Question about 1995 Buick LeSabre

2 Answers

Flashing Signal Lights not working

I need to change the flashing ''Signal Lights Relay'' and I don't know where is it located. was told at the auto-parts it's under the dash by the steering-wheel but I didn't find anything that even looks alike. Let me know if you know where this relay is located... thanks.

Posted by on

2 Answers

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

    Mentor:

    An expert who has written 3 tips or uploaded 2 video tips.

  • Expert
  • 448 Answers

Turn on your turn signals and listen under the steering wheel for a clicking relay. It could be in a 3/4 in diameter metal or plastic can. Once this is found, you will be real close to the other and be able to spot it.

Posted on Jan 04, 2009

  • Level 2:

    An expert who has achieved level 2 by getting 100 points

    MVP:

    An expert that got 5 achievements.

    Sergeant:

    An expert that has over 500 points.

    Champion:

    An expert who has answered 200 questions.

  • Expert
  • 334 Answers

You have to take the plastic off underneath the dash on the drivers side on the left side of steering wheel. This brings you to the fuse box when you get to the fuse box the flasher relay is there in the fuse box

Posted on Jan 04, 2009

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

1987. Why is there no power at the turn signal cam?


Do you have brake and parkng lights? The turnsignal switch on the column is just designed to relay a path to the flasher and then it is designed to interupt the brake and some of the parking lights lights, which cause the flashing on and off. Double check fuses double check bulb socks and bulbs for good contacts. Does the 4 ways work? If the lights all flash then locate the turn signal flasher and switch with emergency flasher if possible to rule out relay. If those are all good and the emergency flasher lights work and bulbs, then you would have a problem with the turn signal switch. Hope this all helps

Feb 22, 2016 | Ford E-150 Cars & Trucks

1 Answer

2004 Grand Am GT,Pontiac, My turn signal lights up to signal but doesn't blink and my flasher lights up and doesn't flash. Please advise


Your indicator relay has stopped working. You will need to replace the relay. If you have an owners workshop manual you can locate it yourself. Failing that ask on google for the location of the correct relay generally located in or near the fuse boxes, but can be located under the steering column. Make sure you know which is the correct relay as there maybe be the starter motor relay and others located nearby.
Good luck. S

Jan 12, 2016 | 2004 Pontiac Grand Am GT

2 Answers

Replacing the turn signal flasher relay. I have installed LED bulbs and get the extremely fast turn signal flashes. I have a relay but can not find where to install it


If its flashing really fast and all lights on the circut are working you may need a heavy duty flasher as to location,depends on vehicle but they are usually close to the under dash fuse panel

Apr 28, 2015 | Cars & Trucks

1 Answer

I don't know where the signal light flasher is located the signal lights don't flash


Your vehicle has 2 flasher relays. One for the turn signals and one for the hazard lights. The turn signal flasher relay is located on the drivers side, under the dash, mounted on the drivers (Left) side of the steering column. The hazard flasher is mounted on top of the steering column. Do not get them mixed up.

Aug 12, 2011 | 1991 Chevrolet Corsica

5 Answers

2000 taurus left turn signal flashes rapidly and the left rear turn signal lamp does not work. Does ford have burned out bulb sense circuit that would give this indication? The right side flashes normally.


Yes - the fast flashing is a warning that a bulb is burned out. Change the bulb (be careful to put it in the same as the old one as it probably is 2 bulbs in one , parking and turn/stop) and you should be fine.

Jul 08, 2011 | 2000 Ford Taurus

1 Answer

How to fix turn signal on 86 Chevy Astro Van


you don`t say but do the lights work either on the front/back on both sides.if not then it may be a fuse that needs replacing or need a bulb replacement.if the lights work but don`t flash then it sounds like a signal flasher problem.the flasher is located in the fuse panel under the dash on the drivers side.if the hazard flashers work then turn them on to find the hazard flasher by the fuse panel then you will know what the signal flasher looks like and change the signal flasher.make sure you change the one for the signals and not the hazard one.if the hazards work then i would say the signal switch is good as the hazards work through the same switch.

Apr 21, 2011 | Chevrolet Astro Cars & Trucks

2 Answers

I need a fuse panel diagram to replace the turn signal flasher. Thanks


Before replacing the flasher does the hazards work, Try wiggling the turn signal lever up and down and back and forth with the key on and the lever in each position. If the blinkers or hazards start flashing you'l need a multifuntion switch. This isnt a definative test if you get nothing you may have a blown fuse. As fas as the flasher goes, go buy one and then you will know what it looks like.

Jul 14, 2009 | 1998 Jeep Cherokee

1 Answer

Turn signal lights stop working. Neither the right or left turn signal work. Heard a noise before it stop working. The flashing started slowing down and stop blinking. Now it doesn't work at all. What


most likely its the turn signal relay. which is under the hood. in the fuse box. also make sure ur running lights are working if they are connected to the turn signal.

May 08, 2009 | 1993 Nissan Pathfinder

2 Answers

1995 buiick lesabre


Go under the dash on the driver side. There is the fuse box, and around it three screws, and a small wing. Get that cover off, and you will see the relay.

Jan 01, 2009 | 1995 Buick LeSabre

1 Answer

1992 chev 1500 signal lights and brake lights quit working


If it is the turn signal flasher it should be located in the Front seating area, driver side, driver side of steering column, behind instrument cluster, mounted in convenience center. It is possible that there could be a bad ground too. Flasher would be the first thing to check.

Nov 10, 2008 | 1992 Chevrolet C1500

Not finding what you are looking for?
1995 Buick LeSabre Logo

258 people viewed this question

Ask a Question

Usually answered in minutes!

Top Buick Experts

yadayada
yadayada

Level 3 Expert

60667 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

21936 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6811 Answers

Are you a Buick Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...