Question about 2001 Ford F250 Super Duty Super Cab

1 Answer

Need diagram for f250 v-10 serpintine belt

2 wheel drive with ac

Posted by on

1 Answer

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that gotĀ 5 achievements.

    Governor:

    An expert whose answer gotĀ voted for 20 times.

    Scholar:

    An expert who has written 20 answers of more than 400 characters.

  • Expert
  • 71 Answers

Look the fan shroud or radiator cover for a picture of the belt diagram;

If not there, you can thread the belt behind the fan then you can thread it over a blade and turn the fan, thus not having to remove the fan. Once the fan issue is resolved or not an issue and you cannot find the threading picture, then you can use your common sense to figure that the belt must be driven by the crankshaft and look at the ridges on the belt to decide which side of the next pulley that needs power and continue this process over and around each auxilary unit until you are sure of the threading then put your 1/2 drive ratchet into the tensioner and move (raise or lower) it asside making sure that all the little ridges are in place on the ridged pulleys then release the tensioner. That should do it.
good luck

Posted on Jan 01, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Need serpintine belt diagram for 2001 aud A6 quatro


The serpentine belt diagram for 2001 aud A6 Quattro 2.8 liters V6 engine:

8e9241e.jpg
CS = Crankshaft
F = Fan pulley
Gen = Alternator
T = Tensioner
AC = Air Conditioning
PAS = Power Assisted Steering

Oct 14, 2010 | 2000 Audi A6

1 Answer

I need a diagram for a installing a serpintine belt in a 2005 toyota tacoma


Depends on engine. Copied below diagrams from AutoZone.com:

Drive Belt Routings




0996b43f80209580.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Accessory drive belt routing-2.4L engine



0996b43f80209581.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Accessory drive belt routing-2.7L (3RZ-FE/M) engine



0996b43f8020209e.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Accessory drive belt routing-2.7L (2TR-FE) engine



0996b43f80209582.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Accessory drive belt routing-3.4L engine

Aug 26, 2010 | 2005 Toyota Tacoma

1 Answer

Need diagram for a 2005 mustang 4.0 liter for serpintine belt


Hope this helps ya.. Cobra.. :-)

4c0dd78.jpg

Item Part Number Description 1 10300 Generator pulley 2 3A733 Power steering pump pulley 3 2E884 A/C compressor pulley 4 8509 Coolant pump pulley 5 6B321 Crankshaft pulley 6 6B209 Accessory drive belt tensioner pulley 7 8678 Accessory drive belt idler pulley 8 8620 Accessory drive belt

Jun 14, 2010 | 2005 Ford Mustang

1 Answer

Need a serpintine belt routing diagram for a 2006 toyota 4runner with a 4.0 liter engine


2006 TOYOTA 4RUNNER - V6 4.0L 3956cc GAS FI N 1GRFE
Belt Routing Diagram - Multiple Accessory, w/A.C.

d37ec2f.jpg

From DAYCO Products Catalog

Hope help with this (remember rated this post). Good luck.

May 19, 2010 | 2006 Toyota 4Runner

1 Answer

I need a diagram for the drive belt for a 1992 chevy s10 blazer with ac 2 wheel drive


go to autozone.com there you can get a diagram for the belt route, hope this helps

Dec 13, 2009 | 1992 Chevrolet S-10

1 Answer

Need the diagram for a serpintine belt on a 2000


There are 2 possible engines for your Windstar, the 3.0L and the 3.8L. Below are both diagrams. Best of luck on your repair!
Greg

3.0L
6ace2c8.jpg





3.8L
186c6d0.jpg

Nov 11, 2009 | 2000 Ford Windstar

2 Answers

Serpintine belt


This link will take you to a picture of the diagram. If the link doesn't work contact me and I can email you the picture directly.

http://autorepair.about.com/library/illustrations/bl506a-lib.htm

Jan 10, 2009 | 1995 Jeep Grand Cherokee

1 Answer

Serpintine belt


Only the dealer will have the pulley, it is very straight forward, hooks up to the same holes as AC compressor, the belt diagram is under the hood near the emission sticker, that is easy as well, but you will need either a large 3/8" or 1/2" ratchet to release the belt tensinoner pulley.

Oct 29, 2008 | 1992 Buick LeSabre

Not finding what you are looking for?
2001 Ford F250 Super Duty Super Cab Logo

217 people viewed this question

Ask a Question

Usually answered in minutes!

Top Ford Experts

yadayada
yadayada

Level 3 Expert

60769 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21949 Answers

Fordexpert

Level 3 Expert

5331 Answers

Are you a Ford Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...