Question about 2003 Ford F350 Super Duty DRW SuperCab

2 Answers

I have a 2000 fisher plow. i have been having a problem that is intermitent. when i went to use it the the plow could not go up, down or side to side. i drained the fluid, cleaned the pump, and then tried to use it again and it continued with the same problem. the next a.m. i hooked it back up and the plow was running fine. plowed for about ten min. and then it stopped working again. unhooked for the nite. the next a.m., hooked it back up (i did nothing to it) and it worked fine and i ran all day with no problems. went to use it again last night(new years eve) and once again it would not work. any help you could give me would be greatly appreciated. thanks

Posted by on

  • Lyle Mar 20, 2013

    Did you ever find a fix for this problem ?

×

2 Answers

  • Level 1:

    An expert who has achieved level 1.

  • Contributor
  • 1 Answer

I was putting on an extra solenoid I had and grounded the one in use with my wrench but the down pressure didn't work before that ether would that have messed up the solenoid?

Posted on Jan 30, 2015

  • David Jan 30, 2015

    The solenoid sparked when my wrench hit the body would that mess up the solenoid

×

  • Level 1:

    An expert who has achieved level 1.

    Mayor:

    An expert whose answer got voted for 2 times.

    Problem Solver:

    An expert who has answered 5 questions.

  • Contributor
  • 4 Answers

If it makes klic,klic,klic sound it may be the solenoid relay it cost about $30,try that

Posted on Jan 26, 2009

  • vruge21 Nov 30, 2009

    i have a Meyer try the solenoid it may be it

×

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have a minute mount plow, when I try to use it only goes to left and right side but doesn't go up, when I try to lift the plow goes to the right. What can I do


2002 Fisher Minute Mount Inst-Act Wont Angle [Archive] - PlowSite ...

www.plowsite.com > ... > Truck & Equipment Repair

Nov 17, 2011 - 90 posts - ‎9 authors
My plow went up it was jerking and did it in steps , but , it got there . Now , it onlyjerks when i try to angle it right or left or up . I filled the fluid ... Drop it and if it doesn'traise you can just use a jack and shorten the transport chain to hold it. .... I do havecontinuity on the plow side for all 3 wires going to the plug . Hooking Up A Fisher Minute Mount 2 In Under 1 ...
54 posts
Feb 1, 2011
Plow Wont Angle
32 posts
Oct 19, 2010
What's wrong with my plow?
21 posts
Jan 9, 2003
Looking For Minute Mount Tips
57 posts
Feb 13, 2002
More results from www.plowsite.com

Ultramount Intermittent Angle Problem - Snow Plow Forum - L


Dec 27, 2015 | Cars & Trucks

1 Answer

My fisher minuteman 2 plow will go up and left and right but will not go down


Most of those systems don't have a driven retraction on the piston. It is gravity feed back. There is a valve that is sticking or out of adjustment. http://library.fisherplows.com/?cat=38

Jan 24, 2015 | Cars & Trucks

2 Answers

I have a fisher minuteman plow it will go up, left and right but will not go down what is wrong with my plow


If you have a Minit Mount two it's probably the valve sticking. It's electronically controlled so if it clicks, then the solenoid is working and the shuttle in the valve is stuck. Can be disassembled and cleaned. New ones are best but pricey.

Jan 24, 2015 | Cars & Trucks

1 Answer

Fisher plow lock up when training right or left.


Have a 2004 hmm and plow went up and down but jerked left to right but did not turn , found it to be wire harness going thru fire wall , sheet metal wore thru wires shorting them out , pulled harness thru and shrink rapped and hooked back up been working fine.

Nov 14, 2014 | Cars & Trucks

1 Answer

I have a Fisher 8' plow. The up and down have been extremely slow. On top of the motor I noticed a screw, possible bleeder? I loosened this and tried the controls .worked perfectly, but when I tightened it...


Im an automechanic by trade, and know nothing about plows or tractors, although some knowlege might apply to both. I suspect that screw adjusts the speed of its relitive lever, there are probably more for each lever. If it works, go for it. I see no problems arising, but again I know little about tractors or plows, but lots about mechanicals and how stuff works. Put the screw where you want it, and ride on!

Dec 16, 2013 | 2003 Ford F350 Super Duty DRW SuperCab

2 Answers

My fisher plow will not go up or down? The motor is making a clicking noise. What could it be?


could be bad solenoid,or low on fluid?also clean, and check electrical connections

Jan 27, 2011 | 2000 Chevrolet 2500

1 Answer

Hi, I have a 2000 dodge ram and when i plug my fisher plow up only one light works on the plow and one on the truck .when the plow is un hooked from the truck all the truck lighs work,and when i hook up...


There is a ground that is deteriorated in the harness. trace the ground lead back from the connection to your truck. Once you find the break, that should take care of your problem.

It is also possible to be a power lead, so check them also, but more often than not it is a ground.l

Hope this helps.

Dec 14, 2009 | 2001 Dodge Ram 2500 Truck

2 Answers

My fisher plow wont work after i hitch it up .... i can hear the sylinoid click but nothing moves ... was working then all of a sudden wont


my meyer plow well not go up or down and well not go side to side , it does make a clicking sound , what wrong with it

Nov 01, 2009 | 1998 Chevrolet C1500

Not finding what you are looking for?
2003 Ford F350 Super Duty DRW SuperCab Logo

408 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

61037 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...