Question about 1998 Plymouth Breeze

1 Answer

1998 plymouth breeze 2.0

The plugs didn't look all that bad. The gap on a couple of them was quite a bit, but other than that, not bad. Since I had taken the battery cable loose and put it back, the check engine lite is no longer on. Im guessing that it will have to be on to read the codes. I did check all hoses and they seem to be in good shape as far as I can tell. I am going to drive it around a bit and see if I can get the check engine light to come back on. Then I will take it to napa and have them read the codes. I dont think they are open today. But probably tomorrow. I will get back with you as soon as I can.

Thanks for your help

Larry

Posted by on

  • sotanax
    sotanax Jul 10, 2012

    This is the same problem with mine, only I have run a thurough check of all systems, and there is no trouble, and the car runs beautifully. Did not try disconnecting the battery cable. May just try that.

  • sotanax
    sotanax Jul 11, 2012

    OK, removed the positive cable for five minutes and then put it back on. Have driven for a day and the light has yet to come back on.

×

1 Answer

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

    MVP:

    An expert that got 5 achievements.

  • Plymouth Master
  • 751 Answers

Sounds great!

Posted on Jan 01, 2009

1 Suggested Answer

6ya6ya
  • 2 Answers

SOURCE: I have freestanding Series 8 dishwasher. Lately during the filling cycle water hammer is occurring. How can this be resolved

Hi,
a 6ya expert can help you resolve that issue over the phone in a minute or two.
best thing about this new service is that you are never placed on hold and get to talk to real repairmen in the US.
the service is completely free and covers almost anything you can think of (from cars to computers, handyman, and even drones).
click here to download the app (for users in the US for now) and get all the help you need.
goodluck!

Posted on Jan 02, 2017

Add Your Answer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

Where is my starter and how do i take it out its a 2.4 98 plymouth breeze


That is a task you will probably want to the parts store and invest in a manual for. There may be youtube videos doing it. It will be fairly involved, and take a couple hours.

Mar 30, 2015 | 1998 Plymouth Breeze

2 Answers

My 98 plymouth breeze won't shift out of low gear and the speedometer quit working all at the same time.


You may have a bad Vehicle Speed Sensor [VSS] which is mounted on the transmission. This sensor tells the computer, transmission, and dash how fast you are going and if the signal is lost then the transmission won't know when to shift and the speedometer will quit working. There should be a related service code stored in the system that will help with the diagnosis.

Sep 08, 2010 | 1998 Plymouth Breeze

1 Answer

My wind shield wiper will not work checked the fuse ..its o k


COULD BE TWO THINGS...WIPER MOTOR FUSE,WHICH YOU CAN CHECK AND REPLACE,,OTHER WIPER MOTOR ITSELF,,WORKED OUT,BURNED OUT,,.EITHER CHECK IF POWER IS GOING TO IT,BY STRIPPING PANEL HIDING WIPER MOTOR AND RODS,CAN DO IT YOURSELF,IF YOU HAVE A BIT OF KNOW HOW.OR GARAGE TELL YOU IN ONE HOUR

May 31, 2010 | 1998 Plymouth Breeze

1 Answer

Where is th volatge regulator for 1998 plymouth breeze?


Inside your alternator, if bad alternator needs to be replace.

Jan 16, 2010 | 1998 Plymouth Breeze

1 Answer

How to change thermostat on 1998 breeze


Thermostat is found where the top radiator hose ( big hose almost 2 inches ) comes out of the top of the engine. Usually just 1 hose clamp and a couple of bolts to get at it. You will loose lots of coolant doing this if you don't drain quite a bit out of the radiator first. Most important thing is to make sure the coolant refills up under the new thermostat. If there is a big air gap (vapour lock) your engine could overheat before the new thermostat gets hot enough to open.

Nov 04, 2009 | 1998 Plymouth Breeze

2 Answers

Installed new fuel pump in 1998 plymouth breeze and can hear pump working but car is not getting any gas.


does it have a spark at the plugs?? ,need more information ,but a rough guess is the flexable hose that connects the pump to the unit is split or perished or you just forgot to reconnect it or tighten the clip tight enough

Sep 19, 2009 | 1998 Plymouth Breeze

1 Answer

1998 Plymouth Breeze


change your sparkplug wires that will salve yor problem

Sep 16, 2008 | 1998 Plymouth Breeze

1 Answer

1998 plymouth Breeze


Timing belt has nothing to do with fuel issue. If you're only running on 2 cylinders...you need to find out if spark is missing from those cylinders. Also possible that when the timing belt was replaced, it was not timed properly which can bend a valve, causing rough running.

Jun 17, 2008 | 1996 Plymouth Breeze

Not finding what you are looking for?
1998 Plymouth Breeze Logo

98 people viewed this question

Ask a Question

Usually answered in minutes!

Top Plymouth Experts

yadayada
yadayada

Level 3 Expert

70346 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22041 Answers

Jeff Turcotte
Jeff Turcotte

Level 3 Expert

6864 Answers

Are you a Plymouth Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...