go to the bottom an click I agree . On the next page click wiring diagrams an then enter your vehicle info. Under system click on electric distribution ,subsystem click power distribution first ,then go back an check ground distribution

Dec 02, 2015 | AC Cars & Trucks

1 Answer

How to change fuel pump fuse 2002 ford f150


go to 2002 ford f150 owners manual and download it free from ford then go inside the manual to road side emergencies the fuse diagrams for the passenger and power distribution box are there and so is the fuse location also check for fuel inertia switch in case you got hit and press the reset button in and the car will start again

Feb 17, 2015 | 2002 Ford F150 Regular Cab

1 Answer

My ford escape wont start no bells no whistles but battery is strong only the air bvag light on the dash comes on


Turning the key to on, no warning lights or dash gauges come on? That sounds like the ignition switch is not working, or power is not getting to the switch. Power for the switch would likely come from a maxi fuse under the hood. So check all your fuses as a start. If fuses are good, one will have to check the ignition switch for power in and power out, when key is turned to on. Use a test light, pull the ignition switch electrical connector apart. On the harness side of the connector, probe all the terminals in the connector. One wire should be the hot wire to the switch-hot at all times-just waiting for the switch to send power out to make things work. If you have a hot wire there, plug connector together, turn key to on, and backprobe the electrical connector, looking for power out on the run wire. The start wire (going to the starter solenoid) will have power when key is held in start. Too many wires? Confused? Keep probing-all you looking for is power in on one wire, and power out on one or maybe two wires with key on. If no power out, the switch must be bad. If no power in, the electrical distribution system will have to be checked-back to the power distribution center under the hood where the maxi fuses are.
Post back if not clear, or if you need more help. Always appreciate a reply. Good luck.

Dec 20, 2013 | Cars & Trucks

1 Answer

No start or no electrical power inside or outside of the vehicle


No headlights, horn, or brake lights? I would expect nothing at the ignition switch, either, then? No warning lights or gauges with key on?

Any chance the battery is discharged? It would have to be very low or dead if connections are clean and tight. Inspect the cables, take them off and clean the terminals of corrosion, tighten them down good. Check the ground where it bolts to metal-if not a good ground, power will not flow. From the battery, power is sent through fuse links and maxi fuses in the power distribution box, to distribute power through all the car's circuits. Either a fuse link or a maxi fuse will send power to the ignition switch. Another will send power to the headlight switch, and another will send power to the fuse panel under the dash, powering those fuses that are hot at all times (like the brake lights and horn).
It sounds like your power is not getting from the battery to the power distribution box, if just nothing works. Bad battery or bad connection, possibly.

Sep 07, 2013 | 1999 Ford Escort

1 Answer

Were are the fuses located for the power point and the cig lighter on the dashboard of a 2000 excursion


locate the fuse panel .
The fuse panel is located below and to the left of the steering wheel by the brake pedal.

Remove the panel cover to access the fuses.
count starts from upper left corer going down.
fuse #3 Yellow is a 20A used for Cigar Lighter,also used for Data Link Connector


find the Power distribution box. The power distribution box is located in the engine compartment near the bBrake fluid reservoir.
The power distribution box contains high-current fuses that protect your
vehicle's main electrical systems from overloads.
realay #5 a 20A Mini fuse used for the Instrument Panel Auxiliary Power Point

NOTE:
Always disconnect the battery before servicing high current fuses.
Always replace the cover to the Power Distribution Box before reconnecting the battery or .
If the battery has been disconnected and reconnected, make sure u follow idle otor setup.

Nov 24, 2010 | 2000 Ford Excursion

1 Answer

2004 f150 will not start need to find where the fuel pump fuse is


FUEL PUMP FUSE IS A 20 AMP FUSE LOCATED POWER DISTRIBUTION BOX INNER FENDERWELL IN THE ENGINE COMPARTMENT.ALSO CHECK THE INERTIA SWITCH LOCATED BEHIND PASSENGER SIDE KICK PANELTHIS WILL SHUT OFF FUEL PUMP.IF YOU RUN OVER A POT HOLE OR SOMETHING.CHECK TO SEE IF SWITCH BEEN KICKED OFF.AND RESET IT.

Mar 28, 2010 | 2004 Ford F150

1 Answer

I need a fuse box diagram for a 1992 Ford Ranger. Any idea where I could find one?


owner manual.

here's the big ones for 1994 ranger. all i have
Section 18-01: Wiring and Circuit Protection 1994 All Ranger, Explorer and Aerostar Vehicles Workshop Manual
SPECIFICATIONS Specifications

High Current Fuses And Circuit Breaker — Ranger 2.3L, 3.0L And 4.0L
Circuit Size Location Electric Fuel Pump 20 Amp Fuse Power Distribution Box Headlamp Switch Feed 40 Amp High
Current Fuse Power Distribution Box #36 Circuit Alternator Output #2 15 Amp Fuse Power Distribution Box Fuse Panel 60 Amp High
Current Fuse Power Distribution Box Power Locks 20 Amp High
Current Fuse Power Distribution Box #38 Circuit Alternator Output #1 12 Ga Fusible
Link Integral with 14305 W/A Powertrain Control Module and Power Relay 30 Amp High
Current Fuse Power Distribution Box 4x4 Electric Shift 20 Amp High
Current Fuse Power Distribution Box Ignition Switch Feed 60 Amp High
Current Fuse Power Distribution Box High Beams and High Beam Indicator 22 Amp C.B. Integral with Headlamp Switch Front Wiper and Washer 6 Amp C.B. In Fuse Panel Power Windows 30 Amp C.B. In Fuse Panel Cigarette Lighter, Flash to Pass and Power Lumbar 20 Amp C.B. In Fuse Panel


29af2f7.gif
e4cf291.gif

May 13, 2009 | 1992 Ford Ranger

Not finding what you are looking for?
1994 Ford F150 Styleside Supercab Logo

140 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

70387 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Ron Lankford

Level 3 Expert

5386 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...